National Institute Of Materials Physics - Romania

Our Ultraflex UPT-n2  was designed  for nanoparticles research (magnetic hyperthermia on superparamagnetic iron oxides nanoparticles) Model:  UPT-n2 Nano Lite System for Nanoparticle Research Description: UPT-SHT-2/400 2 KW Power Supply – Interface Board • Capable of delivering full power (2 kW) in the 100kHz – 400kHz frequency range • AC Line, Voltage: 230 V, single phase, […]

The XRF spectrometer model WD-XRF S8 TIGER-1 kW manufactured by Bruker AXS GmbH (Germany) is a compact sequential WDXRF Spectrometer dedicated for multi-element qualitative, quantitative and standardless for elements from Be to U in solid, powders, pastes, liquids and thin film specimens. Characteristics: Fully automated without needing connections to cooling water and compressed air. Equipped […]

The Spark Plasma Sintering equipment, model D50 manufactured by FCT Systeme GmbH (Germany), is optimized to perform electrical field assisted sintering of metallic, ceramic or composite powders in a very short time at temperatures up to 2200 C. Our team has developed technologies based on the FAST (field assisted sintering technique)  process for producing various […]

The PSA equipment, model ANALYSETTE 22 NanoTec, manufactured by Fritsch GmbH (Germany) is dedicated to reliable measurement of the particle size distribution pf solids and suspensions down into the nanometric range using static laser light scattering. The system allows for a quick change between wet and dry measurement. Characteristics: Measuring range: wet dispersion: 0.01 – […]

The Planetary Ball Milling equipment, model PM400, manufactured by Retsch (part of Verder Scientific Group, was developed to both mix, mill and mechanical alloy metallic ceramic or mixtures of metallic and ceramic powders. The extremely high centrifugal forces of Planetary Ball Mills result in very high pulverization energy and therefore short grinding times. Characteristics: Up […]

Characteristics: Produced batches: 5 g up to approx. 10 g per run, depending on material / copper spinning wheel φ 200 mm / RF generator power 6 kW / frequency range 20-150 kHz / spinning wheel with tangential velocity 3 to 60 m/s / high vacuum chamber (< 10-5 mbar) / can be operated with […]

The MICROTECH MX3 system consists of the hardness tester model MMT-X3 manufactured by Matsuzawa Co.Ltd. (Japan) and the PRESI VIEW HARDNESS PACK software developed by PRESI SAS. (France). In the current configuration the system can measure and evaluate the Vickers hardness of materials using loads up to 1 kgf (HV-1). Characteristics: Loads : 5, 10, […]

The thermal analysis system SETSYS Evolution is a system for dynamic scanning calorimetry (DSC) and differential thermal analysis (DTA), which is combined with a thermogravimetric (TG) unit. The system is used to determine thermal characteristics and to analyze the thermal behavior of a wide variety of materials and layer systems.  The SETSYS can be configured […]

For preparation of materials by wet chemistry methods. Includes fume hood Biobase, heating mantle Winkler, magnetic stirrer with hot plate Heidolph, home manufactured autoclave, oven for heat treatment in gas flow. Characteristics: –  fume hood exhaust volume 800 m3/ h –  fume hood intake air velocity (8 velocity steps, >0.50 m/s) –  magnetic stirrer hotplate […]

The 8000M Mixer/Mill is a high-energy ball mill that grinds between 0.3 – 10 grams of samples, depending of density. The complex movement (8 shape figure) allows obtaining high energy. Characteristics: – 875 cycles per minute – dry or wet milling  –  sample size per vial: up to 10 ml for grinding tough samples and […]