National Institute Of Materials Physics - Romania

This study investigates the optimization of multiwalled carbon nanotube (MWCNT) concentration in polysiloxane-based nanocomposites to enhance the performance of triboelectric nanogenerators (TENGs). Flexible nanocomposite films were fabricated using the doctor blading method, and their triboelectric output was systematically evaluated as a function of MWCNT loading. The results reveal that incorporating MWCNTs significantly improves the electrical performance of the TENG, with the open-circuit voltage (V oc) and short-circuit current (I sc) increasing to 51 V and 5.7 mu A, respectively, at an optimal concentration of 0.05 wt %, compared to 32 V and 3.3 mu A for pristine polysiloxane films. However, further increasing the CNT content to 0.1 wt % led to a notable decline in output, attributed to nanoparticle agglomeration, which hinders effective charge transfer and promotes charge leakage. These findings underscore the crucial role of nanofiller dispersion and concentration control in the development of high-performance TENGs. This work provides valuable insights into the development of flexible, nanocomposite-based energy harvesting systems with enhanced output efficiency for wearable and portable electronic applications.

Diamond traceability has been a major challenge for the gemological industry in recent decades. In this context, this paper presents new studies using UV-VIS-NIR spectroscopy to identify the traceability and geographical origin of diamonds. The aim of the work is to identify characteristic centers of fancy-color diamonds collected from Cullinan Mine, Democratic Republic of Congo (DRC), and the geographical regions with unknown origin. Depending on the origin of the diamonds, the UV-VIS-NIR spectra can be differentiated as follows: (i) the diamonds collected from Cullinan Mine show absorption bands assigned to N10, NV0, NV-, N3V0, N4V2, and N4V centers, which are accompanied by a vibronic structure localized between 415 and 394 nm (2.987-3.147 eV) and (ii) the diamonds from DRC show absorption bands attributed to N10, NV-, N3V0, N1+, and NVH centers. Using Raman spectroscopy, nitrogen concentration values of diamonds collected from the Cullinan mines and DRC between 41 and 185 ppm and 204-336 ppm, respectively, were reported. We prove that the simultaneous applicability of UV-VIS-NIR spectroscopy and Raman scattering as comparative tools for assessing diamond provenance can be a valuable strategy for an initial attribution of diamonds with unknown geographical origin, knowing the optical features of diamonds collected from Cullinan Mine and DRC.

The rational integration of different-dimensional nanostructures offers a powerful platform for engineering synergistic functionalities in photocatalysis. Herein, we report the controllable synthesis of novel 2D/1D graphene/silver-silver sulphide (Ag-Ag2S) hybrid nanocomposites, wherein 1D Ag-Ag2S nanowires (NWs) are uniformly anchored onto conductive graphene sheets, affording a hierarchical hybrid structure with tailored optoelectronic properties. Structural characterization via X-ray Diffraction (XRD) confirmed the coexistence of crystalline Ag, Ag2S, and Ag2O phases, evidencing both hybridization and partial oxidation during growth. Complementary Scanning Electron Microscopy (SEM) imaging revealed a homogeneous distribution of NWs across the graphene scaffold, ensuring maximized interfacial contact. Optical investigations demonstrated distinct band gap features (2.5 eV for Ag2S, 3.8 eV for Ag NWs, and 4.6 eV for Ag2O). In comparison, the composite exhibited dual transitions at 3.28 eV and 4.72 eV, attributed to interfacial charge transfer between Ag2S and graphene, alongside enhanced plasmonic carrier dynamics. FTIR analyses further corroborated the hybrid composition, highlighting O-H and C 00000000 00000000 00000000 00000000 11111111 00000000 11111111 00000000 00000000 00000000 C stretching vibrations of graphene, CO bands from surface PVP ligands, and Ag-S/Ag-O vibrational modes consistent with XRD assignments. Harnessing these tailored structural and electronic attributes, the graphene/Ag-Ag2S heterostructures exhibited markedly superior photocatalytic activity toward methylene blue (MB) degradation, achieving a maximum efficiency of 89.55% under acidic conditions (pH 3) after 300 min of irradiation. Kinetic analysis revealed the highest rate constant (0.386 min-1) for the graphene/Ag-Ag2S nanocatalyst in acidic medium, surpassing both pristine Ag NWs and Ag-Ag2S. This work highlights the potential of spatially engineered graphene-based heterostructures to modulate band structures, enhance charge carrier transport, and thereby improve selective photocatalytic dye removal.

