National Institute Of Materials Physics - Romania

Magnesium and magnesium thin alloy films were deposited using a thermionic vacuum arc (TVA), which has multiple applications in the field of metallic electrodes for diodes and batteries or active corrosion protection. An improved laser-induced TVA (LTVA) method favors the crystallization processes of the deposited magnesium-based films because the interaction between laser and plasma discharge changes the thermal energy during photonic processes due to the local temperature variation. Plasma diagnosis based on current discharge measurements suggests an inelastic collision between the laser beam and the atoms from the plasma discharge. The morphology and surface properties of the obtained thin films differ between these two methods. While the amorphous character is dominant for TVA thin films, enabling a smooth surface, the LTVA method produces rough surfaces with prominent crystallinity, less hydrophobic character and lower surface energy. The smooth surfaces obtained by the TVA methods produce metallic electrodes with good electrical contact, ensuring better diodes and battery charge transport. Both methods allow uniform magnesium alloys to be obtained, but the laser used in the LTVA on the discharge plasma controls the added metal or element ratio. (c) 2024 Chongqing University. Publishing services provided by Elsevier B.V.

The compounds KBa 1-x Sr x Cr 2 (PO 4 ) 3 (with x = 0.00; 0.25; 0.50; 0.75; 1.00) were synthesized by a solid-state reaction, and they were thoroughly characterized by different spectroscopic and microscopic techniques. Their structures were indexed in a cubic system with a P2 1 3 space group forming a 3D framework built on CrO 6 octahedra and PO 4 tetrahedra sharing vertices leading to identical Cr 2 P 3 O 18 (U) units. The interconnection between the tetrahedral and octahedral groups leads to the formation of two large closed cavities (K, M II )(1) and (K, M II )(2), statistically occupied by K + and M 2+ (M = Ba, Sr) atoms. Electron paramagnetic resonance spectroscopy confirmed the presence of paramagnetic Cr 3+ ions, showing the effects of substituting the Ba 2+ ions with smaller Sr 2+ ions on the dipolar coupling between the Cr 3+ centers. The obtained materials and active carbon were used as electrode materials in hybrid SC devices. At the same time, their electrochemical properties were assessed by potentiostatic electrochemical impedance spectroscopy, cyclic voltammetry, and galvanostatic charge-discharge measurements, showing promising results with a maximal specific capacitance (3.86 F/g), energy density (343 mWh/kg), and power density (30.9 kW/kg) in the case of KBa 0.5 Sr 0.5 Cr 2 (PO 4 ) 3 , proving them as good candidates for positive and/or negative electrode materials for energy storage applications.

Quaternary multicomponent Cu2BaSnS4 (CBTS) has emerged as a potential absorber material due to its abundant and nontoxic constituents, high absorption coefficient (10-4 cm-1) and suitable bandgap (1.5-2.0 eV) for the solar photovoltaic application. In this study, polycrystalline CBTS thin layers have been deposited by a typical spray pyrolysis technique on glass substrates using different substrate temperatures (Ts = 200, 250, 300 and 350 degrees C) followed by annealing in a sulfur-rich atmosphere at 550 degrees C under an argon flow. The (micro-)structural, compositional, and optical properties of both types of films have been studied. Analysis of x-ray diffractogram (XRD) patterns for all acquired films showed the presence of polycrystalline CBTS alongside various secondary phases, including Cu2SnS3 being predominant. Nonetheless, the XRD of the films deposited at 250 degrees C and annealed at 550 degrees C showed only the CBTS phase. Raman spectroscopy confirm the formation of the trigonal phase of CBTS. The presence of Cu, Ba, Sn and S in CBTS thin films was confirmed by X-ray photoelectron spectroscopy and Energy-dispersive X-ray spectroscopy. Scanning electron micrographs show a smooth and dense structure with enhanced crystallinity and improved uniformity. Overall, the physical properties of CBTS thin films were found to be spray deposition temperature dependent. An appropriate optical band gap of 1.6 to 1.8 eV and a compact structure indicate their prospective for solar cell applications.

