NIMP| Andreea COSTAS, Author at NIMP

Projects

1. Core-shell nanowires based on TiO2 and CuO for optoelectronic device applications

Project Type: PD, Start Date: 2020-09-01 End Date: 2022-08-31

Publications

1. MAPLE-Deposited Perylene Diimide Derivative Based Layers for Optoelectronic Applications

Authors: Breazu, C; Girtan, M; Stanculescu, A; Preda, N; Rasoga, O; Costas, A; Catargiu, AM; Socol, G; Stochioiu, A; Popescu-Pelin, G; Iftimie, S; Petre, G; Socol, M

Published: NOV 2024, NANOMATERIALS, 14, 1733, DOI: 10.3390/nano14211733

Nowadays, the development of devices based on organic materials is an interesting research challenge. The performance of such devices is strongly influenced by material selection, material properties, design, and the manufacturing process. Usually, buckminsterfullerene (C60) is employed as electron transport material in organic photovoltaic (OPV) devices due to its high mobility. However, considering its low solubility, there have been many attempts to replace it with more soluble non-fullerene compounds. In this study, bulk heterojunction thin films with various compositions of zinc phthalocyanine (ZnPc), a perylene diimide derivative, or C60 were prepared by matrix-assisted pulsed laser evaporation (MAPLE) technique to assess the influence of C60 replacement on fabricated heterostructure properties. The investigations revealed that the optical features and the electrical parameters of the organic heterostructures based on this perylene diimide derivative used as an organic acceptor were improved. An increase in the JSC value (4.3 x 10-4 A/cm2) was obtained for the structures where the perylene diimide derivative acceptor entirely replaced C60 compared to the JSC value (7.5 x 10-8 A/cm2) for the heterostructure fabricated only with fullerene. These results are encouraging, demonstrating the potential of non-fullerene compounds as electron transport material in OPV devices.

2. Bio-Entities Based on Albumin Nanoparticles and Biomimetic Cell Membranes: Design, Characterization and Biophysical Evaluation

Authors: Barbinta-Patrascu, ME; Iftimie, S; Cazacu, N; Stan, DL; Costas, A; Balan, AE; Chilom, CG

Published: APR 2023, COATINGS, 13, 671, DOI: 10.3390/coatings13040671

Protein-based particles are one of the most important research topics in nanomedicine, being used especially as drug delivery systems. From the wide variety of proteins, albumins offer several advantages in biomedical applications due to their special properties. Albumin nanoparticles play an important role as carriers in the drug delivery of chemical and biomolecular drugs, such as anticancer drugs; offer many advantages, such as biocompatibility and biodegradability; and are well-tolerated, without any side effects. In this work, various types of bovine serum albumin nanoparticles (BSA NPs), with or without ascorbic acid or glucose, were prepared via different nanoprecipitation methods. The obtained BSA NPs were characterized by UV-Vis absorption spectroscopy. Their size and morphology were studied by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The stability in time of the developed BSA NPs was spectrally monitored. Three types of bio-entities containing BSA NPs and chlorophyll-labeled artificial cell membranes were "green" developed. The designed biohybrids were characterized by UV-Vis absorption and fluorescence emission spectroscopy, and their three-dimensional topography was investigated by AFM. Both the size and shape of the developed bio-entities were monitored through SEM analysis. These results could be exploited in the development of novel drug carrier systems or as bio-coatings to be used in the biomedical field.

3. Silver nanoparticles decorated ZnO-CuO core-shell nanowire arrays with low water adhesion and high antibacterial activity

Authors: Costas, A; Preda, N; Zgura, I; Kuncser, A; Apostol, N; Curutiu, C; Enculescu, I

Published: JUL 3 2023, SCIENTIFIC REPORTS, 13, 10698, DOI: 10.1038/s41598-023-37953-w

Nanostructured surfaces based on silver nanoparticles decorated ZnO-CuO core-shell nanowire arrays, which can assure protection against various environmental factors such as water and bacteria were developed by combining dry preparation techniques namely thermal oxidation in air, radio frequency (RF) magnetron sputtering and thermal vacuum evaporation. Thus, high-aspect-ratio ZnO nanowire arrays were grown directly on zinc foils by thermal oxidation in air. Further ZnO nanowires were coated with a CuO layer by RF magnetron sputtering, the obtained ZnO-CuO core-shell nanowires being decorated with Ag nanoparticles by thermal vacuum evaporation. The prepared samples were comprehensively assessed from morphological, compositional, structural, optical, surface chemistry, wetting and antibacterial activity point of view. The wettability studies show that native Zn foil and ZnO nanowire arrays grown on it are featured by a high water droplet adhesion while ZnO-CuO core-shell nanowire arrays (before and after decoration with Ag nanoparticles) reveal a low water droplet adhesion. The antibacterial tests carried on Escherichia coli (a Gram-negative bacterium) and Staphylococcus aureus (a Gram-positive bacterium) emphasize that the nanostructured surfaces based on nanowire arrays present excellent antibacterial activity against both type of bacteria. This study proves that functional surfaces obtained by relatively simple and highly reproducible preparation techniques that can be easily scaled to large area are very attractive in the field of water repellent coatings with enhanced antibacterial function.

4. Macrocyclic Compounds: Metal Oxide Particles Nanocomposite Thin Films Deposited by MAPLE

Authors: Socol, M; Preda, N; Breazu, C; Costas, A; Rasoga, O; Petre, G; Popescu-Pelin, G; Iftimie, S; Stochioiu, A; Socol, G; Stanculescu, A

Published: MAR 2023, MATERIALS, 16, 2480, DOI: 10.3390/ma16062480

Nanocomposite films based on macrocyclic compounds (zinc phthalocyanine (ZnPc) and 5,10,15,20-tetra(4-pyridyl) 21H,23H-porphyrin (TPyP)) and metal oxide nanoparticles (ZnO or CuO) were deposited by matrix-assisted pulsed laser evaporation (MAPLE). 1,4-dioxane was used as a solvent in the preparation of MAPLE targets that favor the deposition of films with a low roughness, which is a key feature for their integration in structures for optoelectronic applications. The influence of the addition of ZnO nanoparticles (similar to 20 nm in size) or CuO nanoparticles (similar to 5 nm in size) in the ZnPc:TPyP mixture and the impact of the added metal oxide amount on the properties of the obtained composite films were evaluated in comparison to a reference layer based only on an organic blend. Thus, in the case of nanocomposite films, the vibrational fingerprints of both organic compounds were identified in the infrared spectra, their specific strong absorption bands were observed in the UV-Vis spectra, and a quenching of the TPyP emission band was visible in the photoluminescence spectra. The morphological analysis evidenced agglomerated particles on the composite film surface, but their presence has no significant impact on the roughness of the MAPLE deposited layers. The current density-voltage (J-V) characteristics of the structures based on the nanocomposite films deposited by MAPLE revealed the critical role played by the layer composition and component ratio, an improvement in the electrical parameters values being achieved only for the films with a certain type and optimum amount of metal oxide nanoparticles.

