National Institute Of Materials Physics - Romania

Exchange coupling in a SrFe12O19 - Fe3O4 nanocomposite magnet was explored in this study. The composition, microstructure, local structure and magnetic properties were investigated by XRD, SEM, Mossbauer spectroscopy, and SQUID magnetometry. The magnetoplumbite SrFe12O19 and spinel Fe3O4 structures were verified by X-ray diffraction. The morphology of the composite reveals the characteristics of the two components. The hyperfine parameters allowed the identification of the Wyckoff positions of the iron ions corresponding to the involved phases. The magnetic measurements of the composite, showing a single-phase-like magnetic hysteresis loop, confirmed the exchange coupling between the hard and soft magnetic phases.

Six compounds of the types [M(dmbg)(2)]center dot nH(2)O ((1) M: Ni, n = 0; (4) M: Cu, n = 1; Hdmbg: N,N '-dimethylbiguanide) and, respectively, [ML]center dot nH(2)O (where (2) M: Ni, L: L-1, n = 0; (3) M: Ni, L: L-2, n = 0; (5) M: Cu, L: L-1, n = 0 and (6) M: Cu, L: L-2, n = 3, H2L1: ligand resulted from the condensation of (1) with ammonia and formaldehyde and H2L2: ligand resulted from the condensation of (4) with hydrazine and formaldehyde) were characterized as mononuclear species through information provided by NMR, electronic paramagnetic resonance (EPR) and UV-Vis spectroscopy as well as cyclic voltammetry. All data are consistent with macrocyclic formation by condensation. The complexes adopt a distorted square planar geometry resulting from the chelating behaviour of the corresponding ligands. The EPR spectra recorded after the addition of Cu(II) complexes into the corresponding Ni(II) complexes show a well resolved hyperfine structure with the superhyperfine pattern corresponding to four nitrogen atom donors. The cathodically shift of E-pc2 for both series can be correlated with the increased stability of the M(I) species through macrocyclic ligands. Geometry optimization studies for complexes (2), (3), (5) and (6) have further confirmed the experimental data. The pharmacokinetic computational results indicate that the complexes exhibit medium to low intestinal absorption and slow blood-brain barrier permeability but low toxicity. Their predictive pharmacodynamic profiles show that the compounds present the ability to inhibit protease activity. By corroborating the results of the in silico analysis with the experimental ones, the most promising complexes for antimicrobial applications are (1) and (2) and, respectively, (4) and (6) for the development of novel antitumour strategies.

Resveratrol (RES) is a naturally occurring product with numerous biological activities. Despite its potential benefits, its use is limited due to its low aqueous stability and solubility in its native form. The porous sol-gel silica materials which are able to entrap different organic molecules represent new studied release carriers. The aim of this work was to generate a solid matrix to encapsulate RES ensuring protection, increased solubility and release in solutions. A non-toxic ingredient, namely beta-cyclodextrin (beta-CD), able to form inclusion complexes (ICs) with RES has been used. Ecological formulations have been processed by entrapping the RES containing ICs in silica matrices obtained from a silica colloidal sol by the aqueous route of the sol-gel method. Characterization methods (DSC, FTIR, UV-Vis, fluorescence studies, SEM) have evidenced the presence of RES-beta-CD inclusion complex in the silica powder, RES stability in the matrix and its release in aqueous and organic solutions, and the morphology of the carrier. An evaluation of the antioxidant activity of RES in the present formulation was performed by the chemiluminescence assay and RES release profile in aqueous solutions was obtained by HPLC-MS. The resulted materials can find applications in different domains. Graphic abstract

Thin film metal-ferroelectric-metal capacitors with an equal mixture of hafnium oxide and zirconium oxide as the ferroelectric material are fabricated using iridium oxide as the electrode material. The influence of the oxygen concentration in the electrodes during crystallization anneal on the ferroelectric properties is characterized by electrical, chemical, and structural methods. Forming gas, O-2, and N-2 annealing atmospheres significantly change the ferroelectric performance. The use of oxygen-deficient electrodes improves the stabilization of the ferroelectric orthorhombic phase and reduces the wake-up effect. It is found that oxygen-rich electrodes supply oxygen during anneal and reduce the amount of oxygen vacancies, but the nonferroelectric monoclinic phase is stabilized with a negative impact on the ferroelectric properties.

TiO2-C (carbon) hybrid materials are promising electrocatalyst supports because the presence of TiO2 results in enhanced stability. Use of new types of carbonaceous materials such as reduced graphene oxide instead of traditional active carbon provides certain benefits. Although the rutile polymorph of TiO2 seems to have the most beneficial properties in these hybrid materials, the anatase type is more frequent in TiO2-rGO composites, especially in graphite oxide (GO) derived ones, as GO has several properties which may interfere with rutile formation. To explore and evaluate these peculiarities and their influence on the composite formation, we compared TiO2-C systems formulated with GO and Black Pearls (BP) carbon. Various physicochemical methods, such as attenuated total reflection infrared (ATR-IR)-, solid state NMR-, Raman- and X-ray photoelectron spectroscopy, X-ray powder diffraction (XRD), electron microscopy, etc. were used to characterize the samples from the different stages of our multistep sol-gel synthesis. Our experiments demonstrated that utilization of GO is indeed feasible for composite preparation, although its sodium contamination has to be removed during the synthesis. On the other hand, high temperature treatment and/or solvothermal treatment during composite synthesis resulted in decomposition of the functional groups of the GO and the functional properties of the final product were similar in case of both composites. However, Pt/TiO2-GO derived sample showed higher oxygen reduction reaction activity than Pt/TiO2-BP derived one. Based on the decrease of electrochemical surface area, the stability order was the following: Pt/C (commercial) < Pt/TiO2-BP derived C < Pt/TiO2-GO derived C.