National Institute Of Materials Physics - Romania

Technical details: – Heating range 25-400oC (or up 600 oC), N2 flow – Various heating rates: 1-7oC/sec. – High range of linearity (7 orders) – Photomultiplier detector (thermoelectrically cooled) Performances: – Different programable profiles “time-temperature”; – Optional optical glass filters for TL detection – Persistent luminescence detection– software for thermoluminescence curves deconvolution

Utilization for Photoconduction spectra and I -V characteristics measurement Applications: caracterization of thin films and structures Characteristics: System containing 1. Chopper (Stanford Research System, Model SR 540 chopper controller); 2. Monochromator System (Oriel Cornerstone, Model 130 1/8 m) with interfaces and 5 gratings (180-650 nm; 200-1600 nm; 1100-5000 nm; 4.5-20 mm); 3.Lock-in nanovoltmeter 232 B; […]

Utilization: optical characterization of organic, biological and inorganic samples combining Near Field Optical Microscopy with Scanning Probe Microscopy offering simultaneously optical and topographical information with a minimal preparation of the sample; Applications: material science, nanotechnology (nano-photonics and nano-optics), biology, medicine (detection of the most minuscule surface structures of transparent and opaque samples). Characteristics: Dual Optical […]

In the low frequency module, measurements are made between 30 μHz and 10 MHz and at temperatures between -150 °C and +400 °C. Measuring ranges: Z: 0.01…1014 Ohm, C: 1fF…1F; losses 10-5…104; Ualt: 10-4…3 Vrms; UC: -40…+40 V. The relative accuracy of impedance, capacitance measurement is <3·10-5; of the loss factor is <3·10-5; of the […]

Characterisation: -wetting/adhesion properties of the surfaces; -contact angle as function of temperature (up to 400 °C); – surface/interfacial tension of liquids -Temperature range: from 20°C to 400°C depending on each investigated liquid; -Measurement of contact angles in static or dynamic mode with temperature variation (20-400°C). -Measurement of the free energy of solids with temperature variation […]

Characterisation: -density of liquids as function of temperature (up to 90 °C), and with external cell DMA HP (up to 200°C) Density range0-3 (±0.00005) g/cm3; Temperature range 0-90 (±0.03) °C; Services offered to users: determination of sugar/alcohol content in drinks, control of additives/fuels, batch consistency.

Technical details:Voltammetry Maximum compliance voltage ± 30 V Maximum current output ± 1A Maximum polarisation voltage ± 15 V Scan rate 0.01- 20 V s-1 Best current resolution: 0.3 pA Electrochemical Impedance Max. Frequency 100 KHz Min. Frequency 1 mHz Software VoltaMaster4 Services offered to users: studies by cyclic voltammetry, electrochemical impedance spectroscopy, corrosion (polarization […]

Technical details: – Power supply: 100-240Vac – 50-60 Hz  – KVA – Scanning performances: acquisition times ³ 100 ms – Auxiliary voltage  (compliance): ± 20 V – Maximum current: ± 500 mA/± 1A/±5A -Applied voltage: ±15V -Current measurement: -9 ranges from 5 nA to 500 mA for OGF500 – 9 ranges from 10 nA to […]

Technical details: Tube Furnace Model No. CY-1200X-III-50IC with sliding rail support, 2 flange supports and vacuum pump – Quartz tube with OD 50 mm, flanges, pressure Gauge – Double layer structure – Chamber: high purity alumina refractory fiber – Length of furnace: ~ 800 mm – Three heating zone with length: 220 mm / 220 […]

Magnetron sputtering is deposition technology used to deposit thin layers of a target material (cathode) on the surface of a substrate (anode). The method allows to obtain single- and multi-layer structures and offers the possibility to clean the substrate with the ion beam. No of magnetrons:                  6 Working pressure:                   2* 10-6 ~ 2* 10-2 […]