National Institute Of Materials Physics - Romania

Over the past two decades, the CICECO-hub scientists have devoted substantial efforts to advancing bioactive inorganic materials based on calcium phosphates and alkali-free bioactive glasses. A key focus has been the deliberate incorporation of therapeutic ions like Mg, Sr, Zn, Mn, or Ga to enhance osteointegration and vascularization, confer antioxidant properties, and impart antimicrobial effects, marking significant contributions to the field of biomaterials and bone tissue engineering. Such an approach is expected to circumvent the uncertainties posed by methods relying on growth factors, such as bone morphogenetic proteins, parathyroid hormone, and platelet-rich plasma, along with their associated high costs and potential adverse side effects. This comprehensive overview of CICECO-hub ' s significant contributions to the forefront inorganic biomaterials across all research aspects and dimensionalities (powders, granules, thin films, bulk materials, and porous structures), follows a unified approach rooted in a cohesive conceptual framework, including synthesis, characterization, and testing protocols. Tangible outcomes [injectable cements, durable implant coatings, and bone graft substitutes (scaffolds) featuring customized porous architectures for implant fixation, osteointegration, accelerated bone regeneration in critical-sized bone defects] were achieved. The manuscript showcases specific biofunctional examples of successful biomedical applications and effective translations to the market of bone grafts for advanced therapies.

MoS2 has proven its efficacy in flexible electronics, transistor devices, and various biological and chemical applications. However, it is still challenging to achieve large-area MoS2 monolayers with desired material quality and electrical properties to fulfill the requirement for practical applications. Moreover, the main strategy for the preparation of a 2D heterostructure it is based on the sequential stacking of the layered materials using wet or dry transfer methods which introduces many defects. This paper presents an economically viable and straightforward two-step methodology to obtain MoS2 thin films, encompassing magnetron sputtering deposition of Mo and subsequent annealing in a sulfur-rich environment. This approach successfully yielded MoS2 thin films on Si\SiO2 substrates. Additionally, heterostructures consisting of few layer graphene (FLG) and MoS2 were directly obtained using the same method. The utilization of grazing incidence X-ray diffraction verified the formation of the hexagonal MoS2 phase, a finding further confirmed by Raman spectroscopy. X-ray photoelectron spectroscopy (XPS) investigations revealed the successful sulfurization process, with surface-bound oxides forming only subsequent to air exposure. Comprehensive assessment involving X-ray reflectivity, atomic force microscopy and XPS collectively inferred the fabrication of thin films comprised of a small number of MoS2 layers covering the entire substrate. Electrical assessments exhibited an electrical hysteresis, demonstrating its potential for memristor applications. Overall, this study outlines a cost-effective fabrication method for producing nanoscale MoS2 thin films with excellent properties, avoiding the use of toxic gases such as H2S. These findings contribute to the potential development of cutting-edge applications.

Recently, a smart strategy for two-dimensional (2D) materials synthesis has emerged, namely space-confined chemical vapor deposition (CVD). Its extreme case is the microreactor method, in which the growth substrate is face-to-face stacked on the source substrate. In order to grow 2D transition metal dichalcogenides by this method, transition metal oxides, dispersed in very small amounts on the source substrate, are used as source materials in most of the published reports. In this paper, a colloidal dispersion of MoS2 in saline solution is used and MoS2 nanosheets with various shapes, sizes (between 5 and 60 mu m) and thicknesses (2-4 layers) have been synthesized. Small MoS2 flakes (regular or defective) are present on the surface of the nanosheets. Catalytic sites, undercoordinated atoms located at the edges of MoS2 flakes and nanosheets, are produced in a high number by a layer-plus-island (Stranski-Krastanov) growth mechanism. Several double-resonance Raman bands (at 147, 177, 187, 225, 247, 375 cm(-1)) are assignable to single phonon processes in which the excited electron is elastically scattered on a defect. The narrow 247 cm(-1) peak is identified as a topological defect-activated peak. These findings highlight the potential of defect engineering in material property optimization, particularly for solar water splitting applications.

Carbon monoxide (CO) is reversibly adsorbed on and desorbed from ferroelectric (001) oriented, BaO-terminated barium titanate. All processes are characterized in real time via photoelectron spectroscopy. Adsorption proceeds on different sites/geometries as a function of substrate temperature. Below room temperature, CO is adsorbed on surface Ba. At room temperature, adsorption proceeds on surface oxygen, whereas at high temperatures, "hollow" site adsorption occurs with carbon coordinated with three oxygens, one oxygen initially belonging to CO and two oxygens from the substrate. The amount of CO adsorbed is about one molecule for 10 surface unit cells, which is slightly increased at low temperatures. CO is desorbed if the substrate is heated above the Curie temperature, which is a sign of the definitory role of ferroelectric polarization. The BaTiO3(001) surface is unaffected by repeated cycles of adsorption-desorption.

