National Institute Of Materials Physics - Romania

Fibres of poly(methyl methacrylate) were obtained by electrospinning, subjected to coating with a gold layer and then attached on a thin polyethylene terephthalate substrate in order to obtain flexible electrodes for biosensing applications. The morphology of these electrodes, investigated by scanning electron microscopy showed multilayers of random oriented fibres of approx. 400 nm diameter. The electrochemical characterization of these flexible electrodes was performed by cyclic voltammetry and electrochemical impedance spectroscopy in acid and neutral media, in the absence and in the presence of redox probes, proving their superior performance (e.g. 5fold current density value) when compared to planar gold electrodes obtained on silicon wafers. The electrodes obtained from conductive electrospun polymeric fibres nets were tested by cyclic voltammetry and amperometry for the detection of hydrogen peroxide with a sensitivity of 0.84 mA cm-2 mM-1 and a detection limit of 20.40 ?M. The immobilization of the model enzyme glucose oxidase at the surface of the gold-coated electrospun polymeric fibres electrode was investigated and the obtained biosensor was applied for glucose determination in aqueous solutions by fixed potential amperometry with a sensitivity of 3.10 ?A cm-2 mM-1, a detection limit of 0.33 mM, and reduced interferences. Also, the practical applicability of the biosensor was tested for the detection of glucose in artificial sweat and serum samples.

Peppers are consumed all over the world, have several benefits to human health, such as antioxidant properties that can prevent diseases related to free radicals such as cardiovascular, inflammatory diseases, cancer, among others. This work aimed to evaluate the antioxidant capacity (AOC) of 36 varieties of peppers through ABTS and DPPH radical scavenging, electroanalytical assays, and to verify the vasorelaxant properties of selected samples. The greater the amount of capsaicin found in the extracts, the higher the AOC the greater the vasorelaxation. Naga had the highest scoring for antioxidant capacity, pout showed the lowest antioxidant capacity, vase pyramid intermediate level, whereas the capsaicin content followed the same trend. Extracts from all pepper varieties studied presented vasorelaxant properties in independent and dependent endothelial pathways.

The 20S proteasome enzyme complex is involved in the proteolytic degradation of misfolded and oxidatively damaged proteins and is a focus of medical research for the development of compounds with pharmaceutical properties, which are active in cancer cells and/or neurodegenerative diseases. The present study aims to develop a biosensor for investigating the 20S proteasome activity and inhibition by means of electrochemical methods. The 20S proteasome is best immobilized at the electrode surface through bio-affinity interactions with antibodies that target different subunits on the 20S proteasome, enabling the investigation of the effect of an enzyme's orientation on biosensor response. The enzymatic activity is analyzed by fixed potential amperometry with the highest sensitivity of 24 mu A cm(-2) mM(-1) and a LOD of 0.4 mu M. The detection principle involves the oxidation of an electroactive probe that is released from the enzyme's substrates upon proteolysis. The most sensitive biosensor is then used to study the multicatalytic activity of the 20S proteasome, i.e. the caspase-, trypsin- and chymotrypsin-like activity, by analyzing the biosensor's sensitivity towards different substrates. The behavior of the immobilized 20S proteasome is investigated as a function of substrate concentration. The kinetic parameters are derived and compared with those obtained when the enzyme was free in solution, with K-0.5 values being one to two orders of magnitude lower in the present case. Two 20S inhibitors, epoxomicin and bortezomib, are investigated by analyzing their influence on the 20S biosensor response. The proposed analytical method for proteasome activity and inhibitor screening has the main advantage of being cost-effective compared to the ones typically employed.

The 20S proteasome enzyme complex is involved in the proteolytic degradation of misfolded and oxidatively damaged proteins and is a focus of medical research for the development of compounds with pharmaceutical properties, which are active in cancer cells and/or neurodegenerative diseases. The present study aims to develop a biosensor for investigating the 20S proteasome activity and inhibition by means of electrochemical methods. The 20S proteasome is best immobilized at the electrode surface through bio-affinity interactions with antibodies that target different subunits on the 20S proteasome, enabling the investigation of the effect of an enzyme's orientation on biosensor response. The enzymatic activity is analyzed by fixed potential amperometry with the highest sensitivity of 24 mu A cm(-2) mM(-1) and a LOD of 0.4 mu M. The detection principle involves the oxidation of an electroactive probe that is released from the enzyme's substrates upon proteolysis. The most sensitive biosensor is then used to study the multicatalytic activity of the 20S proteasome, i.e. the caspase-, trypsin- and chymotrypsin-like activity, by analyzing the biosensor's sensitivity towards different substrates. The behavior of the immobilized 20S proteasome is investigated as a function of substrate concentration. The kinetic parameters are derived and compared with those obtained when the enzyme was free in solution, with K-0.5 values being one to two orders of magnitude lower in the present case. Two 20S inhibitors, epoxomicin and bortezomib, are investigated by analyzing their influence on the 20S biosensor response. The proposed analytical method for proteasome activity and inhibitor screening has the main advantage of being cost-effective compared to the ones typically employed.

Three commercial powders of MgB2 were tested in vitro by MTS and LDH cytotoxicity tests on the HS27 dermal cell line. Depending on powders, the toxicity concentrations were established in the range of 8.3-33.2 mu g/ml. The powder with the lowest toxicity limit was embedded into polyvinylpyrrolidone (PVP), a biocompatible and biodegradable polymer, for two different concentrations. The self-replenishing MgB2-PVP composite materials were coated on substrate materials (plastic foil of the reservoir and silicon tubes) composing a commercial urinary catheter. The influence of the PVP-reference and MgB2-PVP novel coatings on the bacterial growth of Staphylococcus aureus ATCC 25923, Enterococcus faecium DMS 13590, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, in planktonic and biofilm state was assessed in vitro at 6, 24, and 48 h of incubation time. The MgB2-PVP coatings are efficient both against planktonic microbes and microbial biofilms. Results open promising applications for the use of MgB2 in the design of anti-infective strategies for different biomedical devices and systems.

