National Institute Of Materials Physics - Romania

In our work, the kinetics of martensitic transformations and the influence of thermal treatments on martensitic transformations, as well as the related magnetic properties of the Ni49Mn32Ga19 ferromagnetic shape memory melt-spun ribbons, have been investigated. Thermal treatments at 673 K for 1, 4 and 8 h can be considered an instrument for fine-tuning the performance parameters of alloys. One-hour thermal treatments promote an improvement in the crystallinity of these otherwise highly textured ribbons, reducing internal defects and stress induced by the melt-spinning technique. Longer thermal treatments induce an important magnetization rise concomitantly with a slight and continuous increase in martensitic temperatures and transformation enthalpy. The activation energy, evaluated from differential scanning calorimeter experimental data with a Friedman model, significantly increases after thermal treatments as a result of the multi-phase coexistence and stabilization of the non-modulated martensitic phase, which increases the reverse martensitic transformation hindrance.

Due to the great significance of amino acids, a substantial number of research studies has been directed toward the development of effective and reliable platforms for their evaluation, detection, and identification. In order to support these studies, a new electrochemical platform based on PANI/ZnO nanowires' modified carbon inks screen-printed electrodes was developed for qualitative analysis of electroactive amino acids, with emphasis on tyrosine (Tyr) and tryptophan (Trp). A comparative investigation of the carbon ink before and after modification with the PANI/ZnO was performed by scanning electron microscopy and by Raman spectroscopy, confirming the presence of PANI and ZnO nanowires. Electrochemical investigations by cyclic voltammetry and electrochemical impedance spectroscopy have shown a higher charge-transfer rate constant, which is reflected into lower charge-transfer resistance and higher capacitance values for the PANI/ZnO modified ink when compared to the simple carbon screen-printed electrode. In order to demonstrate the electrochemical performances of the PANI/ZnO nanowires' modified carbon inks screen-printed electrodes for amino acids analysis, differential pulse voltammograms were obtained in individual and mixed solutions of electroactive amino acids. It has been shown that the PANI/ZnO nanowires' modified carbon inks screen-printed electrodes allowed for tyrosine and tryptophan a peak separation of more than 100 mV, enabling their screening and identification in mixed solutions, which is essential for the electrochemical analysis of proteins within the proteomics research field.

The iron oxide nanoparticles coated with different surface coatings were studied and characterized by multiple physicochemical and biological methods. The present paper aims at estimating the toxicity in vitro and in vivo of dextran coated iron oxide aqueous magnetic fluids. The in vitro studies were conducted by quantifying the viability of HeLa cells after their incubation with the samples (concentrations of 62.5-125-250-500 mu g/mL at different time intervals). The estimation of the toxicity in vivo of administering dextran coated iron oxide aqueous magnetic fluids (DIO-AMF) with hydrodynamic diameter of 25.73 +/- 4 nm to Male Brown Norway rats has been made. Different concentrations (62.5-125-250-500 mu g/mL) of dextran coated iron oxide aqueous magnetic fluids were administered for 7 consecutive days. Hematology and biochemistry of the Male Brown Norway rats assessment was performed at various time intervals (24-72 h and 21-28 days) after intra-peritoneal injection. The results showed that high concentrations of DIO-AMF (250 and 500 mu g/mL) significantly increased white blood cells, red blood cells, hemoglobin and hematocrit compared to the values obtained for the control group (p < 0.05). Moreover, following the administration of DIO-AMF, the levels of alkaline phosphatase and aspartate aminotransferase increased compared to the control group (p < 0.05). After DIO-AMF administration, no significant difference was observed in the levels of alanine aminotransferase, gamma-glutamyl transpeptidase, urea and creatinine compared to the control group (p < 0.05). The results of the present study showed that dextran coated iron oxide aqueous magnetic fluids in concentrations lower than 250 mu g/mL are reliable for medical and pharmaceutical applications.

The objective of this study consisted of the development of new materials with antimicrobial properties at the nanometric scale that could lead to an increase in therapeutic efficacy and reduction of toxic side effects. This work focuses on obtaining and characterizing stable suspensions with narrow size distribution with antimicrobial properties. The stability of the suspensions obtained by an adapted co-precipitation method was evaluated by ultrasonic measurements. The size and size distribution of the particle populations were determined using scanning electron microscopy (SEM), and dynamic light scattering (DLS). Both methods of analysis showed a narrow distribution of particles. DLS gave a monomodal distribution with hydrodynamic diameters around 38 nm for ciprofloxacin embedded in silver doped hydroxyapatite (AgHA-C) and 45.7 nm for tetracycline embedded in silver doped hydroxyapatite (AgHA-T). The average diameters calculated from SEM were 17 nm for AgHA-C and 19 nm for AgHA-T. Both Ciprofloxacin and Tetracycline influenced the hydroxyapatite structure, which led to the appearance of new vibrational bands characteristic of the specific chemical composition in the FTIR spectrum. The antimicrobial properties of the AgHA-C and AgHA-T suspensions were assessed using the most common reference microbial strains Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, and Candida albicans ATCC 10231. The results of the in vitro antimicrobial assays determined that the AgHA-C and AgHA-T suspensions exhibited exceptional antimicrobial activity. Moreover, the data revealed that the antimicrobial activity increased with the increase of the incubation time.

