National Institute Of Materials Physics - Romania

Publications

Year:

5410 articles found

1. Effects of mechanochemical activation on the structural, magnetic and optical properties of yttrium iron garnet-graphene nanoparticles

Authors: Glasser, S; Tolea, F; Craig, AJ; Sofronie, M; Aitken, JA; Sorescu, M

Published: FEB 1 2023, PHYSICA B-CONDENSED MATTER, 650, 414501, DOI: 10.1016/j.physb.2022.414501

Yttrium iron garnet nanoparticles were exposed to mechanochemical activation by high-energy ball milling for 0, 2, 4, 8 and 12 h, with and without graphene nanoparticles. The samples were subsequently characterized by Mo center dot ssbauer spectroscopy, X-ray powder diffraction (XRPD), magnetic measurements and optical diffuse reflec-tance spectroscopy. Examination of the quadrupole doublet's abundance as function of ball milling time indi-cated that graphene slowed down the precipitation of the yttrium iron perovskite (yttrium orthoferrite) phase. The increased linewidth of the doublet showed that the carbon from graphene preferentially entered the lattice of the yttrium orthoferrite. The saturation magnetization decreased with decreasing particle size for prolonged milling due to the occurrence of the antiferromagnetic hematite phase. The enhanced absorption in the infrared region could be associated with the incorporation of carbon from graphene in the lattice of the yttrium ortho-ferrite. The results are interesting for sensing and microwave applications.

2. Synthetic peptide array on gold for the electrochemical assessment of the 20S proteasome activity and effect of inhibitory compounds

Authors: Barsan, MM; Serban, A; Onea, M; Wysocka, M; Lesner, A; Diculescu, VC

Published: FEB 1 2023, APPLIED SURFACE SCIENCE, 610, 155620, DOI: 10.1016/j.apsusc.2022.155620

A sensor for the enzymatic activity and inhibition of the 20S proteasome was developed by immobilizing the synthetic peptide ABZ-VVSYAMG-(O2Oc)2-OH at Au electrodes. The detection principle is based on the elec-troactivity of ABZ, part of the ABZ-VVSY-OH moiety released from the peptide upon 20S proteasome chymo-trypsin action. The peptide was immobilized on a para-amino thiophenol (PATP) self-assembled monolayer on Au electrode by cross-linking its amino group to the -(O2Oc)2-OH moiety of the peptide (Au/PATP/peptide). The immobilization of the peptide and its interaction with 20S proteasome was investigated by SEM, QCM, SPR, ATR-FTIR and electrochemistry. The activity of 20S proteasome was assessed electrochemically by cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) after the immersion Au/PATP/peptide in 20S proteasome solution. CV study showed a decrease in both capacitive and faradaic currents corresponding to the ABZ-VVSY-OH removal, allowing the quantification of the 20S proteasome activity. The EIS study revealed that the resis-tance corresponding to charge transfer reactions at the peptide/solution interface correlated to the ABZ redox reaction, decreased linearly with increasing the incubation time in 20S proteasome solution. The perfected assay was applied for the investigation of the inhibitory effect of one synthetic, bortezomib, and two naturally occurring, epoxomicin, and lactacystin inhibitors.

3. Novel cells integrated biosensor based on superoxide dismutase on electrospun fiber scaffolds for the electrochemical screening of cellular stress

Authors: Sanz, CG; Aldea, A; Oprea, D; Onea, M; Enache, AT; Barsan, MM

Published: JAN 15 2023, BIOSENSORS & BIOELECTRONICS, 220, 114858, DOI: 10.1016/j.bios.2022.114858