Cadmium sulfide (CdS) nanostructures were synthesized via sonochemical method with varying cadmiumto-sulfur (Cd:S) molar ratios (1:0.1, 1:0.25, 1:0.5, 1:0.75, and 1:1) to investigate the influence of stoichiometry on their structural, morphological, and optical properties. Scanning Electron Microscopy (SEM) analysis revealed that Cd-rich conditions (1:0.1) produced large, irregular agglomerates (similar to 254 nm) due to limited nucleation, whereas increasing sulfur content led to granular and anisotropic morphologies (1:0.25-1:0.75), including partially leaf-like/platelet structures (189-302 nm) driven by facet-selective S2- adsorption. Near-stoichiometric Cd:S ratios (1:1) yielded uniform, faceted nanoparticles (63-396 nm) with controlled growth. X-ray Diffraction (XRD) analysis confirmed a phase evolution from pure hexagonal (1:0.1-1:0.25) to mixed hexagonal - cubic (1:0.5), predominantly cubic (1:0.75), and re-emergent hexagonal coexistence (1:1). Crystallite sizes calculated via the Debye-Scherrer and Williamson-Hall methods ranged from 5.94 to 34.9 nm, correlating with phase stabilization and quantum confinement effects, while microstrain peaked at 8.42 x 10(-3) for the 1:0.5 sample, indicating lattice distortion during hexagonal - cubic coexistence. Ultraviolet-Visible (UV - Vis) spectroscopy showed direct band gaps between 5.18 and 5.41 eV, with the largest for the 1:0.5 sample, and indirect band gaps decreased to 3.32 eV at 1:0.25, reflecting defect-induced band distortion. Photoluminescence (PL) spectra revealed enhanced emission intensity at 547 nm for the 1:1 sample, attributed to defect-assisted recombination and improved surface passivation. Raman spectroscopy indicated phonon confinement, including suppression of the 2LO mode at intermediate compositions. Fourier-transform infrared (FTIR) spectra confirmed Cd - S bond formation and the presence of surface-capping 3-mercaptopropionic acid (3-MPA) ligands. Cd:S precursor ratio enables control over particle size, morphology, crystal phase, defect density, and optical properties, offering a versatile strategy to optimize CdS nanostructures for optoelectronic applications. [GRAPHICS] .

This work examines the influence of milling parameters on the evolution of the microstructure of Ni50Ti50 alloy prepared by high-energy mechanical alloying (MA). The study unveils a particle-folding phenomenon observed through scanning electron microscopy, which diverges from the conventional welding and fracturing mechanisms previously associated with MA. It is found that milling duration is critical, with particle folding being predominant in the initial stages, subsequently becoming less pronounced in favor of traditional processes over extended milling times. The research underscores the importance of processing parameters in achieving desired microstructural characteristics and suggests the potential for better control of nanocrystalline material properties. The outcomes present new opportunities for material synthesis, offering insights into the fabrication of nanomaterials with enhanced and tailored properties for various technological applications.

In this study, porous polysiloxane (PS)/multi-walled carbon nanotube (MWCNT) nanocomposite films were developed as high-performance triboelectric layers for flexible triboelectric nanogenerators (TENGs). TENGs convert mechanical motion into electricity and offer a promising solution for self-powered electronic systems. The nanocomposites were fabricated using a doctor blading method, and porosity was introduced via a simple, scalable salt-leaching technique. Sieved salt particles of varying sizes produced films with fine, medium, and large pores. Raman spectroscopy confirmed uniform MWCNT dispersion and strong interfacial interaction within the PS matrix. SEM analysis verified controlled pore morphology. Dielectric measurements showed reduced permittivity with increasing pore size due to air void incorporation. Triboelectric performance improved significantly with porosity; the medium porosity sample exhibited the best output with an open-circuit voltage of 65 V, short-circuit current of 6.9 mu A, and a power density of 280.6 mW m-2. This enhancement is attributed to the optimized combination of surface roughness, contact area, and dielectric behavior, promoting efficient charge generation and transfer. These results highlight the potential of microstructural engineering in porous nanocomposites for next-generation energy harvesting applications.