The present study aims to describe the role of the grain size on the properties of submicron- and nano-structured Ba0.8Sr0.2TiO3 (BST) ceramics. Dense (1 - 2% porosity) ceramics with average grain sizes in the range of (77 234) nm were consolidated under different spark plasma sintering conditions starting from nanopowders with a mean particle size of 70 nm, synthesized via the acetate variant of the sol-gel method. The structural analysis based on XRD data revealed a mixture of cubic and tetragonal modifications at room temperature for the precursor powders and for all the investigated ceramics. The structural heterogeneity of the individual ceramic grains with coexistence of cubic and tetragonal polymorphs was confirmed by HR-TEM investigations. Accordingly, a "brick-wall" model with cubic grain boundary regions and tetragonal grain cores is proposed. By increasing the grain size, from 77 to 234 nm, a decrease of the phase transitions diffuseness accompanied by an increase of the permittivity maxima (from 650 to 4500) and dielectric losses (from 5 to 7.5%, at 100 Hz), was detected by broadband dielectric spectroscopy. No variation of the Curie temperature in the investigated Ba0.8Sr0.2TiO3 ceramics was detected, unlike typically reported for BaTiO3 ceramics with similar grain sizes. The Curie-Weiss temperature and the Curie constant decrease when grain size is diminished, indicating an overall reduction of the ferroelectric active volume, as a scaling effect. The ferroelectric switching was demonstrated for all the selected fine-grained BST ceramics, either at nanoscale or macroscopically, with an increased ferroelectric character for the coarser submicron-structured ceramics, with respect to the nanocrystalline one. The observed properties of the fine-grained Ba0.8Sr0.2TiO3 ceramics are explained in the frame of multiphase coexistence and ferroelectricity "dilution" due to the increasing role of non-ferroelectric grain boundaries when reducing grain size and complete the knowledge on the scale-dependent properties of dense fine-grained BaTiO3-based ceramics.

Considering the increasing need for sustainable and economical energy storage solutions, the integration of layered materials such as MoS2 into these systems represents an important step toward enhancing energy sustainability and efficiency. Exploring environmentally responsible fabrication techniques, this study assesses wrinkled MoS2 thin films synthesized from distinct Mo and MoS2 targets, followed by sulfurization conducted in a graphite box. We utilized magnetron sputtering to deposit precursor Mo and MoS2 films on Si substrates, achieving thicknesses below 20 nm. This novel approach decreases sulfur by up to tenfold during sulfurization due to the confined space technique, contributing also to avoiding the formation of toxic gases such as SO2 or the necessity of using H2S, aligning with sustainable materials development. Thinner MoS2 layers were obtained post-sulfurization from the MoS2 precursors, as shown by X-ray reflectometry. Raman spectroscopy and grazing X-ray diffraction analyses confirmed the amorphous nature of the as-deposited films. Post-sulfurization, both types of films exhibited crystalline hexagonal MoS2 phases, with the sulfurized Mo showing a polycrystalline nature with a (100) orientation and sulfurized MoS2 displaying a (00L) preferred orientation. The X-ray photoelectron spectroscopy results supported a Mo:S ratio of 1:2 on the surface of the films obtained using the MoS2 precursor films, confirming the stoichiometry obtained by means of energy dispersive X-ray spectroscopy. Scanning electron microscopy and atomic force microscopy images revealed micrometer-sized clusters potentially formed during rapid cooling post-sulfurization, with an increased average roughness. These results open the way for the further exploration of wrinkled MoS2 thin films in advanced energy storage technologies.

In this study, we synthesized thin films of semiconductor Cu 2 CoSnS 4 (CCTS). We investigated the mechanism of CCTS electrodeposition precursor onto fluorine -doped tin oxide (FTO) surface. This investigation utilized various mixed additives (Trisodium citrate, Glycine, and Boric acid) through voltammetric and chronoamperometric techniques. The polarization cathodic indicated that the additives narrowing the potential range for electrodeposition of the four elements. The reduction of S 2 O 3 2- was mainly induced by the effect of metal ions. The current transient was analyzed using the Astley and Scharifker-Hills models. Trisodium citrate electrolyte showed an instantaneous model followed by 3D diffusion -limited growth. Both trisodium citrate mixed with glycine and trisodium citrate mixed with boric acid shifted towards the progressive nucleation model. Trisodium citrate with tartaric acid showed a strong agreement with progressive nucleation. In -situ electrochemical impedance spectroscopy (EIS) evaluated a low charge transfer resistance for CCTS precursor electrodeposition in trisodium citrate electrolyte. The X-ray diffraction and Raman analysis study revealed the stannite structure of the obtained Cu 2 CoSnS 4 thin film. The morphological properties and thickness of the films were investigated using a scanning electron microscope (SEM). The compositions were determined using energy dispersive spectroscopy which indicated different atomic ratios of Cu-Co-Sn-S. The maximum absorption was observed within the 1.5 eV range for the film deposited in the Trisodium citrate bath, as determined by spectroscopic ellipsometry.