National Institute Of Materials Physics - Romania

Capitalizing on invasive plant species and stopping their aggressive spread might be achieved by using them as a renewable source of useful products such as cellulose. The study aimed to develop new cellulose-based food packaging materials with antioxidant and antimicrobial activity. The cellulose was extracted from the invasive plant species Robinia pseudoacacia pods, crosslinked with citric acid, used as reinforcement for polyvinyl alcohol (PVA) and functionalized with ferulic acid (FA). The obtained materials were characterized by XRD, ATR-FTIR, contact angle and SEM. The materials exhibited low solubility in water and the swelling degree was proportional to the FA content. The FA release from the matrix was assessed by HPLC and the antioxidant profile by CUPRAC, FRAP, and TEAC methods. The obtained materials inhibited the growth of bacteria, yeasts and molds, being especially active on Gram-positive bacteria and yeasts. Overall, the most promising formulation for further developing new packaging materials for products with water activity less than 0.95 was the one with the highest FA content.

Kynurenic acid (KA) is an active metabolite of tryptophan with notable biological effects, such as antioxidant, neuroprotective, and anti-inflammatory properties. It often undergoes changes of the concentration in biological fluids in chronic diseases. Thus, detecting KA is of great importance for diagnosing inflammatory and neurodegenerative conditions, monitoring disease progression, and assessing responses to pharmacological treatment. This study aimed to design a tailored, flexible platform for sensitive and direct electrochemical detection of KA in biological fluids. Carbon-based electrodes were custom-printed in the lab using specialized inks and flexible substrates. The working electrodes were further functionalized with graphene oxide and subsequently electrochemically reduced to increase the sensitivity toward the analyte. An optimized differential pulse voltammetry protocol was developed for KA detection. The elaborated platform was firstly characterized and then evaluated regarding the analytical performances. It showed a good limit of detection (3 nM and demonstrated the capability to detect KA across a broad concentration range (0.01-500 mu M). Finally, the elaborated flexible platform, was succesfully applied for KA determination in serum and saliva samples, in comparison with an optimized HPLC-UV method. The developed platform is the first example of in-lab printed flexible platform reported in literature so far for KA detection. It is also the first study reported in the literature of detection of KA in raw saliva collected from 10 subjects. The sensitivity towards the target analyte, coupled with the adaptability and portability, showcases the potential of this platform for thus illustrating great potential for further development of wearable sensors and biomedical applications.

In the current study, a porous composite material, hydroxyapatite/chitosan/microcrystalline-cellulose (CaHAp-CS-MCC), was successfully prepared and used for the adsorption of Eriochrome Black T (EBT) from water. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential thermal analysis (DTA), thermogravimetric analysis (TGA), specific surface area (SSA), and atomic force microscope (AFM) were used to evaluate the physicochemical properties of the prepared adsorbents. CaHAp-CS-MCC exhibited a decrease in crystallinity and reduction in crystallite size. CaHAp-CS-MCC surface exhibited cracks and pores. AFM displayed changes in surface micro-texture of CaHAp, formation of new surface structures, and variations in particle size and distribution. Upon grafting CaHAp with CS and MCC, its specific surface area decreased from 139.224 to 11.775 m2/g. BET suggested that filling CaHAp pores by CS and MCC contributed to the reduction in surface area. The pore volume values decreased from 2.56 x 10-1 (CaHAp) to 3.91 x 10-2 cm3/g (CaHAp-CS-MCC). Adsorption equilibrium was reached at about 40 min. The adsorption capacities values of CaHAp-CS-MCC and CaHAp were equal to 248 mg/g and 92 mg/g, respectively. The pseudo-second order and the Langmuir equations fitted well the adsorption phenomenon. The calculated thermodynamic parameters showed an exothermic and non-spontaneous system.

Among many iron-based superconductors, isovalently substituted BaFe2(As1-xPx)2 displays, for x approximate to 0.3, apart from the quite usual Second Magnetization Peak (SMP) in the field dependence of the critical current density, an unusual peak effect in the temperature dependence of the critical current density in the constant field, which is related to the rhombic-to-square (RST) structural transition of the Bragg vortex glass (BVG). By using multi-harmonic AC susceptibility investigations in three different cooling regimes-field cooling, zero-field cooling, and field cooling with measurements during warming up-we have discovered the existence of a temperature region in which there is a pronounced magnetic memory effect, which we attributed to the direction of the structural transition. The observed huge differences in the third harmonic susceptibility at low and high AC frequencies indicates the difference in the time-scale of the structural transition in comparison with the timescale of the vortex excitations. Our findings show that the RST influence on the vortex dynamics goes beyond the previously observed influence on the onset of the SMP.