5. Self-connected CuO-ZnO radial core-shell heterojunction nanowire arrays grown on interdigitated electrodes for visible-light photodetectors

Authors: Costas, A; Florica, C; Preda, N; Besleaga, C; Kuncser, A; Enculescu, I

Published: APR 27 2022, SCIENTIFIC REPORTS, 12, 6834, DOI: 10.1038/s41598-022-10879-5

An original photodetector system based on self-connected CuO-ZnO radial core-shell heterojunction nanowire arrays grown on metallic interdigitated electrodes, operating as visible-light photodetector was developed by combining simple preparation approaches. Metallic interdigitated electrodes were fabricated on Si/SiO2 substrates using a conventional photolithography process. Subsequently, a Cu layer was electrodeposited on top of the metallic interdigitated electrodes. The CuO nanowire arrays (core) were obtained by thermal oxidation in air of the Cu layer. Afterwards, a ZnO thin film (shell) was deposited by RF magnetron sputtering covering the surface of the CuO nanowires. The morphological, structural, compositional, optical, electrical and photoelectrical properties of the CuO nanowire arrays and CuO-ZnO core-shell nanowire arrays grown on metallic interdigitated electrodes were investigated. The performances of the devices were evaluated by assessing the figures of merit of the photodetectors based on self-connected CuO-ZnO core-shell heterojunction nanowire arrays grown on the metallic interdigitated electrodes. The radial p-n heterojunction formed between CuO and ZnO generates a type II band alignment that favors an efficient charge separation of photogenerated electron-hole pairs at the CuO-ZnO interface, suppressing their recombination and consequently enhancing the photoresponse and the photoresponsivity of the photodetectors. The electrical connections in the fabricated photodetector devices are made without any additional complex and time-consuming lithographic step through a self-connecting approach for CuO-ZnO core-shell heterojunction nanowire arrays grown directly onto the Ti/Pt metallic interdigitated electrodes. Therefore, the present study provides an accessible path for employing low dimensional complex structures in functional optoelectronic devices such as photodetectors.

6. Hierarchical Flax Fibers by ZnO Electroless Deposition: Tailoring the Natural Fibers/Synthetic Matrix Interphase in Composites

Authors: Preda, N; Costas, A; Sbardella, F; Seghini, MC; Touchard, F; Chocinski-Arnault, L; Tirillo, J; Sarasini, F

Published: AUG 2022, NANOMATERIALS, 12, 2765, DOI: 10.3390/nano12162765

Hierarchical functionalization of flax fibers with ZnO nanostructures was achieved by electroless deposition to improve the interfacial adhesion between the natural fibers and synthetic matrix in composite materials. The structural, morphological, thermal and wetting properties of the pristine and ZnO-coated flax fibers were investigated. Thus, the ZnO-coated flax fabric discloses an apparent contact angle of similar to 140 degrees immediately after the placement of a water droplet on its surface. An assessment of the interfacial adhesion at the yarn scale was also carried out on the flax yarns coated with ZnO nanostructures. Thus, after the ZnO functionalization process, no significant degradation of the tensile properties of the flax yarns occurs. Furthermore, the single yarn fragmentation tests revealed a notable increase in the interfacial adhesion with an epoxy matrix, reductions of 36% and 9% in debonding and critical length values being measured compared to those of the pristine flax yarns, respectively. The analysis of the fracture morphology by scanning electron microscopy and X-ray microtomography highlighted the positive role of ZnO nanostructures in restraining debonding phenomena at the flax fibers/epoxyresin matrix interphase.

7. Functionalization of basalt fibers with ZnO nanostructures by electroless deposition for improving the interfacial adhesion of basalt fibers/epoxy resin composites

Authors: Preda, N; Costas, A; Lilli, M; Sbardella, F; Scheffler, C; Tirillo, J; Sarasini, F

Published: OCT 2021, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 149, DOI: 10.1016/j.compositesa.2021.106488

Basalt fibers were functionalized by ZnO electroless deposition for obtaining a nanostructured interphase for enhancing the interfacial strength with an epoxy resin matrix. The structural, morphological and wetting properties of the pristine basalt fabrics and ZnO-coated basalt fabrics were evaluated. The fabrics were uniformly coated with ZnO nanostructures featuring a wurtzite structure and a twin hexagonal prism morphology. The contact angle measurements revealed that ZnO prisms transformed the hydrophilic basalt fabric into a hydrophobic one (similar to 130 degrees). ZnOs were also grown on the basalt fibers as yarns to evaluate their interfacial adhesion by single fiber pull-out tests. The results emphasize significant improvement in the apparent interfacial shear strength (similar to 42%) with limited degradation of the pristine basalt fiber tensile strength (a reduction of similar to 17%). Therefore, ZnO electroless deposition can be regarded as an effective mute to improve the mechanical performance of basalt/epoxy composites expanding their potential range of applications as structural materials.

8. Fabrication of ZnO and TiO2 Nanotubes via Flexible Electro-Spun Nanofibers for Photocatalytic Applications

Authors: Enculescu, M; Costas, A; Evanghelidis, A; Enculescu, I

Published: MAY 2021, NANOMATERIALS, 11, DOI: 10.3390/nano11051305

Web-like architectures of ZnO and TiO2 nanotubes were fabricated based on a three-step process of templating polymer nanofibers produced by electrospinning (step 1). The electrospun polymer nanofibers were covered by radio-frequency magnetron sputtering with thin layers of semiconducting materials (step 2), with FESEM observations proving uniform deposits over their entire surface. ZnO or TiO2 nanotubes were obtained by subsequent calcination (step 3). XRD measurements proved that the nanotubes were of a single crystalline phase (wurtzite for ZnO and anatase for TiO2) and that no other crystalline phases appeared. No other elements were present in the composition of the nanotubes, confirmed by EDX measurements. Reflectance spectra and Tauc plots of Kubelka-Munk functions revealed that the band gaps of the nanotubes were lower than those of the bulk materials (3.05 eV for ZnO and 3.16 eV for TiO2). Photocatalytic performances for the degradation of Rhodamine B showed a large degradation efficiency, even for small quantities of nanotubes (0.5 mg/10 mL dye solution): similar to 55% for ZnO, and similar to 95% for TiO2.

