Publications

This work reports the effect of the rapid solidification technique and thermal treatment on the martensitic transformation (MT), magnetic and magnetostrictive properties on the off-stoichiometric Ni49Mn31Ga20 and Ni51Mn28Ga21 ferromagnetic shape memory ribbons. The samples were investigated by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, magnetic and magnetostrictive measurements. The temperature dependence of the X-ray phases analysis shows the presence of martensite structures, both tetragonal and monoclinic, at room temperature and allowed to study their evolution through MT. The thermal treatment induces changes in the microstructure with implications in MT and Curie temperatures evolution. The competition between the magnetization orientation and twin boundary motion within martensitic variants under magnetic field evidenced in the magnetic-strain curves was discussed and correlated with the magnetic data.

Exchange coupling in a SrFe12O19 - Fe3O4 nanocomposite magnet was explored in this study. The composition, microstructure, local structure and magnetic properties were investigated by XRD, SEM, Mossbauer spectroscopy, and SQUID magnetometry. The magnetoplumbite SrFe12O19 and spinel Fe3O4 structures were verified by X-ray diffraction. The morphology of the composite reveals the characteristics of the two components. The hyperfine parameters allowed the identification of the Wyckoff positions of the iron ions corresponding to the involved phases. The magnetic measurements of the composite, showing a single-phase-like magnetic hysteresis loop, confirmed the exchange coupling between the hard and soft magnetic phases.

NiTi cylindrical materials were obtained by spark plasma sintering at 850??C or 900??C from high purity Ni and Ti powders. These mixtures were previously processed by mechanical alloying for 8 and 15 hours. In order to increase the alloy homogeneity, the NiTi materials were subjected to post aging treatment in protective atmosphere at constant temperature 400??C and cooling in water with ice. All samples were characterized by optical microscopy, differential calorimetry (DSC), X-ray measurements (XRD) and micro/nanoindentation measurements. The results demonstrate that the NiTi materials obtained by this preparation route have good mechanical properties and can serve as a quantitative reference for the microstructure design of shape memory materials for various applications, such as the biomedical ones.

A composite material with applications in optoelectronics has been investigated. Pulsed laser deposition CdSe-doped glass film was prepared by the combinatorial deposition from two targets, namely pure CdSe and glass belonging to the 20Li(2)O-10Al(2)O(3)-7BaO-2La(2)O(3)-2ZnO-59P(2)O(5)system. Exciton peaks in the Vis domain, related to electron-hole pairs transitions from the valence band to the conduction band, were revealed in the optical absorption spectra of the CdSe-doped film. CdSe quantum dots (QDs) band gap energy depends on the CdSe quantum confinement effect. CdSe-doped film photoluminescence exhibits peaks in the red domain assigned to CdSe transitions from the excited state to the ground state. The size of CdSe nanoclusters, determined from x-ray diffraction is correlated with scanning electron microscopy-energy dispersive x-ray spectroscopy and atomic force microscopy results. Vibration modes specific both to CdSe QDs and to the vitreous network have been evidenced by Fourier transform infrared and Raman spectroscopy.

Six compounds of the types [M(dmbg)(2)]center dot nH(2)O ((1) M: Ni, n = 0; (4) M: Cu, n = 1; Hdmbg: N,N '-dimethylbiguanide) and, respectively, [ML]center dot nH(2)O (where (2) M: Ni, L: L-1, n = 0; (3) M: Ni, L: L-2, n = 0; (5) M: Cu, L: L-1, n = 0 and (6) M: Cu, L: L-2, n = 3, H2L1: ligand resulted from the condensation of (1) with ammonia and formaldehyde and H2L2: ligand resulted from the condensation of (4) with hydrazine and formaldehyde) were characterized as mononuclear species through information provided by NMR, electronic paramagnetic resonance (EPR) and UV-Vis spectroscopy as well as cyclic voltammetry. All data are consistent with macrocyclic formation by condensation. The complexes adopt a distorted square planar geometry resulting from the chelating behaviour of the corresponding ligands. The EPR spectra recorded after the addition of Cu(II) complexes into the corresponding Ni(II) complexes show a well resolved hyperfine structure with the superhyperfine pattern corresponding to four nitrogen atom donors. The cathodically shift of E-pc2 for both series can be correlated with the increased stability of the M(I) species through macrocyclic ligands. Geometry optimization studies for complexes (2), (3), (5) and (6) have further confirmed the experimental data. The pharmacokinetic computational results indicate that the complexes exhibit medium to low intestinal absorption and slow blood-brain barrier permeability but low toxicity. Their predictive pharmacodynamic profiles show that the compounds present the ability to inhibit protease activity. By corroborating the results of the in silico analysis with the experimental ones, the most promising complexes for antimicrobial applications are (1) and (2) and, respectively, (4) and (6) for the development of novel antitumour strategies.

