In the present work, nanocrystalline NixCo1-xFe2O4 oxides with average crystallite size between 11 nm and 111 nm have been analyzed by Mossbauer spectroscopy, hysteresis loops, field cooled (FC) and zero field cooled (ZFC) magnetization measurements. A core-shell model has been proposed. Accordingly, the Mossbauer spectra evidence a ferrimagnetic core and a disordered shell (spin-glass), the latter increasing with Ni concentration. Hysteresis curves reveal the ferromagnetic nature of the investigated compounds and transformation from single- to multi-domain behaviour at a critical particle size dependent on Ni2+ ion concentration. The magnetic properties of finest powders (average crystallite size similar to 11 nm) are the most sensitive to the Ni2+ ions content. A general increase in the coercive field, H-C, with reducing temperature according to the modified Kneller's formula H-c(T) = H-c(0)[1-(T/T-B)(beta) where beta = 0.45 occurs. A high saturation magnetization of about 90 emu/g and an increase in H-C from about 0.3 kOe at 300 K to 7 kOe at 10 K have been observed for the sample Ni0.1Co0.9Fe2O4 (x = 0.1). Increasing magnetization and coercive field with reducing temperature are also explained within the core shell model. FC and ZFC data show strong dependence of the magnetic properties on crystallite size and concentration of Ni2+ ions.

In the present work, nanocrystalline NixCo1-xFe2O4 oxides with average crystallite size between 11 nm and 111 nm have been analyzed by Mossbauer spectroscopy, hysteresis loops, field cooled (FC) and zero field cooled (ZFC) magnetization measurements. A core-shell model has been proposed. Accordingly, the Mossbauer spectra evidence a ferrimagnetic core and a disordered shell (spin-glass), the latter increasing with Ni concentration. Hysteresis curves reveal the ferromagnetic nature of the investigated compounds and transformation from single- to multi-domain behaviour at a critical particle size dependent on Ni2+ ion concentration. The magnetic properties of finest powders (average crystallite size similar to 11 nm) are the most sensitive to the Ni2+ ions content. A general increase in the coercive field, H-C, with reducing temperature according to the modified Kneller's formula H-c(T) = H-c(0)[1-(T/T-B)(beta) where beta = 0.45 occurs. A high saturation magnetization of about 90 emu/g and an increase in H-C from about 0.3 kOe at 300 K to 7 kOe at 10 K have been observed for the sample Ni0.1Co0.9Fe2O4 (x = 0.1). Increasing magnetization and coercive field with reducing temperature are also explained within the core shell model. FC and ZFC data show strong dependence of the magnetic properties on crystallite size and concentration of Ni2+ ions.

AuxFe1-x nanophase thin films of different compositions and thicknesses were prepared by co-deposition magnetron sputtering. Complex morpho-structural and magnetic investigations of the films were performed by X-ray Diffraction, cross-section Transmission Electron Microscopy, Selected Area Electron Diffraction, Magneto Optical Kerr Effect, Superconducting Quantum Interference Device magnetometry and Conversion Electron Mossbauer Spectroscopy. It was proven that depending on the preparation conditions, different configurations of defect alpha-Fe magnetic clusters, i.e., randomly distributed or auto-assembled in lamellar or filiform configurations, can be formed in the Au matrix. A close relationship between the Fe clustering process and the type of the crystalline structure of the Au matrix was underlined, with the stabilization of a hexagonal phase at a composition close to 70 at. % of Au and at optimal thickness. Due to different types of inter-cluster magnetic interactions and spin anisotropies, different types of magnetic order from 2D Ising type to 3D Heisenberg type, as well as superparamagnetic behavior of non-interacting Fe clusters of similar average size, were evidenced.