9. Nucleobases thin films deposited on nanostructured transparent conductive electrodes for optoelectronic applications

Authors: Breazu, C; Socol, M; Preda, N; Rasoga, O; Costas, A; Socol, G; Petre, G; Stanculescu, A

Published: APR 6 2021, SCIENTIFIC REPORTS, 11, DOI: 10.1038/s41598-021-87181-3

Environmentally-friendly bio-organic materials have become the centre of recent developments in organic electronics, while a suitable interfacial modification is a prerequisite for future applications. In the context of researches on low cost and biodegradable resource for optoelectronics applications, the influence of a 2D nanostructured transparent conductive electrode on the morphological, structural, optical and electrical properties of nucleobases (adenine, guanine, cytosine, thymine and uracil) thin films obtained by thermal evaporation was analysed. The 2D array of nanostructures has been developed in a polymeric layer on glass substrate using a high throughput and low cost technique, UV-Nanoimprint Lithography. The indium tin oxide electrode was grown on both nanostructured and flat substrate and the properties of the heterostructures built on these two types of electrodes were analysed by comparison. We report that the organic-electrode interface modification by nano-patterning affects both the optical (transmission and emission) properties by multiple reflections on the walls of nanostructures and the electrical properties by the effect on the organic/electrode contact area and charge carrier pathway through electrodes. These results encourage the potential application of the nucleobases thin films deposited on nanostructured conductive electrode in green optoelectronic devices.

10. Photodetecting properties of single CuO-ZnO core-shell nanowires with p-n radial heterojunction

Authors: Costas, A; Florica, C; Preda, N; Kuncser, A; Enculescu, I

Published: OCT 29 2020, SCIENTIFIC REPORTS, 10, DOI: 10.1038/s41598-020-74963-4

CuO-ZnO core-shell radial heterojunction nanowire arrays were obtained by a simple route which implies two cost-effective methods: thermal oxidation in air for preparing CuO nanowire arrays, acting as a p-type core and RF magnetron sputtering for coating the surface of the CuO nanowires with a ZnO thin film, acting as a n-type shell. The morphological, structural, optical and compositional properties of the CuO-ZnO core-shell nanowire arrays were investigated. In order to analyse the electrical and photoelectrical properties of the metal oxide nanowires, single CuO and CuO-ZnO core-shell nanowires were contacted by employing electron beam lithography (EBL) and focused ion beam induced deposition (FIBID). The photoelectrical properties emphasize that the p-n radial heterojunction diodes based on single CuO-ZnO core-shell nanowires behave as photodetectors, evidencing a time-depending photoresponse under illumination at 520 nm and 405 nm wavelengths. The performance of the photodetector device was evaluated by assessing its key parameters: responsivity, external quantum efficiency and detectivity. The results highlighted that the obtained CuO-ZnO core-shell nanowires are emerging as potential building blocks for a next generation of photodetector devices.

11. Functionalization of eggshell membranes with CuO-ZnO based p-n junctions for visible light induced antibacterial activity against Escherichia coli

Authors: Preda, N; Costas, A; Beregoi, M; Apostol, N; Kuncser, A; Curutiu, C; Iordache, F; Enculescu, I

Published: DEC 1 2020, SCIENTIFIC REPORTS, 10, DOI: 10.1038/s41598-020-78005-x

Biopolymers provide versatile platforms for designing naturally-derived wound care dressings through eco-friendly pathways. Eggshell membrane (ESM), a widely available, biocompatible biopolymer based structure features a unique 3D porous interwoven fibrous protein network. The ESM was functionalized with inorganic compounds (Ag, ZnO, CuO used either separately or combined) using a straightforward deposition technique namely radio frequency magnetron sputtering. The functionalized ESMs were characterized from morphological, structural, compositional, surface chemistry, optical, cytotoxicity and antibacterial point of view. It was emphasized that functionalization with a combination of metal oxides and exposure to visible light results in a highly efficient antibacterial activity against Escherichia coli when compared to the activity of individual metal oxide components. It is assumed that this is possible due to the fact that an axial p-n junction is created by joining the two metal oxides. This structure separates into components the charge carrier pairs promoted by visible light irradiation that further can influence the generation of reactive oxygen species which ultimately are responsible for the bactericide effect. This study proves that, by employing inexpensive and environmentally friendly materials (ESM and metal oxides) and fabrication techniques (radio frequency magnetron sputtering), affordable antibacterial materials can be developed for potential applications in chronic wound healing device area.

12. Organic Thin Films Based on DPP-DTT:C60 Blends Deposited by MAPLE

Authors: Socol, M; Preda, N; Breazu, C; Costas, A; Petre, G; Stanculescu, A; Popescu-Pelin, G; Mihailescu, A; Socol, G

Published: DEC 2020, NANOMATERIALS, 10, DOI: 10.3390/nano10122366

The matrix-assisted pulsed laser evaporation (MAPLE) technique was used for depositing thin films based on a recently developed conjugated polymer, poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno [3,2-b]thiophene)] (DPP-DTT) and fullerene C60 blends. The targets used in the MAPLE process were obtained by freezing chloroform solutions with different DPP-DTT:C60 weight ratios, with the MAPLE deposition being carried at a low laser fluence, varying the number of laser pulses. The structural, morphological, optical, and electrical properties of the DPP-DTT:C60 blend layers deposited by MAPLE were investigated in order to emphasize the influence of the DPP-DTT:C60 weight ratio and the number of laser pulses on these features. The preservation of the chemical structure of both DPP-DTT and C60 during the MAPLE deposition process is confirmed by the presence of their vibrational fingerprints in the FTIR spectra of the organic thin films. The UV-VIS and photoluminescence spectra of the obtained organic layers reveal the absorption bands attributed to DPP-DTT and the emission bands associated with C60, respectively. The morphology of the DPP-DTT:C60 blend films consists of aggregates and fibril-like structures. Regardless the DPP-DTT:C60 weight ratio and the number of laser pulses used during the MAPLE process, the current-voltage characteristics recorded, under illumination, of all structures developed on the MAPLE deposited layers evidenced a photovoltaic cell behavior. The results proved that the MAPLE emerges as a viable technique for depositing thin films based on conjugated polymers featured by a complex structure that can be further used to develop devices for applications in the solar cell area.

13. MAPLE Deposition of Binary and Ternary Organic Bulk Heterojunctions Based on Zinc Phthalocyanine

Authors: Socol, M; Preda, N; Petre, G; Costas, A; Rasoga, O; Popescu-Pelin, G; Mihailescu, A; Stanculescu, A; Socol, G

Published: OCT 2020, COATINGS, 10, DOI: 10.3390/coatings10100956

Organic bulk heterojunctions (BHJ) based on zinc phthalocyanine (ZnPc), fullerene compounds (C60 fullerene and [6,6]-phenyl C71 butyric acid methyl ester (PC70BM)), and 5,6,11,12-tetraphenylnaphthacene (rubrene) were fabricated through the matrix-assisted pulsed-laser evaporation (MAPLE) technique. Thus, ZnPc:C60 and ZnPc:PC70BM binary BHJ and ZnPc:rubrene:PC70BM ternary BHJ were deposited as thin films on various substrates. The preservation of the chemical structure of the organic compounds during the MAPLE deposition was confirmed by infrared spectroscopy. The structural, optical, and morphological properties of the deposited layers were investigated by X-ray diffraction (XRD), UV-Vis spectroscopy, photoluminescence (PL), field emission scanning electron microscopy (FESEM), and atomic force microscopy (AFM), respectively. Further, the electrical properties of the developed structures based on ZnPc:C60, ZnPc:PC70BM, and ZnPc:rubrene:PC70BM were evaluated. The J-V characteristics of the organic structures, recorded under illumination, show that an increase in the open-circuit voltage (V-OC) is achieved in the case of the ternary blend in comparison with that obtained for the binary blends. The results evidenced that MAPLE-deposited thin films containing binary and ternary organic bulk heterojunctions can find applications in the field of photovoltaic devices.