The crystallization mechanism of Yb/Er-doped GdF3 nanocrystals in silica nano-glass ceramics was analyzed using model-free and model-fitting methods and thermal analysis data in correlation with structural data. The formation of GdF3 nanocrystals occurs at around 300 degrees C, and their size is temperature dependent, ranging from 14 to 40 nm, depending on the processing temperature. A similar trend is observed for cell volume, where a contraction of up to approximate to 2.3% (at 600 degrees C) was assigned to the gradual incorporation of Li and Yb,Er dopants. Model-free analysis showed an increase in activation energy (Ea) and the preexponential factor (log A) up to 175 kJ mol-1 and 14.8 s-1, respectively, until the completion of crystallization. Model-fitting analysis indicated a crystallization process controlled by an autocatalytic-type reaction where a second metastable phase (LiF) acts as a catalyst and facilitates a rapid and self-accelerated crystallization of the main GdF3 nanocrystalline phase. The ceramization process boosted UC luminescence up to values comparable to those of NaYF4:18Yb/2Er.

Due to the importance of buffer layers in interface engineering, the development of more variants and the rational design of materials have a significant influence on the performance of optoelectronic devices. This study provides a strategy to increase device performance by facilitating efficient charge transfer and defect passivation by combining the properties of eco-friendly materials (adenine, cytosine, guanine, thymine, and uracil) with the physicochemical properties of metal oxides. The aim of this paper was to investigate the interaction of zinc oxide (ZnO) nanostructures (seed, nanoparticles, and nanowires) with nucleobase layers and to discuss their potential applications as organic-inorganic interfacial bilayers. The impact is analyzed from structural, morphological, optical, and electrical points of view. Nucleobase-ZnO nanostructure layers present high optical transparency in the visible range. Electrical measurements confirmed that the high surface area of nanowires can enhance interactions with nucleobases, leading to better charge transfer. The results showed that these nucleobase-ZnO nanostructure layers are promising interface materials for enhancing optoelectronic device performance through interfacial charge transport and light management, while enabling the design of environmentally friendly devices.

Integrating two-dimensional transition-metal dichalcogenides with graphene is attractive for low-power memory and neuromorphic hardware, yet sequential wet transfer leaves polymer residues and high contact resistance. We demonstrate a complementary metal-oxide-semiconductor (CMOS)-compatible, transfer-free route in which an atomically thin amorphous MoS2 precursor is RF-sputtered directly onto chemical vapor-deposited few-layer graphene and crystallized by confined-space sulfurization at 800 degrees C. Grazing-incidence X-ray reflectivity, Raman spectroscopy, and X-ray photoelectron spectroscopy confirm the formation of residue-free, three-to-four-layer 2H-MoS2 (roughness: 0.8-0.9 nm) over 1.5 cm x 2 cm coupons. Lateral MoS2/graphene devices exhibit reproducible non-volatile resistive switching with a set transition (SET) near +6 V and an analogue ON/OFF approximate to 2.1, attributable to vacancy-induced Schottky-barrier modulation. The single-furnace magnetron sputtering + sulfurization sequence avoids toxic H2S, polymer transfer steps, and high-resistance contacts, offering a cost-effective pathway toward wafer-scale 2D memristors compatible with back-end CMOS temperatures.

This study explores the optimization of multi-walled carbon nanotube (MWCNT) concentration in nylon-based nanocomposites to enhance the performance of triboelectric nanogenerators (TENGs). Nylon/MWCNT nanocomposite films were fabricated using the spin-coating method, and their electrical output was systematically evaluated as a function of MWCNT concentration. Results show that the open-circuit voltage (Voc) and short-circuit current (Isc) increase with MWCNT loading up to 0.05 wt%, reaching a peak of 29.7 V and 3.0 mu A, respectively, compared to 17.5 V and 1.8 mu A for pristine nylon-based TENGs. However, a decline in output was observed at 0.1 wt% due to MWCNT agglomeration, which disrupts charge transfer and introduces charge leakage. The enhancement at optimal concentration is attributed to improved charge trapping and increased dielectric constant, while excessive CNT loading reduces the effective contact area and limits triboelectric charge generation. These findings underscore the crucial role of nanomaterial dispersion in optimizing TENG performance and offer valuable insights for the development of high-efficiency triboelectric energy harvesting systems.