National Institute Of Materials Physics - Romania

Due to the currently worldwide petrochemical feedstock shortage, the ethylene synthesis from renewable non-oil sources becomes of high interest. The catalysts were prepared in two steps: (i) formation of spheres containing the carbon-coated Mn core by hydrothermal method, (ii) formation of the Si-Zr oxide shell by sol-gel method. The prepared catalysts were characterized by N2 physisorption, SEM-EDX, XRD, XPS, and NH3-TPD. The catalytic results have shown that Fe, Zn or Ni modified Mn core exhibited superior activity compared to the catalysts containing only Mn in the core. With 75% yield and 98% ethanol conversion at 350 degrees C and WHSV of 1.4 h-1, MnNi@SiZr was the best catalyst. These results are due to an increased number of acid sites compared to the other materials and an optimal ratio of weak/medium acid sites. Our findings suggest new lines for developing active and stable catalysts for ethylene synthesis from ethanol.

The high-k-based MOS-like capacitors are a promising approach for the domain of non-volatile memory devices, which currently is limited by SiO2 technology and cannot face the rapid downsizing of the electronic device trend. In this paper, we prepare MOS-like trilayer memory structures based on high-k ZrO2 by magnetron sputtering, with a 5% and a 10% concentrations of Zr in the Zr-ZrO2 floating gate layer. For crystallization of the memory structure, rapid thermal annealing at different temperatures between 500 degrees C and 700 degrees C was performed. Additionally, Al electrodes were deposited in a top-down configuration. High-resolution transmission electron microscopy reveals that ZrO2 has a polycrystalline-columnar crystallization and a tetragonal crystalline structure, which was confirmed by X-ray diffraction measurements. It is shown that the tetragonal phase is stabilized during the crystallization by the fast diffusion of oxygen atoms. The capacitance-voltage characteristics show that the widest memory window (Delta V = 2.23 V) was obtained for samples with 10% Zr annealed at 700 degrees C for 4 min. The charge retention characteristics show a capacitance decrease of 36% after 10 years.

A deeper understanding of the coupling at the interface of multiferroics heterostructures is being achieved by the use of synchrotron radiation techniques. Here, the authors use k-resolved soft X-ray photoemission spectroscopy and first principles calculations to investigate the band structure of several multiferroic heterostructures, isolating the distinct signature of the interface. Physics of the multiferroic interfaces is currently understood mostly within a phenomenological framework based on screening of the polarization field and depolarizing charges. Additional effects still unexplored are the band dependence of the interfacial charge modulation and the associated changes of the electron-phonon interaction, coupling the charge and lattice degrees of freedom. Here, multiferroic heterostructures of the colossal-magnetoresistance manganite La1-xSrxMnO3 buried under ferroelectric BaTiO3 and PbZrxTi1-xO3 are investigated using soft-X-ray angle-resolved photoemission. The experimental band dispersions from the buried La1-xSrxMnO3 identify coexisting two-dimensional hole and three-dimensional electron charge carriers. The ferroelectric polarization modulates their charge density, affecting the coupling of the 2D holes and 3D electrons with the lattice which forms large Frohlich polarons inherently reducing mobility of the charge carriers. Our k-resolved results on the orbital occupancy, band filling and electron-lattice interaction in multiferroic oxide heterostructures modulated by the ferroelectric polarization disclose most fundamental physics of these systems needed for further progress of beyond-CMOS ferro-functional electronics.