14. Biomorphic 3D fibrous networks based on ZnO, CuO and ZnO-CuO composite nanostructures prepared from eggshell membranes

Authors: Preda, N; Costas, A; Enculescu, M; Enculescu, I

Published: JAN 15 2020, MATERIALS CHEMISTRY AND PHYSICS, 240, DOI: 10.1016/j.matchemphys.2019.122205

Three-dimensional (3D) fibrous networks based on metal oxides were obtained by a bio-inspired approach: the replication of an ecological daily-waste, the eggshell membrane (ESM). The biomorphic process consists in the immersion of the ESM into aqueous solutions containing the metal salt precursors followed by the calcination of the metal ions impregnated ESM. Biomorphic ZnO, CuO and ZnO-CuO composite networks were obtained, their morphological, structural, compositional, optical, photocatalytical and electrical properties being evaluated. The scanning electron microscopy investigations proved that the hierarchical structure of the original organic template is perfectly replicated into inorganic architectures consisting of interconnected fibers containing metal oxide nanoparticles as building blocks. The photocatalytical properties of the metal oxide networks under solar simulator irradiation were tested through the degradation of methylene blue. Using Si/SiO2 patterned with interdigitated metallic electrodes as substrates during the calcination step, the electrical properties of the selfcontacted metal oxide networks were investigated. Thus, by replicating the unique architecture of the ESM, 3D metal oxide interwoven meshwork can be easily developed for various applications in fields such as photocatalysis, sensing, optoelectronic devices, etc.

15. Unidirectional Magnetic Anisotropy in Dense Vertically-Standing Arrays of Passivated Nickel Nanotubes

Authors: Locovei, C; Filipoiu, N; Kuncser, A; Stanciu, AE; Antohe, S; Florica, CF; Costas, A; Enculescu, I; Piraux, L; Kuncser, V; Antohe, VA

Published: DEC 2020, NANOMATERIALS, 10, DOI: 10.3390/nano10122444

We report the facile and low-cost preparation as well as detailed characterization of dense arrays of passivated ferromagnetic nickel (Ni) nanotubes (NTs) vertically-supported onto solid Au-coated Si substrates. The proposed fabrication method relies on electrochemical synthesis within the nanopores of a supported anodic aluminum oxide (AAO) template and allows for fine tuning of the NTs ferromagnetic walls just by changing the cathodic reduction potential during the nanostructures' electrochemical growth. Subsequently, the experimental platform allowed further passivation of the Ni NTs with the formation of ultra-thin antiferromagnetic layers of nickel oxide (NiO). Using adequately adapted magnetic measurements, we afterwards demonstrated that the thickness of the NT walls and of the thin antiferromagneticNiO layer, strongly influences the magnetic behavior of the dense array of exchange-coupled Ni/NiO NTs. The specific magnetic properties of these hybrid ferromagnetic/antiferromagnetic nanosystems were then correlated with the morpho-structural and geometrical parameters of the NTs, as well as ultimately strengthened by additionally-implemented micromagnetic simulations. The effect of the unidirectional anisotropy strongly amplified by the cylindrical geometry of the ferromagnetic/antiferromagnetic interfaces has been investigated with the magnetic field applied both parallel and perpendicular to the NTs axis.

16. Hybrid organic-inorganic thin films based on zinc phthalocyanine and zinc oxide deposited by MAPLE

Authors: Socol, M; Preda, N; Costas, A; Breazu, C; Stanculescu, A; Rasoga, O; Popescu-Pelin, G; Mihailescu, A; Socol, G

Published: FEB 15 2020, APPLIED SURFACE SCIENCE, 503, DOI: 10.1016/j.apsusc.2019.144317

Hybrid organic-inorganic thin films based on zinc phthalocyanine (ZnPc) and ZnO nanoparticles were deposited by Matrix Assisted Pulsed Laser Evaporation (MAPLE). Synthesized by a simple wet chemical precipitation method, the ZnO nanoparticles were featured by a hexagonal wurtzite structure, a band-gap value of similar to 3.3 eV and emission bands typical for this semiconductor. The hybrid films containing ZnPc and various amounts of ZnO nanoparticles were evaluated from morphological, compositional, structural, optical and electrical point of view. No chemical decomposition of the organic compound was observed in the FTIR spectra of the deposited layers. The transmittance and photoluminescence spectra recorded on hybrid films disclose the optical signature of both organic (ZnPc) and inorganic (ZnO) components. The electrical measurements carried out under illumination emphasized the importance of the quantity of the inorganic component on the performance parameters of the structures prepared with the hybrid films. Our study provides new insight in the MAPLE deposition of the organic-inorganic hybrid films with potential applications in the photovoltaic cells area.

17. Synthesis of Core-Double Shell Nylon-ZnO/Polypyrrole Electrospun Nanofibers

Authors: Beregoi, M; Preda, N; Costas, A; Enculescu, M; Negrea, RF; Iovu, H; Enculescu, I

Published: NOV 2020, NANOMATERIALS, 10, DOI: 10.3390/nano10112241

Core-double shell nylon-ZnO/polypyrrole electrospun nanofibers were fabricated by combining three straightforward methods (electrospinning, sol-gel synthesis and electrodeposition). The hybrid fibrous organic-inorganic nanocomposite was obtained starting from freestanding nylon 6/6 nanofibers obtained through electrospinning. Nylon meshes were functionalized with a very thin, continuous ZnO film by a sol-gel process and thermally treated in order to increase its crystallinity. Further, the ZnO coated networks were used as a working electrode for the electrochemical deposition of a very thin, homogenous polypyrrole layer. X-ray diffraction measurements were employed for characterizing the ZnO structures while spectroscopic techniques such as FTIR and Raman were employed for describing the polypyrrole layer. An elemental analysis was performed through X-ray microanalysis, confirming the expected double shell structure. A detailed micromorphological characterization through FESEM and TEM assays evidenced the deposition of both organic and inorganic layers. Highly transparent, flexible due to the presence of the polymer core and embedding a semiconducting heterojunction, such materials can be easily tailored and integrated in functional platforms with a wide range of applications.

