National Institute Of Materials Physics - Romania

We report on the Matrix Assisted Pulsed Laser Evaporation, laser technology for depositing biocompatible, antimicrobial, hydrophilic, and biodegradable complex hybrid polymeric system loaded with essential cypress-oil and magnetite nanoparticles as resorbable implants, capable of targeting possible hyperthermia applications, an anticancer moderate field heating therapy. Magnetite nanoparticles based on iron oxide (Fe3O4) coated with Cypress essential oil (denoted: Fe3O4- Cypress) and embedded in PLGA (poly(lactic-co-glycolic acid) (denoted: PLGA-Fe3O4- Cypress-) and PLGA - poly(3,4ethylene dioxythiophene) doped with poly(styrene sulfonate) anions) (PEDOT: PSS) mixture (denoted: PLGA-Fe3O4- Cypress- PEDOT: PSS) were used as MAPLE targets. The controlled drug delivery of the active Cypress oil, an antimicrobial therapeutic agent from Fe3O4- Cypress nanoparticles could be possible by applying an external radio frequency (RF) magnetic field. The Fe3O4-Cypress-based powders as well as the final hybrid coatings have been characterized in terms of stoichiometry, morphology, magnetic, antimicrobial properties, biocompatibility, and response to external physical stimuli. FTIR analyses confirmed the quasi-stoichiometric laser transfer of organic compounds while the XRD evidenced the semicrystalline structure of deposited thin films. SEM and AFM images evidence that conductive polymer addition led to the films' relief flattening and a decrease in the coatings' thickness and roughness by changing the polymeric packaging. The samples containing conductive polymer exhibited 3 times higher current and corrosion rate values. All coatings are hydrophilic and revealed enhanced cellular viability when cultured with osteoblast-like MG-63 cells. The composite structures exhibited significant antimicrobial activity against Gram-positive (Staphylococcus aureus), and Gram -negative (Escherichia coli ) bacteria, as well as to the opportunistic yeast Candida albicans.

Herein, as a novel idea, a microwave (MW) post-treatment strategy is proposed to modify the structure and surface characteristics of already prepared activated carbons (ACs) for application in non-aqueous Electric Double-Layer Capacitors. Pistachio nutshell-derived carbon is first KOH-activated and then subjected to MW irradiation for 0, 2, 5, and 10 minutes. X-ray Diffraction and Raman analyses show that MW post-treatment leads to structural modifications, and FTIR and XPS analyses reveal relative elimination of surface functional groups which results in subsequent enhancement in water contact angle and renders more favorable surface wetting of carbon by non-aqueous organic electrolyte. The performance characteristics of symmetrical non-aqueous supercapacitors incorporated with the prepared ACs show a significant positive effect of MW irradiation in such a way that 0 and 10-minute-irradiated ACs demonstrate 152 and 392 F g-1 capacities, respectively, at 1.75 A g-1, with the corresponding specific energies and powers of 340 Wh kg-1 and 11 kW kg-1 for AC-10, respectively. This remarkable enhancement in the electrochemical performance is attributed to the effective role of the MW post-treatment in modifying the AC structure as well as providing AC surfaces that have better wettability with less polar non-aqueous electrolyte. Moreover, this strategy is additionally applicable to make hydrophobic activated carbons for other applications as the absorption of less polar contaminants from liquid or gaseous environments.

Magneto-optical measurements enable the identification of Fe2+ and Fe3+ in the R and S blocks of BaFe12O19 Mhexaferrite powder obtained by sol -gel processing, followed by thermal annealing at 900 C for 3 hours. The ferromagnetic phase is evidenced by the spin-majority configuration (Fe3+) due to their unpaired electrons between d -d orbitals, while the Fe2+ in the low spin possesses diamagnetic behavior strongly dependent on the surrounded crystal field. Additionally, the irradiation with gamma rays changes the ratio between Fe2+/Fe3+, mainly on the surface of BaFe12O19 nanocrystals. These changes were confirmed by X-ray Photoelectron Spectroscopy measurements, in which the concentration of Fe2+ increased from 69% to 82%, while the one of Fe3+ decreased from 31% to 18%. he thermoluminescent measurements reveal the same changes of Fe3+ in Fe2+ by electron capturing during irradiation, which is released as a red emission after recombination processes. The changes are explained by the increasing of some Fe-O bonds along the c-axis, mainly due to breaking a part of these bonds. The X-ray analysis confirms the changing of the parameters for the BaFe12O19 hexagonal structure.

