National Institute Of Materials Physics - Romania

Electrospun polymeric fibers present an emerging alternative for the development of flexible electronics, enabling applications in wearable sensors and biosensors for continuous monitoring, and actuators for tissue engineering. The possibility to prepare sub-micrometric polymeric scaffolds, their processing for increasing the conductivity, their modification with different materials, conductive polymers and biomolecules in order to obtain functional flexible electrodes, allows the development of innovative devices for healthcare, and biomedical applications. In this review, the impact of metallized electrospun polymeric fibers in electrochemical (bio)sensors and actuators is discussed. A relation between their structure and functionality is provided, alongside with an overview of the different methods to obtain functional conductive fibers.

ZnO nanostructures were electrochemically synthesized on Cu and on chemical vapor deposited (CVD)-graphene/Cu electrodes. The deposition was performed at different electrode potentials ranging from -0.8 to -1.2 V, employing a zinc nitrate bath, and using voltametric and chronoamperometric techniques. The effects of the electrode nature and of the working electrode potential on the structural, morphological, and optical properties of the ZnO structures were investigated. It was found that all the samples crystallize in hexagonal wurtzite structure with a preferential orientation along the c-axis. Scanning electron microscopy (SEM) images confirm that the presence of a graphene covered electrode led to the formation of ZnO nanowires with a smaller diameter compared with the deposition directly on copper surface. The photoluminescence (PL) measurements revealed that the ZnO nanowires grown on graphene/Cu exhibit stronger emission compared to the nanowires grown on Cu. The obtained results add another possibility of tailoring the properties of such nanostructured films according to the specific functionality required.

Hierarchical functionalization of flax fibers with ZnO nanostructures was achieved by electroless deposition to improve the interfacial adhesion between the natural fibers and synthetic matrix in composite materials. The structural, morphological, thermal and wetting properties of the pristine and ZnO-coated flax fibers were investigated. Thus, the ZnO-coated flax fabric discloses an apparent contact angle of similar to 140 degrees immediately after the placement of a water droplet on its surface. An assessment of the interfacial adhesion at the yarn scale was also carried out on the flax yarns coated with ZnO nanostructures. Thus, after the ZnO functionalization process, no significant degradation of the tensile properties of the flax yarns occurs. Furthermore, the single yarn fragmentation tests revealed a notable increase in the interfacial adhesion with an epoxy matrix, reductions of 36% and 9% in debonding and critical length values being measured compared to those of the pristine flax yarns, respectively. The analysis of the fracture morphology by scanning electron microscopy and X-ray microtomography highlighted the positive role of ZnO nanostructures in restraining debonding phenomena at the flax fibers/epoxyresin matrix interphase.

The present work reports a new configuration of soft artificial muscle based on a web of metal covered nylon 6/6 micrometric fibers attached to a thin polydimethylsiloxane (PDMS) film. The preparation process is simple and implies the attachment of metalized fiber networks to a PDMS sheet substrate while heating and applying compression. The resulting composite is versatile and can be cut in different shapes as a function of the application sought. When an electric current passes through the metallic web, heat is produced, leading to local dilatation and to subsequent controlled deformation. Because of this, the artificial muscle displays a fast and ample movement (maximum displacement of 0.8 cm) when applying a relatively low voltage (2.2 V), a consequence of the contrast between the thermal expanse coefficients of the PDMS substrate and of the web-like electrode. It was shown that the electrical current producing this effect can originate from both direct electric contacts, and untethered configurations i.e. radio frequency induced. Usually, for thermal activated actuators the heating is produced by using metallic films or conductive carbon-based materials, while here a fast heating/cooling process is obtained by using microfiber-based heaters. This new approach for untethered devices is an interesting path to follow, opening a wide range of applications were autonomous actuation and remote transfer of energy are needed.

The use of gold nanoparticles/superoxide dismutase (AuNP/SOD) bioconjugates is described as building blocks in SOD biosensor development for the quantification of superoxide in cell culture media. AuNP functionalization with 11-mercaptoundecanoic acid (MUA) and 4-mercaptobenzoic acid (MBA) (AuNPMUA and AuNPMBA) was used to improve SOD immobilization through EDC/NHS coupling using their -COOH terminus, leading to the formation of more stable bioconjugates. AuNP and AuNP/SOD bioconjugates were characterized by SEM to determine their size and morphology, UV-Vis for optical properties, FT-IR, and Raman spectroscopies for chemical functional group analysis and EDX for elemental analysis. Electrochemical methods were used to characterize the Au/AuNP-modified electrodes. For the optimization of the biosensor architecture, different AuNP/enzyme bioconjugates were prepared by varying the amount of both enzyme and AuNP, as well as their incubation time. Finally, the biosensors incorporating the bioconjugates were characterized by fixed potential amperometry and voltammetric analysis in order to establish the enzymatic mechanism and to elucidate the best biosensor architecture for monitoring superoxide in cell culture media. The best sensitivity value for superoxide detection corresponded to 41.2 nA mu M cm(-2), achieved by a biosensor based on AuNPMBA/SOD bioconjugates monitored through fixed potential amperometry at 0.3 V vs. Ag/AgCl, with a limit of detection of 1.0 mu M, and overall very good operational stability, maintaining 91% of the initial sensitivity after 30 days. Finally, the optimized biosensor was employed for the quantification of successive additions of superoxide in cell culture media, with excellent recovery values.

