National Institute Of Materials Physics - Romania

Antiferroelectric random access memory (AFERAM) is one of the newest alternative non-volatile memory technologies to emerge in recent years. ZrO2-based antiferroelectric films are exceptionally well-suited for memory applications with very high cycling endurance (>10(10)) and low operating voltages (< 2 V). Lightly alloying ZrO2 with HfO2 is performed to assess AFERAM device performance with back-end-of-line compatible thin film Zr1-xHfxO2 (x <= 0.13) capacitors. The transition fields associated with antiferroelectric behavior are reduced with more Hf incorporation, yielding a larger magnitude switching polarization and memory window. Cycling endurance beyond 10(10) cycles is conducted on thin film capacitors where wake-up in AFERAM first leads to an increase, then a decrease in the memory window at a cumulative cycle number found to be dependent on the amount of Hf-incorporation. Hf-incorporation into ZrO2 is demonstrated to be a feasible way to improve the memory window in ZrO2-based AFERAM.

A deeper understanding of the coupling at the interface of multiferroics heterostructures is being achieved by the use of synchrotron radiation techniques. Here, the authors use k-resolved soft X-ray photoemission spectroscopy and first principles calculations to investigate the band structure of several multiferroic heterostructures, isolating the distinct signature of the interface. Physics of the multiferroic interfaces is currently understood mostly within a phenomenological framework based on screening of the polarization field and depolarizing charges. Additional effects still unexplored are the band dependence of the interfacial charge modulation and the associated changes of the electron-phonon interaction, coupling the charge and lattice degrees of freedom. Here, multiferroic heterostructures of the colossal-magnetoresistance manganite La1-xSrxMnO3 buried under ferroelectric BaTiO3 and PbZrxTi1-xO3 are investigated using soft-X-ray angle-resolved photoemission. The experimental band dispersions from the buried La1-xSrxMnO3 identify coexisting two-dimensional hole and three-dimensional electron charge carriers. The ferroelectric polarization modulates their charge density, affecting the coupling of the 2D holes and 3D electrons with the lattice which forms large Frohlich polarons inherently reducing mobility of the charge carriers. Our k-resolved results on the orbital occupancy, band filling and electron-lattice interaction in multiferroic oxide heterostructures modulated by the ferroelectric polarization disclose most fundamental physics of these systems needed for further progress of beyond-CMOS ferro-functional electronics.

Gallium telluride (GaTe) is a van der Waals semiconductor, currently adopted for photonic and optoelectronic devices. However, the rapid degradation of GaTe in air, promoted by Te vacancies, is detrimental for device applications. Here, it is demonstrate that the surface oxidation of GaTe can be unexpectedly exploited for expanding the breadth of applications of GaTe. Specifically, the formation of a nanoscale sub-stoichiometric wide-band-gap Ga2O3 skin, promoted by Te vacancies, over narrow-band-gap GaTex upon air exposure is beneficial for electrocatalysis, photocatalysis, and gas sensing . In particular, the Heyrovsky step (H-ads + H+ + e(-) -> H-2) of hydrogen evolution reaction in an acidic medium is barrier-free for the sub-stoichiometric gallium-oxide/gallium-telluride heterostructure, which also enables a significant reduction of costs with respect to state-of-the-art Pt/C electrodes. In the photocatalytic process, the photo-generated electrons migrate from GaTe to Ga2Ox skin, which acts as the chemically active side of the interface. Moreover, the Ga2O3/GaTe heterostructure is a suitable platform for sensing of H2O, NH3, and NO2 at operational temperatures extended up to 600 degrees C (useful for gas detection in combustion processes), mainly due to the increased area of charge redistribution after adsorption achieved upon oxidation of GaTe.

The paper presents fabrication and characterization of spark plasma sintered textured (001) MgB2 with a record degree of orientation of about 40% and 16% by high-energy ultra-sonication and slip casting in high magnetic field (12 T) and 0 T magnetic field, respectively. Structural characterization was performed by X-ray diffraction, and electron microscopy. The analysis revealed unexpected preferred orientation also in the MgO secondary phase due to the epitaxial growth of (111) MgO on (001) MgB2. The influence of oriented microstructure on the superconducting characteristics expressed by critical current density (Jc), irreversibility field ( H irr), and on the pinning properties were assessed. High anisotropy versus sample orientation in applied magnetic field, H , was observed for Jc, Hirr, pinning activation energy ( U *) extracted from relaxation measurements. The zero-field critical current, Jc0 and Fp,maxare weakly or not dependent on the direction of H , while the other indicated parameters are significantly influenced. Results enable control of superconducting parameters by further optimization of microstructure through MgB2 texturing as a novel and viable strategy for development of bulk MgB2 with enhanced properties when taking advantage of its anisotropy.(c) 2021 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University

Special attention has recently been paid to surface-defective titanium dioxide and black TiO2 with advanced optical, electrical, and photocatalytic properties. Synthesis of these materials for photodegradation and mineralization of persistent organic pollutants in water, especially under visible radiation, presents interest from scientific and application points of view. Chemical reduction by heating a TiO2 and NaBH4 mixture at 350 degrees C successfully introduced Ti3+ defects and oxygen vacancies at the surface of TiO2, with an increase in the photocatalytic degradation of amoxicillin-an antibiotic that is present in wastewater due to its intense use in human and animal medicine. Three TiO2 samples were prepared at different annealing temperatures to control the ratio between anatase and rutile and were subjected to chemical reduction. Electron paramagnetic resonance investigations showed that the formation of surface Ti3+ defects in a high concentration occurred mainly in the anatase sample annealed at 400 degrees C, contributing to the bandgap reduction from 3.32 eV to 2.92 eV. The reduced band gap enhances visible light absorption and the efficiency of photocatalysis. The nanoparticles of similar to 90 m(2)/g specific surface area and 12 nm average size exhibit similar to 100% efficiency in the degradation of amoxicillin under simulated solar irradiation compared with pristine TiO2. Mineralization of amoxicillin and by-products was over 75% after 48 h irradiation for the anatase sample, where the Ti3+ defects were present in a higher concentration at the catalyst's surface.