18. Thin Films Based on Cobalt Phthalocyanine:C60 Fullerene:ZnO Hybrid Nanocomposite Obtained by Laser Evaporation

Authors: Socol, M; Preda, N; Costas, A; Borca, B; Popescu-Pelin, G; Mihailescu, A; Socol, G; Stanculescu, A

Published: MAR 2020, NANOMATERIALS, 10, DOI: 10.3390/nano10030468

Matrix-assisted pulsed laser evaporation (MAPLE) was used to deposit hybrid nanocomposite thin films based on cobalt phthalocyanine (CoPc), C60 fullerene and ZnO nanoparticles. The inorganic nanoparticles, with a size of about 20 nm, having the structural and optical properties characteristic of ZnO, were chemically synthesized by a simple precipitation method. Furthermore, ZnO nanoparticles were dispersed in a dimethyl sulfoxide solution in which CoPc and C60 had been dissolved, ready for the freezing MAPLE target. The effect of the concentration of ZnO nanoparticles on the structural, morphological, optical and electrical properties of the CoPc:C60:ZnO hybrid nanocomposite layers deposited by MAPLE was evaluated. The infrared spectra of the hybrid nanocomposite films confirm that the CoPc and C60 preserve their chemical structure during the laser deposition process. The CoPc optical signature is recognized in the ultraviolet-visible (UV-Vis) spectra of the obtained layers, these being dominated by the absorption bands associated to this organic compound while the ZnO optical fingerprint is identified in the photoluminescence spectra of the prepared layers, these disclosing the emission bands linked to this inorganic semiconductor. The hybrid nanocomposite layers exhibit globular morphology, which is typical for the thin films deposited by MAPLE. Current-voltage (J-V) characteristics of the structures developed on CoPc:C60:ZnO layers reveal that the addition of an appropriate amount of ZnO nanoparticles in the CoPc:C60 mixture leads to a more efficient charge transfer between the organic and inorganic components. Due to their photovoltaic effect, structures featuring such hybrid nanocomposite thin films deposited by MAPLE can have potential applications in the field of photovoltaic devices.

19. Core-shell nanowire arrays based on ZnO and CuxO for water stable photocatalysts

Authors: Florica, C; Costas, A; Preda, N; Beregoi, M; Kuncser, A; Apostol, N; Popa, C; Socol, G; Diculescu, V; Enculescu, I

Published: NOV 21 2019, SCIENTIFIC REPORTS, 9, DOI: 10.1038/s41598-019-53873-0

Staggered gap radial heterojunctions based on ZnO-CuxO core-shell nanowires are used as water stable photocatalysts to harvest solar energy for pollutants removal. ZnO nanowires with a wurtzite crystalline structure and a band gap of approximately 3.3 eV are obtained by thermal oxidation in air. These are covered with an amorphous CuxO layer having a band gap of 1.74 eV and subsequently form core-shell heterojunctions. The electrical characterization of the ZnO pristine and ZnO-CuxO core-shell nanowires emphasizes the charge transfer phenomena at the junction and at the interface between the nanowires and water based solutions. The methylene blue degradation mechanism is discussed taking into consideration the dissolution of ZnO in water based solutions for ZnO nanowires and ZnO-CuxO core-shell nanowires with different shell thicknesses. An optimum thickness of the CuxO layer is used to obtain water stable photocatalysts, where the ZnO-CuxO radial heterojunction enhances the separation and transport of the photogenerated charge carriers when irradiating with UV-light, leading to swift pollutant degradation.

20. Radial heterojunction based on single ZnO-CuxO core-shell nanowire for photodetector applications

Authors: Costas, A; Florica, C; Preda, N; Apostol, N; Kuncser, A; Nitescu, A; Enculescu, I

Published: APR 3 2019, SCIENTIFIC REPORTS, 9, DOI: 10.1038/s41598-019-42060-w

ZnO-CuxO core-shell radial heterojunction nanowire arrays were fabricated by a straightforward approach which combine two simple, cost effective and large-scale preparation methods: (i) thermal oxidation in air of a zinc foil for obtaining ZnO nanowire arrays and (ii) radio frequency magnetron sputtering for covering the surface of the ZnO nanowires with a CuxO thin film. The structural, compositional, morphological and optical properties of the high aspect ratio ZnO-CuxO core-shell nanowire arrays were investigated. Individual ZnO-CuxO core-shell nanowires were contacted with Pt electrodes by means of electron beam lithography technique, diode behaviour being demonstrated. Further it was found that these n-p radial heterojunction diodes based on single ZnO-CuxO nanowires exhibit a change in the current under UV light illumination and therefore behaving as photodetectors.

21. Pulsed Laser Deposition of Indium Tin Oxide Thin Films on Nanopatterned Glass Substrates

Authors: Socol, M; Preda, N; Rasoga, O; Costas, A; Stanculescu, A; Breazu, C; Gherendi, F; Socol, G

Published: JAN 2019, COATINGS, 9, DOI: 10.3390/coatings9010019

Indium tin oxide (ITO) thin films were grown on nanopatterned glass substrates by the pulsed laser deposition (PLD) technique. The deposition was carried out at 1.2 J/cm(2) laser fluence, low oxygen pressure (1.5 Pa) and on unheated substrate. Arrays of periodic pillars with widths of similar to 350 nm, heights of similar to 250 nm, and separation pitches of similar to 1100 nm were fabricated on glass substrates using UV nanoimprint lithography (UV-NIL), a simple, cost-effective, and high throughput technique used to fabricate nanopatterns on large areas. In order to emphasize the influence of the periodic patterns on the properties of the nanostructured ITO films, this transparent conductive oxide (TCO) was also grown on flat glass substrates. Therefore, the structural, compositional, morphological, optical, and electrical properties of both non-patterned and patterned ITO films were investigated in a comparative manner. The energy dispersive X-ray analysis (EDX) confirms that the ITO films preserve the In2O3:SnO2 weight ratio from the solid ITO target. The SEM and atomic force microscopy (AFM) images prove that the deposited ITO films retain the pattern of the glass substrates. The optical investigations reveal that patterned ITO films present a good optical transmittance. The electrical measurements show that both the non-patterned and patterned ITO films are characterized by a low electrical resistivity (<2.8 x 10(-4)). However, an improvement in the Hall mobility was achieved in the case of the nanopatterned ITO films, evidencing the potential applications of such nanopatterned TCO films obtained by PLD in photovoltaic and light emitting devices.