A novel electrochemical biosensor was developed to monitor fibroblast cells stress levels for the first time in situ under external stimuli based on the recognition of superoxide anion released upon cell damage. The biosensor comprised metallized polycaprolactone electrospun fibers covered with zinc oxide for improved cell adhesion and signal transduction, whilst stable bioconjugates of mercaptobenzoic acid-functionalized gold nanoparticles/ superoxide dismutase were employed as recognition bioelements. Biosensors were first tested and optimized for in situ generated superoxide detection by fixed potential amperometry at +0.3 V, with minimal interferences from electroactive species in cell culture media. L929 fibroblast cells were then implanted on the optimized biosensor surface and the biosensor morphologically characterized by scanning electron microscopy (SEM) and fluorescence microscopy, which illustrated the network-type pattern of fibroblasts adjacent to the fiber scaffold. Fibroblast stress was induced by zymosan and monitored at the cells integrated biosensor using fixed potential amperometry (CA) with a sensitivity of 26 nA cm-2 mu g mL-1 zymosan and electrochemical impedance spectros-copy (EIS), with similar sensitivity of the biosensor considering the Rs and Z' parameters of around 0.13 omega cm2 mu g-1 mL and high correlation factors R2 of 0.9994. The obtained results underline the applicability of the here developed biosensor for the electrochemical screening of the fibroblast cells stress. The concept in using low-cost biocompatible polymeric fibers as versatile scaffolds for both enzyme immobilization and cell adhesion, opens a new path in developing biosensors for the in-situ investigation of a variety of cellular events.

4. Microscopic mechanism of ferroelectric properties in barium hexaferrites

Authors: Turchenko, V; Bondyakov, AS; Trukhanov, S; Fina, I; Korovushkin, VV; Balasoiu, M; Polosan, S; Bozzo, B; Lupu, N; Trukhanov, A

Published: JAN 10 2023, JOURNAL OF ALLOYS AND COMPOUNDS, 931, 167433, DOI: 10.1016/j.jallcom.2022.167433

The microscopic mechanism of the occurrence of ferroelectric properties in M-type barium hexaferrites is investigated by experimental and first-principle computation methods. The analysis of magnetic, X-ray, and Mossbauer measurements of BaFe12O19 samples ascertains the correlation between the thermal factor in the process of annealing samples and their functional properties. The occurrence of the remnant polarization in barium hexaferrites at room temperature contradicts the description of their crystal structure in the fra-mework of centrosymmetric space group P63/mmc (No. 194), in which one of the symmetry operations is inversion center. Therefore, the crystal structure of BaFe12O19 was analyzed in the frameworks of SG P63/mmc (No. 194) and non-centrosymmetric SG P63mc (No. 186). The computed value of polarization for a non-centrosymmetric unit cell is similar to 3.5 mu C/cm2. The analysis of polarization was carried out on a path connecting the polar P63mc and non-polar P63/mmc structures and considered in terms of the total energy barrier. Our result allows ascertaining a direct relationship between the remnant polarization of the unit cell and the broken spatial-inversion symmetry in the crystal structure of M-type barium hexaferrite.(c) 2022 Elsevier B.V. All rights reserved.

5. Multifunctional Magnetic Nanocomposites: Innovative Processing and Applications

Authors: Kuncser, V

Published: JAN 2023, NANOMATERIALS, 13, 206, DOI: 10.3390/nano13010206

Multifunctional magnetic nanocomposites are among those heterogeneous nanosized systems where at least one phase component is magnetic and can act as an intermediate of either the actuation or the response of the overall system. The main advantage of heterogeneous nanosystems is the possibility of combining and inter-influencing the electronic properties of constituent interfaced nanophases. Consequently, unique physico-chemical properties of the hybrid materials of interest in various applications can be obtained. This Special Issue of Nanomaterials highlights the most advanced processing and characterization tools of some multifunctional magnetic nanocomposites and heterogeneous systems of interest in various applications, from biomedicine to sensoristics and energy-saving materials.