Carbon quantum dots (CQDs) derived from biomass, a suggested green approach for nanomaterial synthesis, often possess poor optical properties and have low photoluminescence quantum yield (PLQY). This study employed an environmentally friendly, cost-effective, continuous hydrothermal flow synthesis (CHFS) process to synthesise efficient nitrogen-doped carbon quantum dots (N-CQDs) from biomass precursors (glucose in the presence of ammonia). The concentrations of ammonia, as nitrogen dopant precursor, were varied to optimise the optical properties of CQDs. Optimised N-CQDs showed significant enhancement in fluorescence emission properties with a PLQY of 9.6% compared to pure glucose derived-CQDs (g-CQDs) without nitrogen doping which have PLQY of less than 1%. With stability over a pH range of pH 2 to pH 11, the N-CQDs showed excellent sensitivity as a nano-sensor for the highly toxic highly-pollutant chromium (VI), where efficient photoluminescence (PL) quenching was observed. The optimised nitrogen-doping process demonstrated effective and efficient tuning of the overall electronic structure of the N-CQDs resulting in enhanced optical properties and performance as a nano-sensor.

We report in this paper on the monolayer composites thin films that have the magnetic spinel CoFe2O4 and the piezoelectric perovskite BNT-BT0.08 as constituent phases. Composite thin films of CoFe2O4 and BNT-BT0.08, with molar ratios of 0.5:1, 1:1 and 1.5:1, have been deposited by spin coating method from a sol precursor, mixture type, of CoFe2O4 and BNT-BT0.08. The monolayer thin films, deposited on Si/SiO2/TiO2/Pt substrate, were characterized using selected methods, such as: X-ray diffraction, scanning electron microscopy, atomic force microscopy/piezoelectric force microscopy, dielectric spectroscopy, and vibrating sample magnetometer. X-ray diffraction demonstrated the two phases: cubic CoFe2O4 and rhombohedral BNT-BT0.08. Furthermore, the Si/ SiO2/TiO2/Pt/BNT-BT0.08/CoFe2O4 monolayers show a simultaneous enhancement of both the magnetization and coercivity with the increase of the magnetic phase, accompanied by a decrease of the dielectric constant. The obtained results reveal that the investigated monolayer structures present superior properties compared to those of bilayer composites.

The ability of TiO2 to generate reactive oxygen species under UV radiation makes it an efficient candidate in antimicrobial studies. In this context, the preparation of TiO2 microparticles coated with Ca- and Cu-based composite layers over which Cu(II), Cu(I), and Cu(0) species were identified is presented here. The obtained materials were characterized by a wide range of analytical methods, such as X-ray diffraction, electron microscopy (TEM, SEM), X-ray photoelectron (XPS), and UV-VIS spectroscopy. The antimicrobial efficiency was evaluated using qualitative and quantitative standard methods and standard clinical microbial strains. A significant aspect of this composite is that the antimicrobial properties were evidenced both in the presence and absence of the light, as result of competition between photo and electrical effects. However, the antibacterial effect was similar in darkness and light for all samples. Because no photocatalytic properties were found in the absence of copper, the results sustain the antibacterial effect of the electric field (generated by the electrostatic potential of the composite layer) both under the dark and in light conditions. In this way, the composite layers supported on the TiO2 microparticles' surface can offer continuous antibacterial protection and do not require the presence of a permanent light source for activation. However, the antimicrobial effect in the dark is more significant and is considered to be the result of the electric field effect generated on the composite layer.