Lanthanum orthophosphate (LaPO4) and La0.95-xCe0.05MnxPO4 (x = 0.00, 0.03, 0.10) phosphors were synthesized by a simple and cost-efficient co-precipitation method and the formation of LaPO4 nanorods with a monoclinic P21/n crystal structure was observed. X-ray diffraction pattern analysis indicated a slight distortion of the LaPO4 crystalline structure and an increase of the lattice strain as a consequence of the Mn2+ and Ce3+ dopants incorporation in the host matrix. Scanning electron microscopy revealed that the microstructure of all powders consists of agglomerations of nanorods, which are around 17 +/- 3 nm in diameter and length ranging from 100 nm to 300 nm. Electron paramagnetic resonance measurements have indicated the presence of Mn2+ in isolated species, but also as agglomerates. Ce3+ and Mn2+ doping of LaPO4 resulted also in a decrease of the band gap up to 4.70 eV compared to the un-doped sample. Because of an energy transfer effect from Ce3+ to Mn2+ ions, green emission of Mn2+ ions at around 550 nm was observed upon 275 nm excitation.

The discovery of ferroelectricity in doped HfO2 represents an excellent opportunity to overcome the obstacles in manufacturing reliable ferroelectric field effect transistors (FeFET) for nonvolatile memory applications, considering that HfO2 is compatible with Si and Ge and it is already used in semiconductor industry. The presence of interface defects may have detrimental effects on the operation of FeFETs, so their role is systematically investigated in this study in correlation with the substrate doping. Metal-ferroelectric-semiconductor (MFS) structures are fabricated by depositing Hf0.5Zr0.5O2 (HZO) layers on n-type Ge substrate. Their electric properties are compared with those of MFS structures obtained by depositing HZO on p-type Ge, to study the influence of the doping. It is found that, although the ferroelectric properties of HZO are similar, the capacitance and impedance of the MFS structures behave differently. For n-Ge, the occupation probability of a large number of low-lying interface defect acceptor states, charges the interface negatively which adversely affects the C-V response of the MFS, albeit without harming the ferroelectric (P-V) hysteresis. Although the interface defects do not harm ferroelectricity, they could inhibit inversion in p-type Ge or accumulation in n-type Ge so they should be taken into account when designing Ge FeFET devices.

Resveratrol (RES) is a naturally occurring product with numerous biological activities. Despite its potential benefits, its use is limited due to its low aqueous stability and solubility in its native form. The porous sol-gel silica materials which are able to entrap different organic molecules represent new studied release carriers. The aim of this work was to generate a solid matrix to encapsulate RES ensuring protection, increased solubility and release in solutions. A non-toxic ingredient, namely beta-cyclodextrin (beta-CD), able to form inclusion complexes (ICs) with RES has been used. Ecological formulations have been processed by entrapping the RES containing ICs in silica matrices obtained from a silica colloidal sol by the aqueous route of the sol-gel method. Characterization methods (DSC, FTIR, UV-Vis, fluorescence studies, SEM) have evidenced the presence of RES-beta-CD inclusion complex in the silica powder, RES stability in the matrix and its release in aqueous and organic solutions, and the morphology of the carrier. An evaluation of the antioxidant activity of RES in the present formulation was performed by the chemiluminescence assay and RES release profile in aqueous solutions was obtained by HPLC-MS. The resulted materials can find applications in different domains. Graphic abstract

Catalytic activity of TiO2, 2%Re-TiO2 and 10%Re-TiO2 in the conversion of carbohydrates into levulinic acid under autoclave conditions was evaluated. These materials were prepared by aerogel method, for the first time to the best of our knowledge, and characterized by XPS, SEM-EDX, DRIFTS, DR UV-vis, Raman, N-2 adsorption/desorption isotherms, TGA and XRD. Further, the surface acidity was probed by NH3-TPD and pyridine-FT-IR where it was observed that increasing the amount of rhenium doped into TiO2 led to an increase in the total number of acid sites (Lewis + Bronsted) but with an overall lower strength. The presence of both Bronsted and Lewis acid sites led to the hypothesis that these materials may be well suited for conversion of carbohydrates into levulinic acid. Indeed a levulinic acid yield of 57% was reached over 10%Re-TiO2 for a low mass ratio catalyst to glucose (1 : 5). Moreover, the 10%Re-TiO2 catalyst was reused in the conversion of glucose for four catalytic cycles without a significant loss of the catalytic activity.