The hydroxyapatite and copper-doped hydroxyapatite coatings (Ca10-xCux(PO4)6(OH)2; xCu = 0, 0.03; HAp and 3CuHAp) were obtained by the vacuum deposition technique. Then, both coatings were analyzed by the X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and water contact angle techniques. Information regarding the in vitro antibacterial activity and biological evaluation were obtained. The XRD studies confirmed that the obtained thin films consist of a single phase associated with hydroxyapatite (HAp). The obtained 2D and 3D SEM images did not show cracks or other types of surface defects. The FTIR studies' results proved the presence of vibrational bands characteristic of the hydroxyapatite structure in the studied coating. Moreover, information regarding the HAp and 3CuHAp surface wettability was obtained by water contact angle measurements. The biocompatibility of the HAp and 3CuHAp coatings was evaluated using the HeLa and MG63 cell lines. The cytotoxicity evaluation of the coatings was performed by assessing the cell viability through the MTT assay after incubation with the HAp and 3CuHAp coatings for 24, 48, and 72 h. The results proved that the 3CuHAp coatings exhibited good biocompatible activity for all the tested intervals. The ability of Pseudomonas aeruginosa 27853 ATCC (P. aeruginosa) cells to adhere to and develop on the surface of the HAp and 3CuHAp coatings was investigated using AFM studies. The AFM studies revealed that the 3CuHAp coatings inhibited the formation of P. aeruginosa biofilms. The AFM data indicated that P. aeruginosa's attachment and development on the 3CuHAp coatings were significantly inhibited within the first 24 h. Both the 2D and 3D topographies showed a rapid decrease in attached bacterial cells over time, with a significant reduction observed after 72 h of exposure. Our studies suggest that 3CuHAp coatings could be suitable candidates for biomedical uses such as the development of new antimicrobial agents.

In view of their potential applicability in technology fields where magnets are required to operate at higher temperatures, the class of nanocomposite magnets with little or no rare earth (RE) content has been widely researched in the last two decades. Among these nanocomposite magnets, the subclass of magnetic binary systems exhibiting the formation of L10 tetragonal phases is the most illustrious. Some of the most interesting systems are represented by the Mn-based alloys, with addition of Al, Bi, Ga, Ge. Such alloys are interesting as they are less costly than RE magnets and they show promising magnetic properties. The paper tackles the case of MnGa binary alloys with various compositions around the Mn3Ga stoichiometry. Four MnGa magnetic alloys, with Mn content ranging from 70 at% to 75 at% were produced using rapid solidification to form the melt. By combining structural information arising from X-ray diffractometry and transmission electron microscopy with magnetic properties determined by vibrating sample magnetometry, we are able to document the nature and properties of the structural phases formed in the alloys in their as-cast state and upon annealing, the evolution of the phase structure after annealing and its influence on the magnetic behavior of the MnGa alloys. After annealing at 400 degrees C and 500 degrees C, MnGa alloys are showing a multiple-phase microstructure, consisting of co-existing crystallites of L10 and D022 tetragonal phase. As a consequence of these structurally and magnetically different phases, co-existing within the microstructure, promising magnetic features are obtained, with both coercive fields and saturation magnetization exceeding values previously reported for both alloys and layers of MnGa.

The development of kesterite (Cu2ZnSn(S,Se)4, CZTSSe) thin films for photovoltaic applications is highly necessary, given their composition of Earth-abundant, environmentally friendly elements and their compatibility with established photovoltaic technologies. This study presents a novel synthesis approach for CZTSSe films with varied S/(S+Se) ratios, ranging from 0.83 to 0.44, by a two-step magnetron sputtering deposition/annealing process. The first step consists in an initial deposition of stacked Mo/SnS2/Cu layers, which, upon thermal treatment in a sulfur atmosphere, were transformed into Cu2SnS3 (CTS) films. In the second step, further deposition of ZnSe and subsequent annealing in a tin and selenium atmosphere resulted in the formation of a CZTSSe phase. These processes were optimized to fabricate high-quality and single-phase CZTSSe films, thereby mitigating the formation of secondary phases. Characterization techniques, including scanning electron microscopy, demonstrated a clear correlation between decreased S/(S+Se) ratios and enhanced film densification and grain size. Moreover, grazing incidence X-ray diffraction and Raman spectroscopy confirmed a compositional and structural transition from close to CZTS to nearly a CZTSe phase as the S/(S+Se) ratios decreased. This study advances kesterite-based solar cell technology by enhancing the structural properties and crystallinity of the absorber layer, necessary for improving photovoltaic performance.