The incorporation of therapeutic-capable ions into bioactive glasses (BGs), either based on silica (SBGs) or phosphate (PBGs), is currently envisaged as a proficient path for facilitating bone regeneration. In conjunction with this view, the single and complementary structural and bio-functional roles of CuO and Ga2O3 (in the 2-5 mol% range) were assessed, by deriving a series of SBG and PBG formulations starting from the parent glass systems, FastOs (R) BG -38.5SiO2-36.1CaO-5.6P2O5-19.2MgO-0.6CaF2, and 50.0P2O5-35.0CaO-10.0Na2O-5.0 Fe2O3 (mol%), respectively, using the process of melt-quenching. The inter-linked physico-chemistry -biological response of BGs was assessed in search of bio-functional triggers. Further light was shed on the structural role -as network former or modifier -of Cu and Ga, immersed in SBG and PBG matrices. The preliminary biological performance was surveyed in vitro by quantification of Cu and Ga ion release under homeostatic conditions, cytocompatibility assays (in fibroblast cell cultures) and antibacterial tests (against Staphylococcus aureus). The similar (Cu) and dissimilar (Ga) structural roles in the SBG and PBG vitreous networks governed their release. Namely, Cu ions were leached in similar concentrations (ranging from 10-35 ppm and 50-110 ppm at BG doses of 5 and 50 mg/mL, respectively) for both type of BGs, while the release of Ga ions was 1-2 orders of magnitude lower in the case of SBGs (i.e., 0.2-6 ppm) compared to PBGs (i.e., 9-135 ppm). This was attributed to the network modifier role of Cu in both types of BGs, and conversely, to the network former (SBGs) and network modifier (PBGs) roles of Ga. All glasses were cytocompatible at a dose of 5 mg/mL, while at the same concentration the antimicrobial efficiency was found to be accentuated by the coupled release of Cu and Ga ions from SBG. By collective assessment, the most prominent candidate material for the further development of implant coatings and bone graft substitutes was delineated as the 38.5SiO2-34.1CaO-5.6P2O5-16.2MgO-0.6CaF2-2.0CuO-3.0Ga2O3 (mol%) SBG system, which yiel-ded moderate Cu and Ga ion release, excellent cytocompatibility and marked antibacterial efficacy. (c) 2021 The Chinese Ceramic Society. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

In this paper we present an in-depth theoretical investigation of an electron scattering process on a graphene quantum dot (GQD) supposed to a perpendicular magnetic field. As it is well known, because of Klein tunneling, an electrostatic potential is not helpful to localize an electron inside a GQD. However, we report here that in the case of a magnetic driven GQD, there emerge scattering resonances characterized by trapped electronic states inside the dot for finite periods of time, otherwise known as quasi-bound states. Using a real space scattering analysis, we highlight in a very intuitive manner how the quasi-bound states are generated and, for a comprehensive investigation, we evaluate their corresponding lifetime (trapping time). As well, we explore the case of an electrostatically biased GQD. We show that this configuration may be very advantageous regarding the control of the trapping times which reach values much higher than in the unbiased case.

Catalysts are frequently used as pelletized powdered materials, but rarely as thin films. The present work reports the use of 2D h-boron nitride on few layers defective graphene (h-BN/fl-G) films of about 10 nm thickness as base catalyst for the synthesis of benzoxazoles by coupling a 2-amino-phenol with p-substituted benzaldehydes. The synthesis of benzoxazole derivatives has aroused much interest in the last decades due to their application as potent anticancer agents against MCF-7 and MDA-MB-231 breast cancer cells. The results demonstrate that these nanometer-thick films exhibit three orders of magnitude higher activity than K2CO3 taken as benchmark base catalyst. The activity and selectivity of h-BN/fl-G films depend on the nature of substituents on benzaldehyde, the solvent and reaction temperature.

In this study, stannite, Cu2FeSnS4 (CFTS), absorber films were obtained by electrodeposition on Molybdenum-coated soda-lime substrates, followed by sulfurization treatment at certain temperatures in the 400-550 degrees C range. The purposes of this work were to control the manufacturing of CFTS films with good stoichiometry, high crystallinity and to study the annealing temperature impact on CFTS films properties. The X-ray diffraction and the Raman spectroscopy measurement distinguished the CFTS phase formation, with a presence of SnS2 secondary phase. The energy dispersive spectroscopy results reveal compositional differences between samples as well as the in-depth gradients. The photoluminescence emission band around 1.35-1.40 eV is slightly below the direct bandgap inferred from the conventional spectroscopy (diffuse reflectance). X-ray photoelectron spectroscopy results indicate clearly a high amount of Sn on the surface. The Conversion Electron Mossbauer unveiled the presence of Fe in the chalcogenide unit cell. The electrochemical characteristics of the synthesized films are also given. (c) 2022 Elsevier B.V. All rights reserved.