6. Kinetics and the Effect of Thermal Treatments on the Martensitic Transformation and Magnetic Properties in Ni49Mn32Ga19 Ferromagnetic Shape Memory Ribbons

Authors: Tolea, F; Popescu, B; Bartha, C; Enculescu, M; Tolea, M; Sofronie, M

Published: JAN 2023, MAGNETOCHEMISTRY, 9, 7, DOI: 10.3390/magnetochemistry9010007

In our work, the kinetics of martensitic transformations and the influence of thermal treatments on martensitic transformations, as well as the related magnetic properties of the Ni49Mn32Ga19 ferromagnetic shape memory melt-spun ribbons, have been investigated. Thermal treatments at 673 K for 1, 4 and 8 h can be considered an instrument for fine-tuning the performance parameters of alloys. One-hour thermal treatments promote an improvement in the crystallinity of these otherwise highly textured ribbons, reducing internal defects and stress induced by the melt-spinning technique. Longer thermal treatments induce an important magnetization rise concomitantly with a slight and continuous increase in martensitic temperatures and transformation enthalpy. The activation energy, evaluated from differential scanning calorimeter experimental data with a Friedman model, significantly increases after thermal treatments as a result of the multi-phase coexistence and stabilization of the non-modulated martensitic phase, which increases the reverse martensitic transformation hindrance.

7. Cu2SnSe3 phase formation from different metallic and binary chalcogenides stacks using magnetron sputtering

Authors: Zaki, MY; Sava, F; Simandan, ID; Buruiana, AT; Mihai, C; Velea, A; Galca, AC

Published: JAN 2023, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 153, 107195, DOI: 10.1016/j.mssp.2022.107195

Cu2SnSe3 (CTSe) is a polyvalent material that can be used as an absorber layer for thin film solar cells or as a starting layer for the synthesis of CZTSe or CZTSSe compounds. Obtaining CTSe single phase films with opti-mized properties for thin film solar cells is a difficult task. A systematic study using both metallic and binary chalcogenides precursors for the formation of the CTSe phase was not performed. The films consisting of four different stacks (Sn\Cu, SnSe2\Cu, Sn\Cu2Se, and SnSe2\Cu2Se) were prepared by magnetron sputtering on soda lime glass (SLG) and molybdenum (Mo) coated SLG substrates, followed by annealing at 550 degrees C under Sn + Se atmosphere. X-ray diffraction and Raman spectroscopy results indicated the formation of a single CTSe phase in most of the stacks deposited on both substrates. Scanning electron microscopy images showed compact surfaces with large grains in the films deposited on Mo substrate, while the films on SLG have more voids on their sur-faces. The elemental analysis measured by energy dispersive spectroscopy revealed stoichiometric films on Mo, and copper and tin rich compositions on SLG substrates. The band gap values inferred by conventional spec-troscopy are between 0.81 and 1.95 eV. It was found that the SnSe2\Cu and Sn\Cu2Se stacks are preferred for the formation of a single CTSe phase, with dense surface morphology, a stoichiometric composition, and an optimal absorber layer band gap. This study opens the way to comprehend the formation reactions during the seleni-zation of metallic and binary chalcogenides precursors towards the optimization of kesterite absorber for photovoltaic device fabrication.

8. Paving the Way to the Fuel of the Future-Nanostructured Complex Hydrides

Authors: Comanescu, C

Published: JAN 2023, INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 24, 143, DOI: 10.3390/ijms24010143

Hydrides have emerged as strong candidates for energy storage applications and their study has attracted wide interest in both the academic and industry sectors. With clear advantages due to the solid-state storage of hydrogen, hydrides and in particular complex hydrides have the ability to tackle environmental pollution by offering the alternative of a clean energy source: hydrogen. However, several drawbacks have detracted this material from going mainstream, and some of these shortcomings have been addressed by nanostructuring/nanoconfinement strategies. With the enhancement of thermodynamic and/or kinetic behavior, nanosized complex hydrides (borohydrides and alanates) have recently conquered new estate in the hydrogen storage field. The current review aims to present the most recent results, many of which illustrate the feasibility of using complex hydrides for the generation of molecular hydrogen in conditions suitable for vehicular and stationary applications. Nanostructuring strategies, either in the pristine or nanoconfined state, coupled with a proper catalyst and the choice of host material can potentially yield a robust nanocomposite to reliably produce H-2 in a reversible manner. The key element to tackle for current and future research efforts remains the reproducible means to store H-2, which will build up towards a viable hydrogen economy goal. The most recent trends and future prospects will be presented herein.