PC-12 cells have been widely used as a neuronal line study model in many biosensing devices, mainly due to the neurogenic characteristics acquired after differentiation, such as high level of secreted neurotransmitter, neuron morphology characterized by neurite outgrowth, and expression of ion and neurotransmitter receptors. For understanding the pathophysiology processes involved in brain disorders, PC-12 cell line is extensively assessed in neuroscience research, including studies on neurotoxicity, neuroprotection, or neurosecretion. Various analytical technologies have been developed to investigate physicochemical processes and the biosensors based on optical and electrochemical techniques, among others, have been at the forefront of this development. This article summarizes the application of different biosensors in PC-12 cell cultures and presents the modern approaches employed in neuronal networks biosensing.

High density (94-98% of the theoretical density) MgB2 samples added with C6H10Ge2O7 and cubic BN with compositions (MgB2)(1-x)(Ge2C6H10O7)(0.0028)(cBN)(x) (x = 0.003, 0.005, 0.007, 0.01) and (MgB2)(1-y)(Ge2C6H10O7)(y)(cBN)(0.005) (y = 0.0014, 0.0028, 0.005, 0.0075) were obtained by spark plasma sintering technique. For optimum doped samples with x = 0.005-0.007 and y = 0.0028-0.005, a weak enhancement of zero-field critical current density J(c0), irreversibility field H-irr, and volume pinning force F-p,F-max was determined. This behavior is very different from similar samples added with a single additive for which H-irr has a large enhancement. Consequently, it suggests the presence of opposite structural and microstructural effects induced by the additives. These effects, on the one hand, are discussed to decrease the sensitivity of MgB2 superconducting properties in the co-added samples comparative to samples added with C6H10Ge2O7, and, on the other hand, they contribute to anomalies that were found when assessing the pinning force-related parameters by the universal scaling law.

Tunable blue-white-orange emitting LaPO4:Ce3+/Mn2+/Zr4+(LPCMZ) phosphors have been synthesized by co precipitation followed by calcination. The X-ray diffraction (XRD) shows the phase transition from hexagonal to monoclinic between 600 and 700 ?C, accompanied by the increase of average nanocrystallites size from 8 to 64 nm. The Raman measurements revealed the vibrational modes associated with the LPCMZ crystalline phases, where the band positions and the full width at half maximum values depend on the structural parameters and nanocrystals size. For low-temperature calcination of 500 ?C, scanning electron microscopy (SEM) revealed nanoclusters composed of thinner nanoneedles, which developed into a rod-like self-assembly shape for higher calcination temperatures at around 900 ?C. Electron paramagnetic resonance (EPR) spectroscopy reveals a broad isotropic EPR signal, assigned to agglomerated/clustered Mn2+ ions, which are dispersed only at high temperatures above 900 ?C. The photoluminescence spectra recorded under UV-excitation of Ce3+ ions showed the Mn2+ green/red (546, 630 nm) emissions due to an energy transfer (ET) between Ce3+ and Mn2+. Depending on the calcination temperature, the Mn2+ emission color can be finely adjusted from blue to white and orange.

The consumer market requests infrared (IR) optical components, made of relatively abundant and environmentally friendly materials, to be integrated or attached to smartphones. For this purpose, three new chalcogenides samples, namely Ge23.3Zn30.0Se46.7 (d_GZSe-1), Ge26.7Zn20.0Se53.3 (d_GZSe-2) and Ba4.0Ge12.0Zn17.0Se59.0I8.0 (d_GZSe-3) were obtained by mechanical alloying and processed by spark plasma sintering into dense bulk disks. Obtaining a completely amorphous and homogeneous material proved to be difficult. d_GZSe-2 and d_GZSe-3 are glass-ceramics with the amount of the amorphous phase being 19.7 and 51.4 wt. %, while d_GZSe-1 is fully polycrystalline. Doping with barium and iodine preserves the amorphous phase formed by milling and lowers the sintering temperature from 350 degrees C to 200 degrees C. The main crystalline phase in all of the prepared samples is cubic ZnSe or cubic Zn0.5Ge0.25Se, while in d_GZSe-3 the amorphous phase contains GeSe4 clusters. The color of the first two sintered samples is black (the band gap values are 0.42 and 0.79 eV), while d_GZSe-3 is red (E-g is 1.37 eV) and is transparent in IR domain. These results are promising for future research in IR materials and thin films.

We theoretically investigate the spectral and quantum transport properties of two-dimensional heterostructures build up of different topological materials. Surprising behavior arises due to particular tuning of the edge states, provided by internal symmetries or an external magnetic field, in the different constituents of the heterostructure. Specifically, we use the Chern-type topological insulator and the Weyl semimetals with one or two interfaces interposed between these systems. The energy spectrum may contain gaps which exhibit edge states of alternating chirality or, on the contrary, of a given chirality everywhere in the spectrum. Then, the calculation predicts that the quantum Hall effect may lack the negative plateaus or show asymmetric plateaus in the lower and upper part of the spectrum. Also, the channel distribution on the finite size system with interfaces and attached leads may give rise to fractional values of the quantum Hall resistance. The calculations are based on a diatomic lattice model, with hopping to the nearest-and next-nearest-neighbors, exposed to an internal periodic flux (of Haldane-type), and also to an external magnetic field.