22. Ferroelectric Field Effect Transistors Based on PZT and IGZO

Authors: Besleaga, C; Radu, R; Balescu, LM; Stancu, V; Costas, A; Dumitru, V; Stan, G; Pintilie, L

Published: 2019, IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY, 7, 275, DOI: 10.1109/JEDS.2019.2895367

Ferroelectric field effect transistors (FeFETs) based on lead zirconate titanate (PZT) ferroelectric material and amorphous-indium-gallium-zinc oxide (a-IGZO) were developed and characterized. The PZT material was processed by a sol-gel method and then used as ferroelectric gate. The a-IGZO thin films, having the role of channel semiconductor, were deposited by radio-frequency magnetron sputtering, at a temperature of similar to 50 degrees C. Characteristics of a typical field effect transistor with SiO2 gate insulator, grown on highly doped silicon, and of the PZT-based FeFET were compared. It was proven that the FeFETs had promising performances in terms of I-on/I-off ratio (i.e., 10(6)) and IDS retention behavior.

23. Magnetism and magnetoresistance of single Ni-Cu alloy nanowires

Authors: Costas, A; Florica, C; Matei, E; Toimil-Molares, ME; Stavarache, I; Kuncser, A; Kuncser, V; Enculescu, I

Published: AUG 30 2018, BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 9, 2355, DOI: 10.3762/bjnano.9.219

Arrays of magnetic Ni-Cu alloy nanowires with different compositions were prepared by a template-replication technique using electrochemical deposition into polycarbonate nanoporous membranes. Photolithography was employed for obtaining interdigitated metallic electrode systems of Ti/Au onto SiO2/Si substrates and subsequent electron beam lithography was used for contacting single nanowires in order to investigate their galvano-magnetic properties. The results of the magnetoresistance measurements made on single Ni-Cu alloy nanowires of different compositions have been reported and discussed in detail. A direct methodology for transforming the magnetoresistance data into the corresponding magnetic hysteresis loops was proposed, opening new possibilities for an easy magnetic investigation of single magnetic nanowires in the peculiar cases of Stoner-Wohlfarth-like magnetization reversal mechanisms. The magnetic parameters of single Ni-Cu nanowires of different Ni content have been estimated and discussed by the interpretation of the as derived magnetic hysteresis loops via micromagnetic modeling. It has been theoretically proven that the proposed methodology can be applied over a large range of nanowire diameters if the measurement geometry is suitably chosen.

24. Flexible organic heterostructures obtained by MAPLE

Authors: Socol, M; Preda, N; Breazu, C; Stanculescu, A; Costas, A; Stanculescu, F; Girtan, M; Gherendi, F; Popescu-Pelin, G; Socol, G

Published: SEP 2018, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 124, DOI: 10.1007/s00339-018-1960-3

Organic heterostructures based on zinc phthalocyanine (ZnPc) and perylene tetracarboxylic dianhydride (PTCDA) were deposited by matrix-assisted pulsed laser evaporation (MAPLE) technique on conductive flexible substrate (ITO/PET) in three configurations: ZnPc/PTCDA (stacked layers), ZnPc:PTCDA (blend) and ZnPc/ZnPc:PTCDA/PTCDA. The effect of the configuration on the optical and electrical properties of the obtained heterostructures was investigated. For all heterostructures was observed an improved optical absorption in visible domain. The I-V characteristics recorded under illumination, revealed higher short circuit current (I (SC)) values for the ZnPc:PTCDA and ZnPc/ZnPc:PTCDA/PTCDA structures in comparison with that of the ZnPc/PTCDA structure. The results proved that by MAPLE can be obtained flexible organic heterostructures (in different configurations) with properties adequate for applications in flexible electronics and solar cell fields.

25. Organic heterostructures obtained on ZnO/Ag/ZnO electrode

Authors: Socol, M; Preda, N; Breazu, C; Florica, C; Costas, A; Istrate, CM; Stanculescu, A; Girtan, M; Gherendi, F

Published: AUG 2018, VACUUM, 154, 370, DOI: 10.1016/j.vacuum.2018.05.039

This work is focused on the use of multilayer transparent conductive electrode (TCE) based on ZnO/Ag/ZnO in the fabrication of the organic heterostructures. The ZnO/Ag/ZnO obtained combining sputtering/thermal evaporation/sputtering techniques is featured by a good optical transmittance, a low electrical resistivity and a reduced roughness. All these characteristics recommend it as a viable alternative to indium tin oxide (ITO) for different applications. The organic materials, N,N' - diphenyl N,N' - bis (1 - aphthyl) 1,1' - biphenyl 4,4' - diamine (alpha-NPD), 5,12-Dihydro-5-12-dimethylquino [2,3-b]acridine-7,14dione (DMQA) and 4,7 diphenyl-1,10-phenanthroline (BPhen) were deposited by vacuum thermal evaporation (VTE) method, the properties of the obtained layers being investigated by FTIR, UV-VIS and PL) spectroscopy. The I-V characteristic (recorded in dark) of the organic heterostructure fabricated on the ZnO/Ag/ZriO electrode shows diode behavior, revealing its potential applications in the organic light emitting devices (OLED).

26. Versatile Actuators Based on Polypyrrole-Coated Metalized Eggshell Membranes

Authors: Beregoi, M; Preda, N; Evanghelidis, A; Costas, A; Enculescu, I

Published: AUG 2018, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6, 10181, DOI: 10.1021/acssuschemeng.8b01489

Eggshell membranes were employed as biological scaffolds for developing soft and versatile actuators. A particular architecture, consisting of eggshell membrane coated with polypyrrole, has been fabricated and has been found to be a green, inexpensive, lightweight, and easy to handle class of actuators. The polypyrrole-coated eggshell membrane devices were tested in liquid, ambient atmosphere and controlled humidity environment, with the recorded movements proving their versatility. In 1 M NaCl aqueous solution, by applying successive potential pulses, the actuator contracts/expands owing to the expulsion/insertion of the electrolyte ions out/into polypyrrole film, producing a displacement of similar to 0.1 cm. In air, upon application of voltages from 2 to 5 V on a V-shaped geometry actuator, it bends due to water desorption from its structure induced by Joule heating, generating a displacement which reaches similar to 0.4 cm at 5 V. In a chamber with controlled humidity, the decrease of humidity stimulates a bending/curling motion of the actuator, achieving a displacement of similar to 2.1 cm at 50% relative humidity. Upon modification of the humidity, these actuators move, hold, and release delicate and lightweight objects. Such polypyrrole-coated eggshell membrane actuators which operate in different environments and respond to multiple stimuli can have potential applications in biomimetic micromanipulators or artificial muscle fields.

27. A straightforward route to obtain organic/inorganic hybrid network from bio-waste: Electroless deposition of ZnO nanostructures on eggshell membranes

Authors: Preda, N; Costas, A; Beregoi, M; Enculescu, I

Published: AUG 16 2018, CHEMICAL PHYSICS LETTERS, 706, 30, DOI: 10.1016/j.cplett.2018.05.073

Bio-waste eggshell membranes (ESM) present a unique micro-architecture consisting in an interwoven fibrous network which can be functionalized with metal oxides resulting in hybrid materials. ESM were covered with ZnO nanostructures by electroless deposition using Au as catalyst. The structural, optical, morphological and wetting properties of the pristine ESM and ESM/ZnO were evaluated. The ESM fibers were uniformly coated by ZnO hexagonal prisms, the hybrid ESM/ZnO preserving the water absorption characteristic of the pristine ESM. Combining an abundant bio-waste with a simple wet chemical synthesis method, flexible organic/inorganic hybrid networks based on ZnO-functionalized ESM can be designed for various applications. (C) 2018 Elsevier B.V. All rights reserved.