9. Up-Conversion Luminescence and Magnetic Properties of Multifunctional Er3+/Yb3+-Doped SiO2-GdF3/LiGdF4 Glass Ceramics

Authors: Secu, C; Bartha, C; Radu, C; Secu, M

Published: JAN 2023, MAGNETOCHEMISTRY, 9, 11, DOI: 10.3390/magnetochemistry9010011

Glassy nanocomposites containing Yb3+/Er3+-doped GdF3 and LiGdF4 nanocrystals have been prepared by controlled crystallization of the xerogel and the structural, up-conversion luminescence, and magnetic properties were analyzed and discussed. Structural and morphological analysis showed uniform distribution of both GdF3 and LiGdF4 nanocrystals (tens of nm size), embedded in silica glass matrix as the result of thermal decomposition of the trifluoracetates, revealed as a strong exothermic peak at about 300 degrees C; the Li-ions co-doping showed a strong influence on the GdF3 and LiGdF4 nanocrystalline fraction. The energy dispersive spectrometry mapping showed Gd, F and Yb, Er within the nanocrystals but not in the silica glass matrix. X-ray diffraction pattern analysis indicated the crystalline lattice distortion consistent with the Yb/Er incorporation in both fluoride nanocrystals. The "green" ((H-2(11/2), S-4(3/2)) -> I-4(15/2)) and "red" (F-4(9/2)-> I-4(15/2)) up-conversion luminescences at 525, 545, and 660 nm observed under 980 nm laser light pumping were assigned to the Er3+ ions deexcitation through a two-photon process. The magnetic properties of the nanocomposite are strongly temperature dependent. The magnetization hysteresis loops show a ferromagnetic behavior at low temperatures (5K) related to the rare-earth ions contribution and the saturation magnetization of 39 emu/g. At 300 K a paramagnetic behavior was observed that was ascribed to the non-interacting localized nature of the magnetic moment of the rare-earth ions. Hence, such novel, multifunctional magnetic and optical materials can allow the intertwining between magnetism and photonics and might offer new opportunities for new magneto-optical device development.

10. Functionalization of Graphene Derivatives with Conducting Polymers and Their Applications in Uric Acid Detection

Authors: Vaduva, M; Baibarac, M; Cramariuc, O

Published: JAN 2023, MOLECULES, 28, 135, DOI: 10.3390/molecules28010135

In this article, we review recent progress concerning the development of sensorial platforms based on graphene derivatives and conducting polymers (CPs), alternatively deposited or co-deposited on the working electrode (usually a glassy carbon electrode; GCE) using a simple potentiostatic method (often cyclic voltammetry; CV), possibly followed by the deposition of metallic nanoparticles (NPs) on the electrode surface (ES). These materials have been successfully used to detect an extended range of biomolecules of clinical interest, such as uric acid (UA), dopamine (DA), ascorbic acid (AA), adenine, guanine, and others. The most common method is electrochemical synthesis. In the composites, which are often combined with metallic NPs, the interaction between the graphene derivatives-including graphene oxide (GO), reduced graphene oxide (RGO), or graphene quantum dots (GQDs)-and the CPs is usually governed by non-covalent functionalization through pi-pi interactions, hydrogen bonds, and van der Waals (VW) forces. The functionalization of GO, RGO, or GQDs with CPs has been shown to speed up electron transfer during the oxidation process, thus improving the electrochemical response of the resulting sensor. The oxidation mechanism behind the electrochemical response of the sensor seems to involve a partial charge transfer (CT) from the analytes to graphene derivatives, due to the overlapping of pi orbitals.