National Institute Of Materials Physics - Romania

Resveratrol (RES) is a naturally occurring product with numerous biological activities. Despite its potential benefits, its use is limited due to its low aqueous stability and solubility in its native form. The porous sol-gel silica materials which are able to entrap different organic molecules represent new studied release carriers. The aim of this work was to generate a solid matrix to encapsulate RES ensuring protection, increased solubility and release in solutions. A non-toxic ingredient, namely beta-cyclodextrin (beta-CD), able to form inclusion complexes (ICs) with RES has been used. Ecological formulations have been processed by entrapping the RES containing ICs in silica matrices obtained from a silica colloidal sol by the aqueous route of the sol-gel method. Characterization methods (DSC, FTIR, UV-Vis, fluorescence studies, SEM) have evidenced the presence of RES-beta-CD inclusion complex in the silica powder, RES stability in the matrix and its release in aqueous and organic solutions, and the morphology of the carrier. An evaluation of the antioxidant activity of RES in the present formulation was performed by the chemiluminescence assay and RES release profile in aqueous solutions was obtained by HPLC-MS. The resulted materials can find applications in different domains. Graphic abstract

Catalytic activity of TiO2, 2%Re-TiO2 and 10%Re-TiO2 in the conversion of carbohydrates into levulinic acid under autoclave conditions was evaluated. These materials were prepared by aerogel method, for the first time to the best of our knowledge, and characterized by XPS, SEM-EDX, DRIFTS, DR UV-vis, Raman, N-2 adsorption/desorption isotherms, TGA and XRD. Further, the surface acidity was probed by NH3-TPD and pyridine-FT-IR where it was observed that increasing the amount of rhenium doped into TiO2 led to an increase in the total number of acid sites (Lewis + Bronsted) but with an overall lower strength. The presence of both Bronsted and Lewis acid sites led to the hypothesis that these materials may be well suited for conversion of carbohydrates into levulinic acid. Indeed a levulinic acid yield of 57% was reached over 10%Re-TiO2 for a low mass ratio catalyst to glucose (1 : 5). Moreover, the 10%Re-TiO2 catalyst was reused in the conversion of glucose for four catalytic cycles without a significant loss of the catalytic activity.

A novel series of Cu(II) complexes with formula M(HLn)(ClO4)(2)center dot mH(2)O [HLn: 13-membered pentaazamacrocyclic ligand resulted from condensation ofN,N '-bis(2-aminoethyl)ethane-1,2-diamine,l-tyrosine (HL1)/l-tryptophan (HL2)/l-phenylalanine (HL3) and formaldehyde] were synthesized by one-pot method. Techniques such as ESI-MS, IR, UV-Vis and EPR spectroscopy provided data characterizing the complexes as mononuclear species. The course of thermal decomposition was followed using TG/DSC-MS analysis in air atmosphere. The TG curves showed a gradual decomposition in several stages that comprise dehydration, decomposition of perchlorate ions as well as fragmentation and oxidative degradation of the organic part. The intermediates formed after first stage of water elimination are stable on 40, 15 and 80 degrees C interval for complexes (1), (2) and (3), respectively. The compounds were tested on the eukaryotic unicellular organismSaccharomyces cerevisiae, showing variable actions in terms of toxicity, cellular uptake and capacity to alleviate growth defects associated with Cu, Zn-superoxide dismutase (SOD1) depletion.

The structural role of V in 28Li(2)O-72SiO(2) (in mol%) lithium silicate glass doped with 0.5 mol% V2O5 was assessed using Si-29 and V-51 Nuclear Magnetic Resonance (NMR), Fourier-transform infrared (FTIR), and X-ray photoelectron (XPS) spectroscopy techniques. Despite the low amount of V2O5 used, the structural information obtained or deduced from the statistical analysis of the NMR data could explain the evolution of glass properties after V2O5 addition. The XPS results indicated that all vanadium exists in 5+ oxidation state. Both the Si-29 NMR and FTIR data point toward an increase in the polymerization of the silicate network, caused by the V2O5 acting as network former, capable to form various QVn tetrahedral units (for n = 0, 1, and 2) in the glasses. These QVn units, which are similar to phosphate units, scavenge the Li+ ions and cause the silicate network to polymerize. However, in an overall balance, the entire glass network is depolymerized due to the additional nonbridging oxygens contributed by the vanadium polyhedra. The addition of vanadium causes the network to expand and increases the ionic conductivity.

The current increasing interest in portable biosensing platforms led to their development on flexible porous substrates, such as filter paper. As these devices rely on fluid transport under capillary action, without the use of an external force, studies of the diffusion process can provide useful data for optimizing their working capabilities. We present here the results obtained by experimentally studying the radial diffusion of various fluids. The diffusion in filter paper has been recorded for six fluids with different viscosity. For each of them, the displacement of the fluid front has been measured along eight radial directions and then we investigated the possibility of describing this diffusion process using Gillespie's model.

The paper presents the research results in the field of TiNiCu shape memory alloys processed by powder metallurgy techniques. The powders mixtures used to synthesize Ti50Ni30Cu20 alloys were obtained by blended constitutive elemental powders or by mechanical alloying of powder mixtures for 10 and 20 hours, respectively. Finally, a subsequent annealing process was carried out, followed by a rapid cooling in ice water. All experiments were performed under 99.9% argon atmosphere. At room temperature, the obtained materials contained monoclinic and orthorhombic martensite type. The structural and thermal investigation of these materials were discussed in view of the potential development of actuators.

Phase-change memories have reached an advanced degree of maturity, although, to be able to meet the increasing storage demand, multilevel capability is needed. A GeTe memristor is obtained in an amorphous state and it is subjected to a specific thermal treatment which initiates the transition toward the crystalline state. It is found that this crystalline state initialization process is highly beneficial for subsequently obtaining a large number of intermediate resistive states between the high and low resistive states. Multiple resistance levels are achieved by operating the devices in both DC sweeps and rectangular pulse modes in the low-voltage subthreshold regime. The conduction is modeled using a space charge limited conduction model, showing three distinct conduction regions in the high resistive state which merge toward a single conduction region as the low resistive state is approached. The obtained memristors can be used as multilevel nonvolatile memories or as synapses in neuromorphic computing.