In the present study, a new low-cost bioceramic nanocomposite based on porous hydroxyapatite (HAp) and cetyl trimethyl ammonium bromide (CTAB) as surfactant was successfully obtained by a simple chemical co-precipitation. The composition and structure of the HAp-CTAB were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) spectrometer, and N-2 adsorption/desorption analysis. The capacity of HAp-CTAB nanocomposites to remove the lead ions from aqueous solutions was studied by adsorption batch experiments and proved by Langmuir and Freundlich models. The Pb2+ removal efficiency of HAp-CTAB biocomposite was also confirmed by non-destructive ultrasound studies. The cytotoxicity assays showed that the HAp-CTAB nanocomposites did not induce any significant morphological changes of HeLa cells after 24 h of incubation or other toxic effects. Taken together, our results suggests that the obtained porous HAp-CTAB powder could be used for the decontamination of water polluted with heavy metals, such as Pb2+.

Web-like architectures of ZnO and TiO2 nanotubes were fabricated based on a three-step process of templating polymer nanofibers produced by electrospinning (step 1). The electrospun polymer nanofibers were covered by radio-frequency magnetron sputtering with thin layers of semiconducting materials (step 2), with FESEM observations proving uniform deposits over their entire surface. ZnO or TiO2 nanotubes were obtained by subsequent calcination (step 3). XRD measurements proved that the nanotubes were of a single crystalline phase (wurtzite for ZnO and anatase for TiO2) and that no other crystalline phases appeared. No other elements were present in the composition of the nanotubes, confirmed by EDX measurements. Reflectance spectra and Tauc plots of Kubelka-Munk functions revealed that the band gaps of the nanotubes were lower than those of the bulk materials (3.05 eV for ZnO and 3.16 eV for TiO2). Photocatalytic performances for the degradation of Rhodamine B showed a large degradation efficiency, even for small quantities of nanotubes (0.5 mg/10 mL dye solution): similar to 55% for ZnO, and similar to 95% for TiO2.

Continuing growth in global energy consumption and the growing concerns regarding climate change and environmental pollution are the strongest drivers of renewable energy deployment. Solar energy is the most abundant and cleanest renewable energy source available. Nowadays, photovoltaic technologies can be regarded as viable pathways to provide sustainable energy generation, the achievement attained in designing nanomaterials with tunable properties and the progress made in the production processes having a major impact in their development. Solar cells involving hybrid nanocomposite layers have, lately, received extensive research attention due to the possibility to combine the advantages derived from the properties of both components: flexibility and processability from the organic part and stability and optoelectronics features from the inorganic part. Thus, this review provides a synopsis on hybrid solar cells developed in the last decade which involve composite layers deposited by spin-coating, the most used deposition method, and matrix-assisted pulsed laser evaporation, a relatively new deposition technique. The overview is focused on the hybrid nanocomposite films that can use conducting polymers and metal phthalocyanines as p-type materials, fullerene derivatives and non-fullerene compounds as n-type materials, and semiconductor nanostructures based on metal oxide, chalcogenides, and silicon. A survey regarding the influence of various factors on the hybrid solar cell efficiency is given in order to identify new strategies for enhancing the device performance in the upcoming years.

In this paper we report the results of a photoelectrochemical study performed on photoanodes based on hematite nanowire arrays and films prepared on fluoride-doped tin oxide coated glass (FTO) and FTO/TiO2 substrates, respectively by hydrothermal and spray pyrolysis methods. The hematite nanowires grown on FTO/TiO2 substrate are more stable mechanically, longer (1 ?m) and their density on substrate is higher. Hematite film obtained on FTO substrate has a thickness of 92 nm covering uniformly the substrate. X-ray photoelectron spectroscopy measurements showed that hematite samples synthesized on FTO/TiO2 substrate have lower content of oxygen vacancies. The photoelectrochemical performances of the prepared photoanodes are in close connection with the presence or absence of the TiO2 underlayer, with oxygen vacancies content and with their morphological characteristics. Electrochemical impedace spectroscopy was used to investigate the charge transfer kinetics at electrode/electrolyte interface and Mott-Schottky analysis was performed to estimate the flatband potential and the carrier density. TiO2 underlayer led to the formation of defects on the samples surface which induced a positive shift of the flatband potentials compared to that of the bare hematite film. The results showed that the best density photocurrent was obtained with a photoanode of hematite nanowires grown on FTO/TiO2 substrate.

Environmentally-friendly bio-organic materials have become the centre of recent developments in organic electronics, while a suitable interfacial modification is a prerequisite for future applications. In the context of researches on low cost and biodegradable resource for optoelectronics applications, the influence of a 2D nanostructured transparent conductive electrode on the morphological, structural, optical and electrical properties of nucleobases (adenine, guanine, cytosine, thymine and uracil) thin films obtained by thermal evaporation was analysed. The 2D array of nanostructures has been developed in a polymeric layer on glass substrate using a high throughput and low cost technique, UV-Nanoimprint Lithography. The indium tin oxide electrode was grown on both nanostructured and flat substrate and the properties of the heterostructures built on these two types of electrodes were analysed by comparison. We report that the organic-electrode interface modification by nano-patterning affects both the optical (transmission and emission) properties by multiple reflections on the walls of nanostructures and the electrical properties by the effect on the organic/electrode contact area and charge carrier pathway through electrodes. These results encourage the potential application of the nucleobases thin films deposited on nanostructured conductive electrode in green optoelectronic devices.