We explored the possibility to guide the forming process in a Ta/TiO2/Pt memristive device using an X-ray nanopatterning procedure, which enables the manipulation of the oxygen content at the nanoscale. The irradiation of selected areas of the sample by a 65 x 58 nm2 synchrotron X-ray nanobeam locally generated oxygen vacancies which resulted in the formation of a conductive filament in the desired position in the material. The subsequent application of an electric field between the electrodes was exploited to achieve reversible bipolar resistive switching. A multitechnique characterization was then performed, highlighting a local increase in the height of the crystal and the formation of a dislocation network, associated with the presence of Wadsley defects. Our results show that X-ray nanopatterning could open new avenues for a more deterministic implementation of electroforming in oxide-based memristive devices. We tuned the oxygen content in a Ta/TiO2/Pt memristive device at the nanoscale by a synchrotron X-ray nanobeam. We obtained a conductive filament of oxygen vacancies in the desired position in the material to achieve a controlled resistive switching.

Fabrication and extensive characterization of hard-soft nanocomposites composed of hard magnetic low-temperature phase LTP-MnBi and amorphous Fe70Si10B20 soft magnetic phase for bulk magnets are reported. Samples with compositions Mn55Bi45 + x center dot(Fe70Si10B20) (x = 0, 3, 5, 10, 20 wt.%) were prepared by spark plasma sintering of powder mixtures. Characterization has been performed by X-ray diffraction, scanning and transmission electron microscopy, magnetometry and Fe-57 Mossbauer spectroscopy. It was shown that samples contain crystallized and nanometric LTP-MnBi phases with various elemental compositions depending on the degree of Bi clustering. Complex correlations between starting compositions, processes during fabrication, and functional magnetic characteristics were observed. Unexpected special situations of the relation between microstructure and magnetic coupling mechanisms are discovered. Exchange spring effects of different strengths occur, being very sensitive to morpho-structural and compositional features, which in turn are controlled by processing conditions. An in-depth analysis of related microscopic characteristics is provided. Results of this work suggest that fabrication by powder metallurgy routes, such as spark plasma sintering of hard and soft magnetic powder mixtures, of MnBi-based composites with exchange spring phenomena have a high potential in designing and optimization of suitable materials with tunable magnetic properties towards rare-earth-free permanent magnet applications.

CuFeS2 is a prominent chalcogenide that possesses similar optical properties and a significantly lower cost, compared to gold. Additionally, covalent organic frameworks are a class of materials at the forefront of current research, mainly used as photoactive components and porous absorbers. Hence, in this work, hydrophilic CuFeS2 particles are coupled with multi-functional covalent organic frameworks through ionic bonding to produce a hybrid material with unique and optimized properties. To render the CuFeS2 particles negatively charged and dispersible in water, we coated them with sodium dodecyl sulfonate, shifting the surface plasmon resonance of the nanoparticles from 472 to 492 nm. When they are electrostatically assembled with the positively charged COFs, an S-scheme is formed and the fluorescence of the hybrid materials is highly quenched, with the electron transfer happening from the networks to the nanoparticles and a simultaneous energy exchange which is dependent on the emission wavelength. Through detailed fluorescence spectroscopy, time-resolved measurements and Stern-Volmer analysis, we identified an efficient emission quenching that differs from the bulk to the exfoliated hybrid system, while detailed electron microscopy studies demonstrated the strong interaction between the two components. The quenching mechanisms and the on or off surface resonance dependent lifetime could be applied to photocatalytic and photovoltaic applications.

Carbon monoxide (CO) is reversibly adsorbed on and desorbed from ferroelectric (001) oriented, BaO-terminated barium titanate. All processes are characterized in real time via photoelectron spectroscopy. Adsorption proceeds on different sites/geometries as a function of substrate temperature. Below room temperature, CO is adsorbed on surface Ba. At room temperature, adsorption proceeds on surface oxygen, whereas at high temperatures, "hollow" site adsorption occurs with carbon coordinated with three oxygens, one oxygen initially belonging to CO and two oxygens from the substrate. The amount of CO adsorbed is about one molecule for 10 surface unit cells, which is slightly increased at low temperatures. CO is desorbed if the substrate is heated above the Curie temperature, which is a sign of the definitory role of ferroelectric polarization. The BaTiO3(001) surface is unaffected by repeated cycles of adsorption-desorption.