In the present work, we report the synthesis and investigations of La0.9K0.1MnO3 and La0.8K0.1Pb0.1MnO3 bulk samples which could be potential magnetocaloric materials for magnetic refrigeration close to room temperature. A flash combustion reaction and sintering at 1200 degrees C for 10 h are used to prepare the bulk materials. Both compounds crystallized into a rhombohedral structure with R3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\overline{3 }$$\end{document}c space group confirmed by X-ray powder diffraction results. Scanning electron microscopy analysis, combined with XRD peak profiles is performed to estimate the particle/crystallite size of the samples. Moreover, the Curie temperature, TC, is found to be higher in lead-rich sample due to the enhancement of the grain size and the Mn3+-O-Mn4+ double exchange (DE) interaction. Therefore, the bulk sample La0.8K0.1Pb0.1MnO3 shows a room temperature phase transition of 289 K as well as a higher saturation magnetization. The La0.8K0.1Pb0.1MnO3 bulk compound exhibits a high and sharp peak in magnetic entropy change up to 5.5 Jkg-1 K-1 under 5 T at the magnetic transition temperature TC. To compare the magnetocaloric performances of the studied compounds, relative cooling power (RCP) was employed. The obtained experimental results revealed that the increase in particle size influences severely the magnetocaloric properties.

Nowadays, the development of devices based on organic materials is an interesting research challenge. The performance of such devices is strongly influenced by material selection, material properties, design, and the manufacturing process. Usually, buckminsterfullerene (C60) is employed as electron transport material in organic photovoltaic (OPV) devices due to its high mobility. However, considering its low solubility, there have been many attempts to replace it with more soluble non-fullerene compounds. In this study, bulk heterojunction thin films with various compositions of zinc phthalocyanine (ZnPc), a perylene diimide derivative, or C60 were prepared by matrix-assisted pulsed laser evaporation (MAPLE) technique to assess the influence of C60 replacement on fabricated heterostructure properties. The investigations revealed that the optical features and the electrical parameters of the organic heterostructures based on this perylene diimide derivative used as an organic acceptor were improved. An increase in the JSC value (4.3 x 10-4 A/cm2) was obtained for the structures where the perylene diimide derivative acceptor entirely replaced C60 compared to the JSC value (7.5 x 10-8 A/cm2) for the heterostructure fabricated only with fullerene. These results are encouraging, demonstrating the potential of non-fullerene compounds as electron transport material in OPV devices.

Background/Objectives: A biocomposite based on magnesium-doped hydroxyapatite and enriched with amoxicillin (MgHApOx) was synthesized using the coprecipitation method and is presented here for the first time. Methods: The stability of MgHAp and MgHApOx suspensions was evaluated by ultrasound measurements. The structure of the synthesized MgHAp and MgHApOx was examined with X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The crystalline structure was determined by X-ray diffraction. The FTIR data were collected in the range of 4000-400 cm-1. The morphology of the nanoparticles was evaluated by scanning electron microscopy (SEM). Furthermore, the biocompatible properties of MgHAp, MgHApOx and amoxicillin (Ox) suspensions were assessed using human fetal osteoblastic cells (hFOB 1.19 cell line). The antimicrobial properties of the MgHAp, MgHApOx and Ox suspension nanoparticles were assessed using the standard reference microbial strains Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922 and Candida albicans ATCC 10231. Results: X-ray studies have shown that the biocomposite retains the characteristics of HAp and amoxicillin. The SEM assessment exhibited that the apatite contains particles at nanometric scale with acicular flakes morphology. The XRD and SEM results exhibited crystalline nanoparticles. The average crystallite size calculated from XRD analysis increased from 15.31 nm for MgHAp to 17.79 nm in the case of the MgHApOx sample. The energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) analysis highlighted the presence of the constituent elements of MgHAp and amoxicillin. Moreover, XPS confirmed the substitution of Ca2+ ions with Mg2+ and the presence of amoxicillin constituents in the MgHAp lattice. The results of the in vitro antimicrobial assay demonstrated that MgHAp, MgHApOx and Ox suspensions exhibited good antimicrobial activity against the tested microbial strains. The results showed that the antimicrobial activity of the samples was influenced by the presence of the antibiotic and also by the incubation time. Conclusions: The findings from the biological assays indicate that MgHAp and MgHApOx are promising candidates for the development of new biocompatible and antimicrobial agents for biomedical applications.