28. ZnO nanowires grown directly on zinc foils by thermal oxidation in air: Wetting and water adhesion properties

Authors: Florica, C; Preda, N; Costas, A; Zgura, I; Enculescu, I

Published: MAY 1 2016, MATERIALS LETTERS, 170, 159, DOI: 10.1016/j.matlet.2016.02.035

Large scale ZnO nanowire arrays were grown directly on zinc foils using the thermal oxidation in air method. The X-ray diffraction and reflectance investigations confirm that the as-grown nanowires properties are typical for ZnO having a hexagonal wurtzite crystalline structure and band-gap values between 3.2 and 3.3 eV. The scanning electron microscopy images prove that the density and the dimensions (diameter and length) of the ZnO nanowires can be tuned by controlling the oxidation temperature. Wettability studies reveal in the case of Zn foils a hydrophilic behavior with high water droplet adhesion which is transformed into a superhydrophobic one with low water droplet adhesion after the foils' surfaces are covered with ZnO nanowires. Obtaining functional surfaces with such interesting wetting properties using a simple, inexpensive and highly reproducible thermal oxidation in air technique is very attractive for anticorrosion coatings and self-cleaning applications. (C) 2016 Elsevier B.V. All rights reserved.

29. Mechanism of the cathodic process coupled to the oxidation of iron monosulfide by dissolved oxygen

Authors: Duinea, MI; Costas, A; Baibarac, M; Chirita, P

Published: APR 1 2016, JOURNAL OF COLLOID AND INTERFACE SCIENCE, 467, 59, DOI: 10.1016/j.jcis.2016.01.010

This study investigated the mechanism of iron monosulfide (FeS) oxidation by dissolved oxygen (O-2(aq)). Synthetic FeS was reacted with O-2(aq) for 6 days and at 25 degrees C. We have characterized the initial and reacted FeS surface using Scanning Electron Microscopy coupled with Energy Dispersive X-ray (SEM/EDX) analysis, Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR). It was found that during the aqueous oxidation of FeS new solid phases (disulfide, polysulfide, elemental sulfur, ferric oxyhydroxides and Fe3O4) develop on the mineral surface. The results of potentiodynamic polarization experiments show that after 2 days of FeS electrode immersion in oxygen bearing solution (OBS) at initial pH 5.1 and 25 degrees C the modulus of cathodic Tafel slopes dramatically decreases, from 393 mV/dec to 86 mV/dec. This decrease is ascribed to the change of the mechanism of electron transfer from cathodic sites to O-2 (mechanism of cathodic process). The oxidation current densities (j(ox)) indicate that mineral oxidative dissolution is not inhibited by pH increase up to 6.7. Another conclusion, which emerges from the analysis of j(ox), is that the dissolved Fe3+ does not intermediate the aqueous oxidation of FeS. The results of electrochemical impedance spectroscopy (EIS) show that after 2 days of contact between electrode and OBS the properties of FeS/water interface change. From the analysis of the EIS, FTIR spectroscopy, Raman spectroscopy and SEM/EDX data we can conclude that the change of FeS/water interface properties accompanies the formation of new solid phases on the mineral surface. The new characteristics of the surface layer and FeS/water interface do not cause the inhibition of mineral oxidation. (C) 2016 Elsevier Inc. All rights reserved.

30. High performance FETs based on ZnO nanowires synthesized by low cost methods

Authors: Florica, C; Costas, A; Kuncser, A; Preda, N; Enculescu, I

Published: NOV 25 2016, NANOTECHNOLOGY, 27, DOI: 10.1088/0957-4484/27/47/475303

Single ZnO nanowires prepared by wet and dry methods are used as channels in high performance back-gated field effect transistors working in low power operation mode, with on-off ratios up to 10(5) and mobilities up to 167 cm(2) V-1 s(-1). The nanowires' properties, generated by the growth techniques, influence the parameters of the transistors, therefore a throughout comparison is made.

31. Electrical properties of templateless electrodeposited ZnO nanowires

Authors: Matei, E; Costas, A; Florica, C; Enculescu, M; Pintilie, I; Pintilie, L; Enculescu, I

Published: FEB 2016, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 42, 372, DOI: 10.1016/j.mssp.2015.11.007

Electrochemical deposition allows the preparation of ZnO nanostructures with precisely controlled morphology and properties, by finely tuning the process parameters. ZnO nanowires were deposited onto gold substrates by electrodeposition from a low concentration zinc nitrate bath Photolithography was employed for patterning interdigitated electrode systems onto silicon/silicon dioxide substrates and ZnO electrodeposition lead to wires connected to each other by bridging neighboring interdigits allowing electronic transport characterization. Optical measurements, i.e. reflection and photoluminescence spectroscopy, were performed and the results were correlated to electronic transport data. We found that we deal with a system for which one can apply a model of space charge limited currents with different traps energy distribution as a consequence of electrodeposition rate. Current versus temperature measurements show different behavior for lower and higher range of temperatures. Such nanowires, fabricated and contacted in a straightforward way, allow a wide area of applications ranging from conductometric bio- or chemo-sensors to optoelectronic devices. (C) 2015 Elsevier Ltd. All rights reserved.

32. Electrical properties of single CdTe nanowires

Authors: Matei, E; Florica, C; Costas, A; Toimil-Molares, ME; Enculescu, I

Published: FEB 12 2015, BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 6, 450, DOI: 10.3762/bjnano.6.45

Ion track, nanoporous membranes were employed as templates for the preparation of CdTe nanowires. For this purpose, electrochemical deposition from a bath containing Cd and Te ions was employed. This process leads to high aspect ratio CdTe nanowires, which were harvested and placed on a substrate with lithographically patterned, interdigitated electrodes. Focused ion beam-induced metallization was used to produce individual nanowires with electrical contacts and electrical measurements were performed on these individual nanowires. The influence of a bottom gate was investigated and it was found that surface passivation leads to improved transport properties.

