National Institute Of Materials Physics - Romania

The increasing demand for greener technologies in environmental remediation makes carbon materials from biomass and its derivatives some of the most attractive resources for a sustainable future. However, integrating these materials with stable free radicals remains challenging. This study presents a straightforward one-pot hydrothermal route using raw honey as the carbon source and 4-amino 2,2,6,6-tetramethylpiperidine-1-oxyl (4-amino-TEMPO) as the free radical. The addition of TEMPO derivative initiates Maillard reactions between its amino group and the carbonyl groups of the carbohydrates in honey, resulting in the formation of a functionalized hydrochar with a spherical morphology (similar to 8 mu m). The presence of free radicals within the carbonaceous matrix was confirmed by electron spin resonance spectroscopy, supported by infrared spectroscopy, elemental analysis, thermal analysis, scanning electron microscopy, and X-ray photoelectron spectroscopy. The free radical content was estimated at 0.4 mmol center dot g(-1). The material effectively removed methylene blue, fluorescein, and doxorubicin from water in the presence of green oxidants like hydrogen peroxide and sodium hypochlorite. After 24 h, removal efficiencies reached 92% for doxorubicin, 73% for methylene blue, and 23% for fluorescein. Moreover, the hydrochar demonstrated good regeneration capability, maintaining its dye removal efficiency over several cycles.

This work investigates the influence of composition on the thermal properties of the high entropy alloy family Cu5Cr35Fe35V20-X-5 (at. %), where X = Ti, Ta, W or Mo in the framework of acting as a thermal barrier between the W-based plasma-facing elements and the CuCrZr or Cu-based heat sink components of the fusion reactor. The alloys were produced by arc melting and their microstructure and mechanical properties were previously characterized by XRD, SEM, and Vickers hardness measurements. Thermal properties have been measured on as-cast at thermally treated alloys using the laser flash method in the temperature range 25 degrees C to 600 degrees C to determine the thermal diffusivity, alpha, thermal conductivity, lambda, and specific heat, C-p. Dilatometry experiments were also carried out to obtain the linear thermal expansion coefficient, CTE, as a function of temperature. For all materials, the thermal conductivity increases with temperature from 15 W/mK at RT to 28 W/mK at 600 degrees C and does not significantly depend on the thermal treatment for the Mo-HEA and W-HEA, but increases after aging for the Ta-HEA and Ti-HEA. These values are lower than those of W (similar to 122 W/mK at 600 degrees C) and much lower than for CuCrZr-IG (similar to 354 W/mK at 400 degrees C). The thermal expansion coefficients of these HEAs, similar to 10 x 10(-6) degrees C-1 at RT and similar to 2 x 10(-6) degrees C-1 at 650 degrees C are between those of CuCrZr and the W for the entire operative temperature range. These results indicate that the Cu5Cr35Fe35V20-X-5 (X = Ti, Ta, W, Mo) HEAs have a promising combination of the thermophysical properties, lambda, C-p and CTE, to act as thermal barrier in plasma-facing components that require the union of W- and Cu-based materials.

The synthesis of polycrystalline TiFe2Sn samples by a route including arc melting and spark plasma sintering with Hf, Y, and In substitutions at the Ti and Sn sites is investigated. For a reduced amount of substitution, around 2 at%, the samples are single phase, while for increased amounts, secondary phases segregate. As is characteristic of these compounds, the Fe-Ti atomic disorder generates a weak ferromagnetic ordering, which is also influenced by the type of substitutional atoms and the secondary phases in the samples with a higher Hf content. The Seebeck coefficient values show an increase for Ti0.98Hf0.02Fe2Sn and for samples with an adjusted Sn content, resulting in slightly increased power factor values. These values reach a maximum for Ti0.98Hf0.02Fe2Sn at approximately 300 K and for TiFe2Sn1.05 at approximately 325 K, namely, 2.69 x 10(-)(4) Wm(-1)K(-2) and 2.52 x 10(-)(4) Wm(-1)K(-2), respectively. The thermal conductivity of all the samples with substitutions increases with respect to the pristine sample. The highest figure of merit value of 0.016 is also obtained for Ti0.98Hf0.02Fe2Sn at 325 K.

This study investigates polycrystalline samples of TiFe2-xRexSn (with x = {0, 0.02, 0.04, 0.06, 0.2}) synthesized using conventional arc-melting and spark plasma sintering. Structural and morphological analysis shows that low Re substitutions result in good phase purity with minor traces of secondary phases, while higher Re content leads to the segregation of additional phases. The magnetism and electrical resistivity of the samples are affected by inherent Fe-Ti atomic disorder, with the effects of secondary phases becoming more prominent in the samples with higher Re content. The Seebeck coefficient values increase only for TiFe1.98Re0.02Sn, while the power factor increases for x = {0, 0.02, 0.04}, reaching maximal values for x = 0.02 at similar to 300 K and x = 0.04 at similar to 325 K, i.e., (2.22 +/- 0.2) x 10(-4) Wm(-1) K-2. The thermal conductivity of the samples increases with x, resulting in modest values of the figure of merit, with the maximum achieved for x = 0.02 at 325 K, i.e., 0.015 +/- 0.002. (c) The Author(s) 2024

Iron oxide nanoparticles were synthesized using a vortex microfluidic system and subsequently functionalized with a primary shell of salicylic acid, recognized for its ability to increase the stability and biocompatibility of coated materials. In the second stage, the vortex platform was placed in a magnetic field to facilitate the growth and development of a porous silica shell. The selected drug for this study was micafungin, an antifungal agent well regarded for its effectiveness in combating fungal infections and identified as a priority compound by the World Health Organization (WHO). The resulting nanocomposite system was characterized using various techniques, including Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), Brunauer-Emmett-Teller (BET) analysis, UV-Vis spectroscopy, and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). The synthesis method produced nanoparticles with dimensions of 5-7 nm, highlighting the advantages of the chosen approach. A desorption profile was established using a continuous-flow, UV-Vis analysis system, indicating that the bioactive compound was released slowly; after two hours, approximately 50% of the loaded micafungin was detected in the release medium. Furthermore, the results obtained from the FT-ICR MS analysis provided molecular-level confirmation, thereby supporting the release mechanism of micafungin from the nanosystem.

