National Institute Of Materials Physics - Romania

Undoped and Sm3+doped 45P2O5-45Na2O-2Al2O3-8BaO glasses were synthesized by the melt-quenching technique. The glass structure and luminescence properties were investigated by using Raman spectroscopy, scanning electron microscopy (SEM), spectroscopic ellipsometry, Judd-Ofelt theory and photoluminescence. Electron microscopy showed the homogeneity of samples. Raman spectroscopy revealed that the overall struc-ture of the glass was unaffected by the doping of Sm3+ and ellipsometry was used to measure the optical constants. Judd-Ofelt (JO) analysis was performed on the absorption bands of Sm3+ (4f5) and the three phenomenological parameters (omega 2, omega 4, and omega 6) were computed and then used to determine radiative properties such as the radiative transition probability (Ar), the fluorescent branching ratio (beta r), the stimulated emission cross-section (sigma e) and the radiative lifetime (tau rad). Photoluminescence (PL) spectrum showed the typical four transitions of Sm3+ at wavelengths of 564, 600, 645 and 703 nm corresponding to 4G5/2 -> 6H5/2, 6H7/2, 6H9/2 and 6H11/2, respectively. The spectroscopic quality factors omega 4/omega 6, the predicted lifetime (tau rad) calculated using the JO method and the experimentally lifetime (tau exp) for the 4G5/2level were calculated and discussed. The glass color purity is as high as 98%, which makes it a potential candidate for laser emission.

In the present study, we report the development and characterization of composite layers (by spin coating) based on magnesium-doped hydroxyapatite in a chitosan matrix, containing human osteosarcoma MG63 cells anchored. Studies regarding the biocompatibility of the composite layers were performed with the aid of a MTT (3-4,5-Dimethylthiazol 2,5-diphenyltetrazolium bromide) assay. The data determined that the composite layers did not inhibit the growth and adhesion of MG63 cells to their surfaces exhibiting good biocompatibility properties. Furthermore, the attachment and development of MG63 cells on the surface of MgHApCh composite layers were investigated using atomic force microscopy (AFM). AFM topographical maps emphasized that the HApCh and 8MgHApCh composite layers surface promoted the attachment and proliferation of MG63 cells on their surface. Meanwhile, in the case of 30MgHApCh layers incubated for 48 h, a slight modification of the morphological features of the MG63 cells. In addition, the effects of the composite layers against Candida albicans ATCC 10231 were also evaluated. The data results from the in vitro antifungal assay depicted that the composite layers successfully inhibited the growth of the fungal cells onto their surface. Morphological and fractal analyses unveil cancer cell surfaces on Mg-containing composite layers with intricate 3D patterns, driven by highfrequency components. Their remarkable complexity and roughness arises from a strong multifractal nature, supporting more effective vertical growth compared to Si and HApCh surfaces. The cell viability reduced of uncoated Si surface is highlighted by its less intense 3D pattern growth. Our results show that the uncoated Si surface promotes lower viability of MG63 cancer cells, with less rough and complex 3D spatial patterns.

In the present study, sage-coated zinc-doped hydroxyapatite was incorporated into a dextran matrix (7ZnHAp-SD), and its physico-chemical and antimicrobial activities were investigated. A 7ZnHAp-SD nanocomposite suspension was obtained using the co-precipitation method. The stability of the nanocomposite suspension was evaluated using ultrasound measurements. The stability parameter calculated relative to double-distilled water as a reference fluid highlights the very good stability of the 7ZnHAp-SD suspension. X-ray diffraction (XRD) experiments were performed to evaluate the characteristic diffraction peak of the hydroxyapatite phase. Valuable information regarding the morphology and chemical composition of 7ZnHAp-SD was obtained via scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) studies. Fourier-transform infrared spectroscopy (FTIR) measurements were performed on the 7ZnHAp-SD suspensions in order to evaluate the functional groups present in the sample. Preliminary studies on the antimicrobial activity of 7ZnHAp-SD suspensions against the standard strains of Staphylococcus aureus 25923 ATCC, Enterococcus faecalis 29212 ATCC, Escherichia coli 25922 ATCC, and Pseudomonas aeruginosa 27853 ATCC were conducted. More than that, preliminary studies on the biocompatibility of 7ZnHAp-SD were conducted using human cervical adenocarcinoma (HeLa) cells, and their results emphasized that the 7ZnHAp-SD sample did not exhibit a toxic effect and did not induce any noticeable changes in the morphological characteristics of HeLa cells. These preliminary results showed that these nanoparticles could be possible candidates for biomedical/antimicrobial applications.

High density samples (92-94.5 %) of MgB2 were prepared by Spark Plasma Sintering (SPS). The on-off pulsed current patterns of SPS processing were 8-4, 12-2, 24-2, 99-1. Patterns with more on pulses favor formation of a higher amount of the secondary MgB4 phase through the decomposition of MgB2. They also promote enhancement of larger MgO crystallites without a strong increase in the amount of this phase. Densification rate and pressure in the SPS chamber show a similar behavior, but their amplitude varies and the temperatures defining different stages present some shifts. As-revealed differences induced by pulsed patterns impact superconducting properties in a complex manner. An attempt to assess correlations between the pattern and different superconducting parameters is presented.

