National Institute Of Materials Physics - Romania

In the last few decades, the intensive use of agricultural lands affected crop productivity and thus raised serious concerns due to competing demands for food to feed the ever-growing world population (projected to be 9.7 billion by 2050). In this context, the development of nanotechnology-based fertilizers for crop nutrition has been suggested as an alternative tool to overcome the drawbacks arising from the current agricultural practices. Unfortunathelly, there is little studies about the effects of nanomaterials on plants. In this study we presented the effect of hydroxyapatite (nHA) and iron oxides (nIO) nanoparticles obtained in Romania on growth and photosintesis of corn and winter wheat plants. The results show that hydroxyapatite (nHA) and iron oxides (nIO) treatments applied by watering the soil had a positive effect on the photosynthesis of maize and winter wheat plants. In the case of treatments with solutions of iron oxides a negative effect on the length of main root was observation, but a compensating effect was found by increasing root density. This and also the higher chlorophyll content. led to a positive effect on height of maize and winter wheat plants.

The 20S proteasome enzyme complex is involved in the proteolytic degradation of misfolded and oxidatively damaged proteins and is a focus of medical research for the development of compounds with pharmaceutical properties, which are active in cancer cells and/or neurodegenerative diseases. The present study aims to develop a biosensor for investigating the 20S proteasome activity and inhibition by means of electrochemical methods. The 20S proteasome is best immobilized at the electrode surface through bio-affinity interactions with antibodies that target different subunits on the 20S proteasome, enabling the investigation of the effect of an enzyme's orientation on biosensor response. The enzymatic activity is analyzed by fixed potential amperometry with the highest sensitivity of 24 mu A cm(-2) mM(-1) and a LOD of 0.4 mu M. The detection principle involves the oxidation of an electroactive probe that is released from the enzyme's substrates upon proteolysis. The most sensitive biosensor is then used to study the multicatalytic activity of the 20S proteasome, i.e. the caspase-, trypsin- and chymotrypsin-like activity, by analyzing the biosensor's sensitivity towards different substrates. The behavior of the immobilized 20S proteasome is investigated as a function of substrate concentration. The kinetic parameters are derived and compared with those obtained when the enzyme was free in solution, with K-0.5 values being one to two orders of magnitude lower in the present case. Two 20S inhibitors, epoxomicin and bortezomib, are investigated by analyzing their influence on the 20S biosensor response. The proposed analytical method for proteasome activity and inhibitor screening has the main advantage of being cost-effective compared to the ones typically employed.

Herein, the properties of the organic heterostructures with triple-layer ZnO/Ag/ZnO as a replacement for ITO and mixed layer containing arylenevinylene oligomer (based on triphenylamine or carbazole) donor and nonfullerene (perylene diimide) acceptor mixed in the ratio 1:2 and the effect of a buffer layer of PEDOT-PSS intercalated between triple layer and mixed organic layer are discussed. The UV-vis transmission and photoluminescence (PL) properties are investigated in correlation with the surface topography and reveal a good match between the absorption and emission domain, which can favor the generation of the charge carriers. The heterostructure with the mixed layer based on triphenylamine oligomer shows the widest absorption domain, and the PL spectra of the heterostructures realized with either triphenylamine or carbazole oligomer show peaks corresponding to the radiative decay of the donor and acceptor. The I-V characteristics in the dark indicate a slightly nonlinear behavior and the current is affected by the charge carriers recombination on the defects present in the thick mixed layer deposited by matrix-assisted pulsed laser evaporation. The effect of the PEDOT-PSS buffer layer on the electrical properties of the organic heterostructure with ZnO/Ag/ZnO electrode is also investigated.

Y2O3:Yb(3+)5 at% ceramics have been synthesized by the reactive sintering method using different commercial yttria powders (Alfa-Micro, Alfa-Nano, and ITO-V) as raw materials. It has been shown that all Y(2)O(3)starting powders consist from agglomerates up to 5-7 mu m in size which are formed from 25-60 nm primary particles. High-energy ball milling allows to significantly decreasing the median particle sizeD(50)below 500 nm regardless of the commercial powders used. Sintering experiments indicate that powder mixtures fabricated from Alfa-Nano yttria powders have the highest sintering activity, while (Y0.86La0.09Yb0.05)(2)O(3)ceramics sintered at 1750 degrees C for 10 h are characterized by the highest transmittance of about 45%. Y2O3:Yb(3+)ceramics have been obtained by the reactive sintering at 1750-1825 degrees C using Alfa-Nano Y(2)O(3)powders and La2O3+ZrO(2)as a complex sintering aid. The effects of the sintering temperature on densification processes, microstructure, and optical properties of Y2O3:Yb(3)(+)5 at% ceramics have been studied. It has been shown that Zr(4)(+)ions decrease the grain growth of Y2O3:Yb(3+)ceramics for sintering temperatures 1750-1775 degrees C. Further increasing the sintering temperature was accompanied by a sharp increase of the average grain size of ceramics referred to changes of structure and chemical composition of grain boundaries, as well as their mobility. It has been determined that the optimal sintering temperature to produce high-dense yttria ceramics with transmittance of 79%-83% and average grain size of 8 mu m is 1800 degrees C. Finally, laser emission at similar to 1030.7 nm with a slope efficiency of 10% was obtained with the most transparent Y2O3:Yb(3+)5 at% ceramics sintered.