Nanocomposites based on Fe3O4 and carbonaceous nanoparticles (CNPs), including carbon nanotubes (CNTs) and graphene derivatives (graphene oxide (GO) and reduced graphene oxide (RGO)), such as Fe3O4@GO, Fe3O4@RGO, and Fe3O4@CNT, have demonstrated considerable potential in a number of health applications, including tissue regeneration and innovative cancer treatments such as hyperthermia (HT). This is due to their ability to transport drugs and generate localized heat under the influence of an alternating magnetic field on Fe3O4. Despite the promising potential of CNTs and graphene derivatives as drug delivery systems, their use in biological applications is hindered by challenges related to dispersion in physiological media and particle agglomeration. Hence, a solid foundation has been established for the integration of various synthesis techniques for these nanocomposites, with the wet co-precipitation method being the most prevalent. Moreover, the dimensions and morphology of the composite nanoparticles are directly correlated with the value of magnetic saturation, thus influencing the efficiency of the composite in drug delivery and other significant biomedical applications. The current demand for this type of material is related to the loading of a larger quantity of drugs within the hybrid structure of the carrier, with the objective of releasing this amount into the tumor cells. A second demand refers to the biocompatibility of the drug carrier and its capacity to permeate cell membranes, as well as the processes occurring within the drug carriers. The main objective of this paper is to review the synthesis methods used to prepare hybrids based on Fe3O4 and CNPs, such as GO, RGO, and CNTs, and to examinate their role in the formation of hybrid nanoparticles and the correlation between their morphology, the dimensions, and optical/magnetic properties.

We employ a "real-time" excitation scheme to calculate the excitation spectra of a two-dimensional electron system in a square array of quantum dots placed in a circular cylindrical far-infrared photon cavity subjected to a perpendicular homogeneous external magnetic field. The Coulomb interaction of the electrons is handled via spin density functional theory and the para- and the diamagnetic parts of the electron-photon coupling are updated according to a configuration interaction method in each iteration of the density functional calculation. The results show that an excitation scheme built on using the symmetry of the lateral square superlattice of the dots and the cylindrical cavity produces both para- and diamagnetic resonance peaks with oscillator strengths that can be steered by the excitation pulse parameters. The excitation method breaks the conditions for the generalized Kohn theorem and allows for insight into the subband structure of the electron system and can be used both inside and outside the linear response regime.

Carbon dioxide (CO2) is reversibly adsorbed and desorbed from ferroelectric (001) oriented, BaO-terminated barium titanate, as revealed in real time by high resolution and ultrafast photoelectron spectroscopy and certified by low energy electron diffraction. Desorption proceeds when the substrate is heated above its Curie temperature. The amount of CO2 adsorbed is derived to be between one molecule for a surface BaO unit cell (adsorption below room temperature) and one molecule for two unit cells (adsorption above room temperature). The molecule is bound with its carbon to surface oxygen, forming a CO3 structure. The BaTiO3(001) surface is unaffected by repeated cycles of adsorption-desorption. The relatively high amount of CO2 adsorbed and the stability of the substrate after repeated adsorption and desorption processes promotes barium titanate as a promising candidate for decarbonization technologies.

Interest in self-cleaning coatings is rising due to their potential to enhance comfort and quality of life in polluted urban environments, driving the search for materials with optimal physical properties. Convergent with this goal, this study investigates the wetting properties and photo-catalytic efficiency of reticulated TiO2 layers. It shows that these properties are significantly influenced by the topographical characteristics of the TiO2 surface, which can be precisely controlled through variations in pulverization pressure and low-temperature post-annealing treatments. Post-deposition annealing of the TiO2 layers achieves 100 % self-cleaning efficiency for both thick and thin films, with optical transmission ranging from approximately 60 %-80 % in the visible spectrum. Additionally, the TiO2 layers exhibited promising capabilities for eliminating pathogenic microorganisms and disinfecting surfaces. The underlying causal factors of these remarkable and technologically promising surface features are explored and discussed.

In this study, the Cu2Zn1-xCoxSnS4 (CZn1-xCoxTS) films with partial cation substitution of cobalt are synthetized by sol gel spin coating, followed by sulfurization treatment. The incorporation of cobalt cation in the CZTS crystalline lattice as well as the phase transition from kesterite to stannite were confirmed by the X-ray diffraction (XRD) and Raman spectroscopy data. The XRD pattern shows peak-shifting toward higher 2 theta by increasing the Co concentration, indicating a decrease in lattice parameters. The red shift of Raman peaks by increasing x from 0 to 0.6, confirms the phase transition. The CZn1-xCoxTS morphology was observed by scanning electron microscopy, showing large grain size as x increases and a good distribution of elements for all films. Xray photoelectron spectroscopy was employed to study the valence of cations/anions and to probe the chemical bonds. The optical band gap showed a parabolic behavior versus the molar ratio Co/(Co + Zn), this deviation from Vegard's law being induced by the difference in electronegativity between cobalt and zinc. The pure CZTS has a band gap of 1.47 eV, while for CZn0.6Co0.4TS the gap is 1.17 eV, which indicates that the incorporation of cobalt cation produces a red-shift of the band to band transition energy.