Among various "families" of iron-based superconductors, the quite recently discovered AeAFe(4)As(4) (where Ae is an alkali-earth metal and A is an alkali metal) has high critical current density, a very high upper critical field, and a low anisotropy, and has recently received much interest for the possibility of high magnetic field applications at the liquid hydrogen temperature. We have performed DC magnetization relaxation and frequency-dependent AC susceptibility measurements on high-quality single crystals of CaKFe4As4 with the aim of determining the pinning potential U*. The temperature dependence of U* displays a clear crossover between elastic creep and plastic creep. At temperatures around 27-28 K, U* has a very high value, up to 1200 K, resulting in an infinitesimally small probability of thermally activated flux jumps. From the dependence of the normalized pinning potential on irreversible magnetization, we have determined the creep exponents in the two creep regimes, which are in complete agreement with theoretical models. The estimation of the pinning potential from multifrequency AC susceptibility measurements was possible only near the critical temperature due to equipment limitations, and the resulting value is very close to the one that resulted from the magnetization relaxation data. Magnetic hysteresis loops revealed a second magnetization peak and very high values of the critical current density.

Flexible porous materials have gained a high interest due to their impact on the development of electrochemical point-ofcare devices for monitoring the state of health of individuals. Among the porous materials, paper and textiles are most commonly used due to their innate capillary action on fluids. In this article, attention is paid to the retention of analytes in paper and textile porous substrates, and possible procedures to overcome this effect are discussed. The patterning of hydrophilic and hydrophobic regions for sample flow manipulation, and the folding properties of the flexible substrates for 3D architectures capable of transfer of analytes, are considered in relation to current electrode materials and detection methodologies.

Technological progress has led to the development of analytical tools that promise a huge socio-economic impact on our daily lives and an improved quality of life for all. The use of plant extract synthesized nanoparticles in the development and fabrication of optical or electrochemical (bio)sensors presents major advantages. Besides their low-cost fabrication and scalability, these nanoparticles may have a dual role, serving as a transducer component and as a recognition element, the latter requiring their functionalization with specific components. Different approaches, such as surface modification techniques to facilitate precise biomolecule attachment, thereby augmenting recognition capabilities, or fine tuning functional groups on nanoparticle surfaces are preferred for ensuring stable biomolecule conjugation while preserving bioactivity. Size optimization, maximizing surface area, and tailored nanoparticle shapes increase the potential for robust interactions and enhance the transduction. This article specifically aims to illustrate the adaptability and effectiveness of these biosensing platforms in identifying precise biological targets along with their far-reaching implications across various domains, spanning healthcare diagnostics, environmental monitoring, and diverse bioanalytical fields. By exploring these applications, the article highlights the significance of prioritizing the use of natural resources for nanoparticle synthesis. This emphasis aligns with the worldwide goal of envisioning sustainable and customized biosensing solutions, emphasizing heightened sensitivity and selectivity.

This study aimed to exploit two invasive plant species to develop a novel, multifunctional, bioactive wound dressing based on a microporous cellulosic sponge (CS) from Gleditsia triacanthos pods and functionalizing them with Phytolacca americana fruit extract. The CS was functionalized, lyophilized, and characterized by Attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, contact angle, water absorption, and retention capacity. In addition, two parameters were evaluated in temporal dynamics: controlled release of phenolic compounds and antioxidant activities. The hemolytic index, blood clotting kinetics, lactate dehydrogenase release, and wound scratch assays proved their hemo- and bio-compatibility, as well as their ability to promote cell proliferation and migration promoting-activity and to inhibit microbial growth. Furthermore, the obtained spongious material exhibited an anti-inflammatory effect by modulating the macrophages' secretion profile of IL-6 and IL-10. In conclusion, the microporous cellulosic sponge obtained from G. triacanthos could be used as a vehicle to ensure the controlled release of bioactive principles with pro-wound healing activities extracted from invasive plants. [GRAPHICS] .

A magnesium-doped hydroxyapatite in chitosan matrix (MgHApC) sample was developed as a potential platform for numerous applications in the pharmaceutical, medical, and food industries. Magnesium-doped hydroxyapatite suspensions in the chitosan matrix were obtained by the coprecipitation technique. The surface shape and morphological features were determined by scanning electron microscopy (SEM). The hydrodynamic diameter of the suspended particles was determined by Dynamic light scattering (DLS) measurements. The stability of MgHApC suspensions was evaluated by ultrasonic measurements. The hydrodynamic diameter of the MgHApC particles in suspension was 29.5 nm. The diameter of MgHApC particles calculated from SEM was 12.5 +/- 2 nm. Following the SEM observations, it was seen that the MgHApC particles have a spherical shape. The Fourier-transform infrared spectroscopy (FTIR) studies conducted on MgHApC proved the presence of chitosan and hydroxyapatite in the studied specimens. In vitro antimicrobial assays were performed on Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231 microbial strains. The antimicrobial experiments showed that MgHApC exhibited very good antimicrobial properties against all the tested microorganisms. More than that, the results of the in vitro studies revealed that the antimicrobial properties of the samples depend on the incubation time. The evaluation of the sample's cytotoxicity was performed using the human colon cancer (HCT-8) cell line. Our results suggested the great potential of MgHApC to be used in future applications in the field of biomedical applications (e.g., dentistry, orthopedics, etc.).

Herewith, we investigated the capacitive properties of hybrid nanometric architectures consisting of tungsten oxide nanoparticles deposited on graphite (WOx/G) and graphite coated with highly-porous carbon nanowall layers (WOx/CNW/G). The deposition of the nanostructured oxide was performed by a plasma-assisted sublimation, vapor transport and condensation technique. The samples containing the CNW interlayer show superior areal capacitances making this architecture and its fabrication route promising approaches for supercapacitor applications. Thus, areal capacitances of WOx/CNW/G and WOx/G, estimated from galvanostatic chargedischarge tests (GCD) at an applied density current of 1 mA cm-2, are 1247.2 mF cm-2 and 527.3 mF cm-2, respectively. From SEM and XPS investigations, it was observed that CNW promotes the formation of a high amount of small tungsten oxide particles, homogeneously distributed on electrode surface, and facilitates the formation of highly conductive tungsten nitride species, resulting in electrodes with remarkable charge-storage capacity.