The manipulation of magnetic anisotropy represents the fundamental prerequisite for the application of magnetic materials. Here we present the vectorial magnetic properties of nanostructured systems and thin films of Fe and FeCo prepared on linearly trenched Mo templates with thermally controlled periodicity. The magnetic properties of the nanosystems are engineered by tuning the shape, size, thickness, and composition parameters of the thin films. Thus, we control coercivity, magnetization, orientation of the easy axis of magnetization, and the long-range magnetic order of the system in the function of the temperature. We distinguish magnetic components that emerge from the complex morpho-structural features of the undulating Fe or FeCo nanostructured films on trenched Mo templates: (i) assembly of magnetic nanowires and (ii) assembly of magnetic islands/clusters. Uniaxial anisotropy at room temperature was proven, characterized, and explained in the case of all systems. Our work contributes to the understanding of magnetic properties necessary for possible further applications of linear systems and undulated thin films.

Epitaxial La0.7Sr0.3MnO3 films with different thicknesses (9-90 nm) were deposited on SrTiO3 (0 0 1) substrates by pulsed laser deposition. The films have been investigated with respect to morpho-structural, magnetic, and magneto-transport properties, which have been proven to be thickness dependent. Magnetic contributions with different switching mechanisms were evidenced, depending on the perovskite film thickness. The Curie temperature increases with the film thickness. In addition, colossal magnetoresistance effects of up to 29% above room temperature were evidenced and discussed in respect to the magnetic behavior and film thickness.

Magnetite (Fe3O4) and ferrite (MFe2O4, M = Mn, Zn) hydrophobic magnetic nanoparticles with various shapes and sizes were synthesized by high-temperature reaction of organic precursor solutions. Spherical, cubic, hexagonal, and octahedral shapes and sizes ranging from 10 to 100 nm were obtained. It has been proven that the reported high capability of tailoring the shape and the size of the surface-coated nanoparticles allows controlling a variety of properties that are relevant to many potential applications. Structurally well-formed hydrophobic magnetic nanoparticles with high saturation magnetization values are reported. The hydrophobic oleic acid shell was successfully transformed by a simple and environmentally friendly oxidative scission method into azelaic acid. The morphostructural characteristics, size distributions, chemical composition, and magnetic properties of the resulting hydrophilic nanoparticles were investigated by electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Mossbauer spectroscopy, superconducting quantum interference device, and vibrating sample magnetometry. Magnetic hyperthermia measurements have been performed in a specially designed sample holder placed in an inductor with copper windings assuring alternating magnetic fields of safely biological amplitude-frequency products. The optimal shape with a specific size range for nanoparticles dispersed in various carriers providing the best heating efficiency is reported.

The discovery of multifunctional properties related to electro-activity of organic systems of biomolecules is important for a variety of applications, especially for devices in the realm of biocompatible sensors and/or bioactuators. A further step towards such applications is to prepare thin films with the required properties. Here, the investigation is focused on the characterization of films of guanine and cytosine nucleobases, prepared by thermal evaporation-an industrial accessible deposition technique. The cytosine films have an orthorhombic non-centrosymmetric structure and grow in two interconnected nanostructured fractal patterns, of nearly equal proportion. Piezoresponse force microscopy images acquired at room temperature on the cytosine films display large zones with antiparallel alignment of the vertical components of the polarization vector. Guanine films have a dense nano-grained morphology. Our studies reveal electrical polarization switching effects which can be related to ferroelectricity in the films of guanine molecules. Characteristic ferroelectric polarization-electric-field hysteresis loops showing large electrical polarization are observed at low temperatures up to 200 K. Above this temperature, the guanine films have a preponderant paraelectric phase containing residual or locally induced nano-scopic ferroelectric domains, as observed by piezoresponse force microscopy at room temperature.