The development of thin films of chromium-doped hydroxyapatite (20CrHAp) deposited on silicon substrate by the spin coating method was realized for the first time. A coherent investigation of the physicochemical properties of 20CrHAp thin films was also carried out for the first time. The obtained thin films were studied by various techniques such as, scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR) investigations and fractal analysis. By scanning electron microscopy (SEM) studies were obtained valuable information about the surface morphology of the 20CrHAp thin films. The zeta potential (ZP), Dynamic light scattering (DLS) and ultrasound measurements (US) were used in order to evaluate the stability of 20CrHAp suspension. The ratio between the hydrodynamic diameter obtained by DLS and the particle diameter obtained by SEM was 1.6. The SEM results on 20CrHAp thin films suggested that the sample possess a conglomerate of nanoparticles unevenly distributed on their surface. The surface morphology of the 20CrHAp thin films was studied with the aid of atomic force microscopy (AFM). The AFM topography of the 20CrHAp thin film's surface highlighted that the thin films present the morphology of a continuum deposited layer composed of non-uniform particle conglomerates. The presence of hydroxyapatite on the surface of silicium effects on the development of the fungal cells on their surface. Furthermore, our investigation delves into the

Recently, much research has focused on the search for new mixed donor-acceptor layers for applications in organic electronics. Organic heterostructures with layers based on the generation 1 poly(propylene thiophenoimine) (G1PPT) dendrimer, N,N '-diisopropylnaphthalene diimide (MNDI), and a combination of the two were prepared and their electrical properties were investigated. Single layers of G1PPT and MNDI and a mixed layer (G1PPT:MNDI) were obtained via spin coating on quartz glass, silicon, and glass/ITO substrates, using chloroform as a solvent. The absorption mechanism was investigated, the degree of disorder was estimated, and the emission properties of the layers were highlighted using spectroscopic methods (UV-Vis transmission and photoluminescence). The effects of the concentration and surface topographical particularities on the properties of the layers were analyzed via atomic force microscopy. All of the heterostructures realized with ITO and Au electrodes showed good conduction, with currents of the order of mA. Additionally, the heterostructure with a mixed layer exhibited asymmetry in the current-voltage curve between forward and reverse polarization in the lower range of the applied voltages, which was more significant at increased concentrations and could be correlated with rectifier diode behavior. Consequently, the mixed-layer generation 1 poly(propylene thiophenoimine) dendrimer with N,N '-diisopropylnaphthalene diimide can be considered promising for electronic applications.

The silver/magnesium doped hydroxyapatite (AgMgHAp, Ca10_ x-yAgxMgy(PO4)6(OH)2, xAg=0.05 and yMg=0.02) nanocomposites coatings were deposited on Si substrate using the dip coating technique. The resulting coatings were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR-ATR) spectroscopy, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The EDS analysis highlighted the presence of the constitutive elements of the silver/magnesium doped hydroxyapatite (AgMgHAp) nanocomposites coatings. The surface microtexture of the AgMgHAp was assessed by atomic force microscopy (AFM) technique. The AFM data suggested the obtaining of a uniform deposited layer comprised of equally distributed nanoconglomerates. FT -IR studies highlighted the presence of vibrational modes associated with the phosphate and hydroxyl groups. No bands associated with silver or magnesium were observed. The XPS analysis highlighted the presence of the constituent elements of hydroxyapatite (Ca 2p, P 2 s, O 1 s), as well as dopants (Ag 3d, Mg 1 s and Mg 2p). The antifungal evaluation of AgMgHAp coatings was carried out using the Candida albicans ATCC 10231 fungal strain. The results of the antifungal assay revealed that the AgMgHAp coatings exhibited a strong inhibitory antifungal activity. Furthermore, the data highlighted that the AgMgHAp inhibited the development of biofilm on their surface. The results revealed that the antifungal activity of the coating varied based on the duration of incubation. On the other hand, the data also showed that AgMgHAp nanocomposites coatings inhibited the fungal cell adhesion and development from the early stages of the incubation. In addition to morphological analysis, we additionally take advantage of AFM images to investigate and explore the domain of fractal and multifractal analysis applied to the films under evaluation. Our studies indicates that nanocomposite coatings made from AgMgHAp demonstrate strong antifungal properties. Our studies indicates that nanocomposite coatings made from AgMgHAp demonstrate strong antifungal properties. These results suggest the potential of AgMgHAp nanocomposite coatings as a promising solution for developing innovative antifungal devices in biomedical applications.