As ferroelectric Hf0.5Zr0.5O2 (HZO) thickness scales below 10 nm, the switching characteristics are severely distorted typically showing an antiferroelectric-like behavior (pinched hysteresis) with reduced remanent polarization. Using Landau-Ginsburg-Devonshire (LGD) theory for the analysis of the experimental results, it is shown here that, in thin (5 nm) HZO, depolarization fields drive the system in a stable paraelectric phase coexisting with a metastable ferroelectric one, which explains the pinched hysteresis. This state of matter resembles a first order ferroelectric above the Curie temperature which is known to result in similar double-loop behavior. Here, based on the analysis of experimental data in the framework of LGD theory, it is reported that charge injection and trapping at pre-existing interface defects during field cycling ("wake-up") screens the depolarization field stabilizing ferroelectricity. It is found in particular that a sufficiently large energy density of interface states is beneficial for the recovery of fully open ferroelectric loops. HfO2-based ferroelectric materials have immense technological potential and so significant attention has been given to improve the ferroelectric properties at low-thickness. Here, using Landau Devonshire theory, the authors show the origin of pinched hysteresis loops is connected with the existence of pronounced depolarizing fields which are minimized during field cycling recovering the full ferroelectric loops.

A new methodology to obtain magnetic information on magnetic nanoparticle (MNP) systems via electron tomography techniques is reported in this work. The new methodology is implemented in an under-development software package called Magn3t, written in Python and C++. A novel image-filtering technique that reduces the highly undesired diffraction effects in the tomography tiltseries has been also developed in order to increase the reliability of the correlations between morphology and magnetism. Using the Magn3t software, the magnetic shape anisotropy magnitude and direction of magnetite nanoparticles has been extracted for the first time directly from transmission electron tomography.

The ability of TiO2 to generate reactive oxygen species under UV radiation makes it an efficient candidate in antimicrobial studies. In this context, the preparation of TiO2 microparticles coated with Ca- and Cu-based composite layers over which Cu(II), Cu(I), and Cu(0) species were identified is presented here. The obtained materials were characterized by a wide range of analytical methods, such as X-ray diffraction, electron microscopy (TEM, SEM), X-ray photoelectron (XPS), and UV-VIS spectroscopy. The antimicrobial efficiency was evaluated using qualitative and quantitative standard methods and standard clinical microbial strains. A significant aspect of this composite is that the antimicrobial properties were evidenced both in the presence and absence of the light, as result of competition between photo and electrical effects. However, the antibacterial effect was similar in darkness and light for all samples. Because no photocatalytic properties were found in the absence of copper, the results sustain the antibacterial effect of the electric field (generated by the electrostatic potential of the composite layer) both under the dark and in light conditions. In this way, the composite layers supported on the TiO2 microparticles' surface can offer continuous antibacterial protection and do not require the presence of a permanent light source for activation. However, the antimicrobial effect in the dark is more significant and is considered to be the result of the electric field effect generated on the composite layer.

The hematite-based nanomaterials are involved in several catalytic organic and inorganic processes, including water decontamination from organic pollutants. In order to develop such species, a series of bimetallic hematite-based nanocomposites were obtained by some goethite composites-controlled calcination. Their composition consists of various phases such as alpha-FeOOH, alpha-Fe2O3 or gamma-Fe2O3 combined with amorphous (Mn2O3, Co3O4, NiO, ZnO) or crystalline (CuO) oxides of the second transition ion from the structure. The component dimensions, either in the 10-30 or in the 100-200 nm range, together with the quasi-spherical or nanorod-like shapes, were provided by Mossbauer spectroscopy and powder X-ray diffraction as well as transmission electron microscopy data. The textural characterization showed a decrease in the specific area of the hematite-based nanocomposites compared with corresponding goethites, with the pore volume ranging between 0.219 and 0.278 cm(3)g(-1). The best catalytic activity concerning indigo carmine removal from water in hydrogen peroxide presence was exhibited by a copper-containing hematite-based nanocomposite sample that reached a dye removal extent of over 99%, which correlates with both the base/acid site ratio and pore size. Moreover, Cu-hbnc preserves its catalytic activity even after four recyclings, when it still reached a dye removal extent higher than 90%.

In this study, three novel magnetic nanocomposites based on carboxyl-functionalized SBA-15 silica and magnetite nanoparticles were prepared through an effective and simple procedure and applied for methylene blue (MB) and malachite green G (MG) adsorption from single and binary solutions. Structure, composition, morphology, magnetic, and textural properties of the composites were thoroughly investigated. The influence of the amount of carboxyl functional groups on the physicochemical and adsorptive properties of the final materials was investigated. The capacity of the synthesized composites to adsorb MB and MG from single and binary solutions and the factors affecting the adsorption process, such as contact time, solution pH, and dye concentration, were assessed. Kinetic modelling showed that the dye adsorption mechanism followed the pseudo-second-order kinetic model, indicating that adsorption was a chemically controlled multilayer process. The adsorption rate was simultaneously controlled by external film diffusion and intraparticle diffusion. It was evidenced that the molecular geometry of the dye molecule plays a major role in the adsorption process, with the planar geometry of the MB molecule favoring adsorption. The analysis of equilibrium data revealed the best description of MB adsorption behavior by the Langmuir isotherm model, whereas the Freundlich model described better the MG adsorption.