33. ELECTROSPRAYING OF ZnO MICROSTRUCTURES FOR ELECTRICAL CONTACTING

Authors: Costas, A; Florica, C; Evanghelidis, A; Enculescu, M; Preda, N; Enculescu, I

Published: OCT-DEC 2015, DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES, 10, 1188, DOI:

ZnO complex microstructures were deposited onto interdigitated metallic electrodes by electrospraying. Simple methods, such as wet chemical precipitation and optical lithography, were used for the synthesis of flower-like and snowflake-like ZnO structures and for the preparation of interdigitated metallic electrodes, respectively. The electrosprayed ZnO particles preserve the structural, optical and morphological properties of the chemically synthesized ZnO powders. During the electrospraying process, the ZnO microstructures form bridges between the interdigitated metallic electrodes leading to electrical contacting. Changes in the electron transport through the ZnO microstructures are evidenced by their exposure to ammonia or their passivation with poly(methyl methacrylate). Merging such easy-scalable and low-cost techniques, devices based on electrosprayed complex ZnO structures can be designed.

34. Electrical properties of single CuO nanowires for device fabrication: Diodes and field effect transistors

Authors: Florica, C; Costas, A; Boni, AG; Negrea, R; Ion, L; Preda, N; Pintilie, L; Enculescu, I

Published: JUN 1 2015, APPLIED PHYSICS LETTERS, 106, DOI: 10.1063/1.4921914

High aspect ratio CuO nanowires are synthesized by a simple and scalable method, thermal oxidation in air. The structural, morphological, optical, and electrical properties of the semiconducting nanowires were studied. Au-Ti/CuO nanowire and Pt/CuO nanowire electrical contacts were investigated. A dominant Schottky mechanism was evidenced in the Au-Ti/CuO nanowire junction and an ohmic behavior was observed for the Pt/CuO nanowire junction. The Pt/CuO nanowire/Pt structure allows the measurements of the intrinsic transport properties of the single CuO nanowires. It was found that an activation mechanism describes the behavior at higher temperatures, while a nearest neighbor hopping transport mechanism is characteristic at low temperatures. This was also confirmed by four-probe resistivity measurements on the single CuO nanowires. By changing the metal/semiconductor interface, devices such as Schottky diodes and field effect transistors based on single CuO p-type nanowire semiconductor channel are obtained. These devices are suitable for being used in various electronic circuits where their size related properties can be exploited. (c) 2015 AIP Publishing LLC.

35. Metallic Nanowires and Nanotubes Prepared by Template Replication

Authors: Matei, E; Enculescu, M; Preda, N; Florica, C; Costas, A; Busuioc, C; Molares, MET; Kuncser, V; Enculescu, I

Published: 2014, SIZE EFFECTS IN NANOSTRUCTURES: BASICS AND APPLICATIONS, 205, 165, DOI: 10.1007/978-3-662-44479-5_6

Low dimensional nanostructures represent a hot scientific field nowadays due mainly to the tremendous potential for applications. Low dimensions open the possibilities for both ultra-miniaturization and increase in functionality. Numerous procedures were developed for fabricating such nanostructures. Template replication represents a highly effective method in fabricating metallic nanowires and nanotubes. The approach is characterized by the excellent control in obtaining nano objects with the desired shape and dimensions. A large variety of templates are available ranging from viruses and proteins to nanoporous membranes fabricated by using swift heavy ion accelerators. In the following chapter the main steps involved in employing the method for fabricating metalic nanowires and nanotubes by replicating ion track nanoporous membranes were described. The steps include here membrane fabrication and replication and involve track etching and electrochemical metal deposition. The influence of the process parameters on the properties of the nanoobjects prepared by this approach was reviewed. It was found that simple experimental parameters can be chosen in such a way that the functionality of the nanowires or nanotubes can be finely tuned.

36. Field Effect Transistor with Electrodeposited ZnO Nanowire Channel

Authors: Florica, C; Matei, E; Costas, A; Molares, MET; Enculescu, I

Published: AUG 10 2014, ELECTROCHIMICA ACTA, 137, 297, DOI: 10.1016/j.electacta.2014.05.124

ZnO nanowires were prepared by electrochemical deposition in polycarbonate ion track templates. After the deposition process the polymer templates were dissolved in dichloromethane and the nanowires were harvested by ultrasonication in isopropyl. A droplet of nanowire suspension was placed on a Si/SiO2 substrate patterned with interdigitated electrodes. By means of electron beam lithography single nanowires were selected and provided with electrical contacts. We found that in order to obtain reliable electrical contacts and typical field effect characteristics the electrode deposition process needs to be adapted to the 3 D shape of the wires and that annealing and passivation treatments are necessary. (C) 2014 Elsevier Ltd. All rights reserved.

37. DEPENDENCE ON THE DYE'S TYPE AND CONCENTRATION OF THE EMISSIVE PROPERTIES OF ELECTROSPUN DYE-DOPED BEADED NANOFIBERS

Authors: Enculescu, M; Evanghelidis, A; Busuioc, C; Florica, C; Costas, A; Oancea, M; Preda, N; Matei, E; Enculescu, I

Published: APR-JUN 2014, DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES, 9, 816, DOI:

Luminescent polymer fibers were obtained by electrospinning solutions of 8% (in ethanol) polyvinylpyrrolidone (PVP) doped with three different dyes (coumarin 6, rhodamine 6G and sulforhodamine 101). Using the same parameters for the electrospinning process, nanofibers with diameters between 200 and 800 nm and different sizes and distributions of the beads were obtained as proven by scanning electron microscopy (SEM). We assessed the dependence of their emissive properties (intensity and wavelength) on the type of dye using photoluminescence (PL) spectra for the same concentration of the dopand dye (10(-3)M). Moreover, employing 4 different concentrations for coumarin 6 and rhodamine 6G (from 10(-3) to 10(-6) M) we evaluated the dependence with the concentration of the dye on the emissive properties of the electrospun dye-doped PVP nanofibers.

38. MORPHOLOGY-CONTROLLED SYNTHESIS OF ZnO STRUCTURES BY A SIMPLE WET CHEMICAL METHOD

Authors: Preda, N; Enculescu, M; Florica, C; Costas, A; Evanghelidis, A; Matei, E; Enculescu, I

Published: OCT-DEC 2013, DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES, 8, 1600, DOI:

Zinc oxide particles were synthesized by a simple wet chemical method. Using zinc nitrate and various precipitating agents, like KOH, NaOH and (CH2)(6)N-4, particles with different morphologies were obtained. Also, the addition of a structure-directing agent, like gum arabic - a highly branched biopolymer, leads to a decrease in the ZnO particles size (for KOH and NaOH) and to a dramatical change of the ZnO particle shape in the case of (CH2)(6)N-4. The X-ray diffraction analysis showed that all obtained samples are of wurtzite structure. The reflectance and photoluminescence spectra have been used to investigate the optical properties of the ZnO structures. The morphologies observed by scanning electron microscopy reveal snowflake-like, flower-like, star-like and double-raspberry-like structures. A possible formation mechanism for ZnO micro/nanostructures with different morphologies was proposed. The biopolymer-assisted crystallization method could provide a facile approach to synthesize other desired compounds with controllable morphology.

Dr. Andreea COSTAS

Scientific Researcher I