This work presents the ability of WO3-based sensors to detect low traces of acetone, specifically within the range of 0.25-5 ppm, specific to the in -field atmosphere. The WO3 powder was synthesised through the hydrothermal method. Morpho-structural investigations showed a monoclinic structure and a good crystallization of the WO3 powder, containing well -grown and faceted grains along low -index crystallographic planes. The paste obtained by mixing the powder with propanediol was screen -printed as a thick layer onto commercial alumina substrates, obtaining the chemical sensors. A dynamic computer -controlled Gas Mixing System was utilized to ensure controlled airflow with variable relative humidity and acetone concentrations. The sensor response was explained based on physico-chemical equations, taking into consideration pre -adsorbed species of oxygen and water, both of which are relevant constituents of atmospheric conditions. The results highlight the applicative potential of WO3, having a good signal-to-noise ratio in relative humidity conditions up to 90% and a pronounced sensitive selectivity to acetone.

The outstanding properties exhibited by the p-type NiO nanostructures can be greatly affected by morpho-structural and defect characteristics with constructive or competing effects. We have conducted an in-depth study on NiO nanoparticles obtained by hydrothermal synthesis and submitted to various thermal treatments, to monitor the evolution of their structural properties and the effect of the thermal history on their CO sensing. Correlated electron paramagnetic resonance and analytical transmission electron microscopy investigations evidenced an amount of up to 1 % metallic nickel clusters close to surface in the NiO nanoparticles calcined at 400 degrees C and 500 degrees C for 8 h. Subsequent annealing in vacuum and in air of the sample calcined at 400 degrees C resulted in different size distributions and morphology of the NiO nanoparticles and an increase/decrease of the nickel phase, respectively. Comparative CO sensing tests on the two pristine samples and on the sample calcined at 400 degrees C and further annealed in air at 500 degrees C for 2 h showed an increase in the baseline resistance of the later due to the decrease of free charge carriers induced by the dissolution of the nickel clusters. The overall CO sensing results show a strong dependence on the samples thermal history.

Kesterite-based copper zinc tin sulfide (CZTS) and copper zinc tin selenide (CZTSe) thin films have attracted considerable attention as promising materials for sustainable and cost-effective thin-film solar cells. However, the successful integration of these materials into photovoltaic devices is hindered by the coexistence of secondary phases, which can significantly affect device performance and stability. This review article provides a comprehensive overview of recent progress and challenges in controlling secondary phases in kesterite CZTS and CZTSe thin films. Drawing from relevant studies, we discuss state-of-the-art strategies and techniques employed to mitigate the formation of secondary phases. These include a range of deposition methods, such as electrodeposition, sol-gel, spray pyrolysis, evaporation, pulsed laser deposition, and sputtering, each presenting distinct benefits in enhancing phase purity. This study highlights the importance of employing various characterization techniques, such as X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy, for the precise identification of secondary phases in CZTS and CZTSe thin films. Furthermore, the review discusses innovative strategies and techniques aimed at mitigating the occurrence of secondary phases, including process optimization, compositional tuning, and post-deposition treatments. These approaches offer promising avenues for enhancing the purity and performance of kesterite-based thin-film solar cells. Challenges and open questions in this field are addressed, and potential future research directions are proposed. By comprehensively analyzing recent advancements, this review contributes to a deeper understanding of secondary phase-related issues in kesterite CZT(S/Se) thin films, paving the way for enhanced performance and commercial viability of thin-film solar cell technologies.