Lately, there is a growing interest in organic photovoltaic (OPV) cells due to the organic materials' properties and compatibility with various types of substrates. However, their efficiencies are low relative to the silicon ones; therefore, other ways (i.e., electrode micron/nanostructuring, synthesis of new organic materials, use of additives) to improve their performances are still being sought. In this context, we studied the behavior of the common organic bulk heterojunction (P3HT:PC70BM) deposited by matrix-assisted pulsed laser evaporation (MAPLE) with/without 0.3% of 1,8-diiodooctane (DIO) additive on flat and micro-patterned ITO substrates. The obtained results showed that in the MAPLE process, a small quantity of additive can modify the morphology of the organic films and decrease their roughness. Besides the use of the additive, the micro-patterning of the electrode leads to a greater increase in the absorption of the studied photovoltaic structures. The inferred values of the filling factors for the measured cells in ambient conditions range from 19% for the photovoltaic structures with no additive and without substrate patterning to 27% for the counterpart structures with patterning and a small quantity of additive.

Proteins are vital components of living cells and the loss of their native functions has been associated with a wide variety of medical conditions. From this point of view, investigation of the protein microenvironment is crucial to support the development of therapeutic approaches capable of ensuring cellular functions. Therefore, analytical assays for the detection, quantification, and characterization of proteins, drugs, and protein-drug complexes play an essential role in fundamental research and clinical applications. Electrochemistry arises as an alternative methodology for fast assessment of proteins and drugs and is attractive due to the adaptability to miniaturization and scalability of electroanalytical devices, which then can be further employed as strategies towards personalized medical care. Thus, this review summarizes electrochemical investigations in the past 10 years on protein-based analytical devices and biosensors. A general overview of electrochemical assays that integrate proteins with nanostructured materials and conductive polymers is presented. Applications of electrochemical assays and biosensors were divided into four categories. First, those designed for drug screening strategies that focus on targeting specific intracellular, extracellular, or membrane protein subdomains to modulate their functions, aggregation/misfolding of proteins, and protein degradation pathways. Then, drug metabolism assays that involve mimicking natural metabolic pathways to identify potential safety and efficacy issues related to a drug or its metabolites. The third was dedicated to electrochemical drug delivery systems with anchored drugs in the form of bioconjugates, while the fourth was dedicated to electroanalytical methodologies for quantitative drug assays, where the electroactivity of the target species is often used to correlate the electrochemical signal to their concentration.

The purpose of the work is the synthesis and characterization of TiO2 nanoparticles. These were obtained by two different methods, precipitation and sol-gel, starting from titanium(IV) isopropoxide and calcining at 500 degrees C for 2 h. The compositional, structural, morphological and optical properties of the resulting powders were investigated by energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, reflectance spectroscopy and photoluminescence spectroscopy. The thermally treated samples contain TiO2 as single phase with tetragonal structure, known as anatase. SEM analysis showed quasi-spherical particles with a diameter of few nanometres for the calcined samples, while the optical studies revealed band gap values of 3.04 and 3.17 eV, as a function of the preparation route.

A numerical algorithm for interface analysis of wicking drops was developed. The code identifies the interface points and subsequently calculates the diameter, volume and contact angle of the drop. As the code can work with multiple frames, it can evaluate the evolution in time of these parameters and calculate the spreading velocity and the flow rate. The performance of the code was tested with solutions of poly(ethylene oxide) of 0.5% and 5% (w/v) concentration. The mean execution time was 0.5 seconds per frame. Therefore, the code can greatly improve the analysis of fluids wicking in porous media, where numerous frames are involved.

In this work, polyvinylidene fluoride (PVDF) fibres loaded with mineral powders, such as titanium dioxide (TiO2), barium titanate (BaTiO3), and calcium magnesium silicate (CaxMgSi2Oy), were prepared by electrospinning polymeric suspensions containing 20 wt.% PVDF and 3 wt.% powder. The piezoelectric polymer was combined with powders having antibacterial, piezoelectric, or bioactive properties, respectively, in the desire to obtain multifunctional materials compatible with the requirements of the medical field. All powders were characterized in terms of morphology and crystalline structure, which confirmed the nanometric character of TiO2 samples and micrometric one for the other two, as well as the lower crystallite size for TiO2 specimens as against BaTiO3 and CaxMgSi2Oy. The final fibrous scaffolds were homogeneous, composed of individual fibres with a diameter below 1 mu m and decorated with aggregates of inorganic particles, placed either inside the fibres or attached to their surface. The biological evaluation demonstrated the superiority of the composites towards the plain polymer in terms of cell viability.

In the present work, stannite Cu2CoSnS4 (CCTS) films were elaborated using spray pyrolysis method on soda-lime glass, at different deposition temperatures (T-d = 250, 300, and 350 degrees C), followed by different chosen sulfurization temperatures (T-s = 450, 500, and 550 degrees C). X-ray diffraction (XRD) revealed the nearly single-phase formation of CCTS films at 300 degrees C deposition temperature. After sulfurization in argon flow, the XRD lines become narrower, the average crystallite size expanding above 70 nm. The Raman spectroscopy analysis confirmed the stannite structure formation, as well as the presence CoS2 secondary phases, which reduces at higher sulfurization temperature (550 degrees C). The energy dispersive spectroscopy results indicated atomic ratios of Cu/Co/Sn/S close to the ideal stoichiometric ratio 2:1:1:4. The room temperature photoluminescence emission is recorded with maximum in the 1.35-1.40 eV range. Thermoelectric properties are measured up to 130 degrees C, the films show poor power factor as a result of small positive Seebeck coefficients 10-45 Of K -1 and low electrical conductivity despite of having relatively high carrier concentration (similar to 10(20) cm(-3)).