Antidepressant drugs play a crucial role in the treatment of mental health disorders, but their efficacy and safety can be compromised by drug degradation. Recent reports point to several drugs found in concentrations ranging from the limit of detection (LOD) to hundreds of ng/L in wastewater plants around the globe; hence, antidepressants can be considered emerging pollutants with potential consequences for human health and wellbeing. Understanding and implementing effective degradation strategies are essential not only to ensure the stability and potency of these medications but also for their safe disposal in line with current environment remediation goals. This review provides an overview of degradation pathways for amitriptyline, a typical tricyclic antidepressant drug, by exploring chemical routes such as oxidation, hydrolysis, and photodegradation. Connex issues such as stability-enhancing approaches through formulation and packaging considerations, regulatory guidelines, and quality control measures are also briefly noted. Specific case studies of amitriptyline degradation pathways forecast the future perspectives and challenges in this field, helping researchers and pharmaceutical manufacturers to provide guidelines for the most effective degradation pathways employed for minimal environmental impact.

In this work, the effects of 60Co y -ray irradiation on high resistivity p -type diodes have been investigated. The diodes were exposed to dose values of 0.1, 0.2, 1, and 2 MGy. Both macroscopic (I-V, C-V) and microscopic investigations, by means of Thermally Stimulated Current (TSC) and Deep Level Transient Spectroscopy (DLTS) techniques, were conducted to characterize the radiation -induced changes. The investigated diodes were manufactured on high resistivity p -type Float Zone (FZ) silicon and were further classified into two types based on the isolation technique between the pad and guard ring: p -stop and p -spray. After irradiation, the macroscopic results of current-voltage and capacitance-voltage measurements were obtained and compared with existing literature data. Additionally, the microscopic measurements focused on the development of the concentration of different radiation -induced defects, including the Boron interstitial -Oxygen interstitial (BiOi) complex, the Carbon interstitial -Oxygen interstitial (CiOi) defect, the H40K, and the so-called I*P. To investigate the thermal stability of induced defects in the bulk, isochronal annealing studies were performed in the temperature range of 100 degrees C to 300 degrees C. These annealing processes were carried out on diodes irradiated with doses of 1 and 2 MGy. Furthermore, in order to investigate the unexpected results observed in the C-V measurements after irradiation with high dose values, the surface conductance between the pad and guard ring was measured as a function of both dose and annealing temperature.

Developing new materials to be applied in extreme environments is an opportunity and a challenge for the future. High entropy alloys are new materials that seem promising approaches to work in nuclear fusion reactors. In this work, FeTaTiVW high entropy alloys were developed and characterized with Molecular Dynamic and Hybrid Molecular Dynamic Monte Carlo simulations. The simulation results show that phase separation originates a lower potential energy per atom and a high level of segregation compared to those of a uniform solid solution. Moreover, the experimental diffractogram of the milled powder shows the formation of a body-centred cubic-type structure and the presence of TiO2. In addition, the microstructure of the consolidated material evidenced three phases: W-rich, Ti-rich, and a phase with all the elements. This phase separation observed in the microstructure agrees with the Hybrid Molecular Dynamic Monte Carlo simulation. Moreover, the consolidated material's thermal conductivity and specific heat are almost constant from 25 degrees C to 1000 degrees C, and linear expansion increases with increasing temperature. On the other hand, specific heat and thermal expansion values are in between CuCrZr and W values (materials chosen for the reactor walls). The FeTaTiVW high entropy alloy evidences a ductile behaviour at 1000 degrees C. Therefore, the promising thermal properties of this system can be attributed to the multiple phases and systems with different compositions of the same elements, which is exciting for future developments.

This paper tackles the influence of the functionalization of polystyrene and graphene oxide (GO) composites on the flammability characteristics. A microscale combustion calorimeter (MCC) was used to experimentally determine the heat release capacity (HRC), the specific heat release rate (HRR) and the total heat released (THR). Neural models were designed that correlate the THR with a number of parameters related to the composition and type of flame retardant used, the heating rate, the amount of residue, the HRC, the peak heat release rate (PHRR), the temperature at the peak pyrolysis rate (TPHRR) and the time elapsed until the occurrence of the peak heat release rate (Time). The best results in the training, validation and testing stages were achieved with the neural model with 9 neurons in the input layer, 40 neurons in the hidden layer and one neuron in the output layer. This model was incorporated into an optimization procedure, based on a genetic algorithm, to establish the values of the input parameters used in the training of the neural networks, in order to generate a minimum THR value, which is the output parameter. Since the synthesis of polystyrene particles with different GO concentrations is costly, this research helps to reduce the number of experimental tests and allows to determine the best GO concentration by means of neural models and genetic algorithms.