A complex investigation of the morpho-structural, magnetic, magneto-optical and magneto-transport properties of amorphous Fe-Gd thin films crossing the magnetization compensation point is reported and the unexpected observed magneto-functionalities are discussed. A tendency of magnetic domain formation with increasing the Fe content over the compensation concentration is observed. The switch from a reversed Magneto-optical Kerr Effect loop to a direct loop when increasing the Fe content over the compensation point is explained via the specific contribution to the rotation of the polarization vector from each magnetic sublattice, belonging to Fe and Gd, respectively. Local atomic configurations and magnetic interactions ascertained the amorphous character and revealed an out-ofplane orientation of the magnetic moment of Fe above the compensation point. The thermomagnetic curves prove a concentration dependent behavior, explained by weakly coupled magnetization relaxation processes of the two magnetic sub-lattices. On the other hand, the magnetic hysteresis loops gave evidence of two exchange coupled magnetic phases with different coercive fields. According to structural and Fe-57 Mossbauer Spectroscopy results, the two phases correspond to definite nanosized volumes of two different average concentrations (one of them closer to the compensation point) which are randomly distributed in the film. The unexpected single step-like behavior of the magneto-resistivity curves was explained by dissimilar switching of the spins in these two magnetic phases distributed in nano-sized volumes.

We report the facile and low-cost preparation as well as detailed characterization of dense arrays of passivated ferromagnetic nickel (Ni) nanotubes (NTs) vertically-supported onto solid Au-coated Si substrates. The proposed fabrication method relies on electrochemical synthesis within the nanopores of a supported anodic aluminum oxide (AAO) template and allows for fine tuning of the NTs ferromagnetic walls just by changing the cathodic reduction potential during the nanostructures' electrochemical growth. Subsequently, the experimental platform allowed further passivation of the Ni NTs with the formation of ultra-thin antiferromagnetic layers of nickel oxide (NiO). Using adequately adapted magnetic measurements, we afterwards demonstrated that the thickness of the NT walls and of the thin antiferromagneticNiO layer, strongly influences the magnetic behavior of the dense array of exchange-coupled Ni/NiO NTs. The specific magnetic properties of these hybrid ferromagnetic/antiferromagnetic nanosystems were then correlated with the morpho-structural and geometrical parameters of the NTs, as well as ultimately strengthened by additionally-implemented micromagnetic simulations. The effect of the unidirectional anisotropy strongly amplified by the cylindrical geometry of the ferromagnetic/antiferromagnetic interfaces has been investigated with the magnetic field applied both parallel and perpendicular to the NTs axis.

Local atomic configuration, phase composition and atomic intermixing in Fe-rich Fe1-xCrx and Fe1-xMox ribbons (x = 0.05, 0.10, 0.15), of potential interest for high-temperature applications and nuclear devices, are investigated in this study in relation to specific processing and annealing routes. The Fe-based thin ribbons have been prepared by induction melting, followed by melt spinning and further annealed in He at temperatures up to 1250 degrees C. The complex structural, compositional and atomic configuration characterisation has been performed by means of X-ray diffraction (XRD), transmission Mossbauer spectroscopy and differential scanning calorimetry (TG-DSC). The XRD analysis indicates the formation of the desired solid solutions with body-centred cubic (bcc) structure in the as-quenched state. The Mossbauer spectroscopy results have been analysed in terms of the two-shell model. The distribution of Cr/Mo atoms in the first two coordination spheres is not homogeneous, especially after annealing, as supported by the short-range order parameters. In addition, high-temperature annealing treatments give rise to oxidation of Fe (to haematite, maghemite and magnetite) at the surface of the ribbons. Fe1-xCrx alloys are structurally more stable than the Mo counterpart under annealing at 700 degrees C. Annealing at 1250 degrees C in He enhances drastically the Cr clustering around Fe nuclei.

Reduced-activation steels such as Eurofer alloys are candidates for supporting plasma facing components into kamak-like nuclear fusion reactors. In order to investigate the impact of hydrogen/deuterium insertion in their crystalline lattice, annealing treatments in hydrogen atmosphere have been applied on Eurofer slabs. The resulting samples have been analyzed with respect to local structure and atomic configuration both before and after successive annealing treatments, by X-ray diffractometry (XRD), scanning electron microscopy and energy dispersive spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS) and conversion electron Mossbauer spectroscopy (CEMS). The corroborated data point out for a bcc type structure of the non-hydrogenated alloy, with an average alloy composition approaching Fe0.9Cr0.1 along a depth of about 100 nm. EDS elemental maps do not indicate surface inhomogeneities in concentration whereas the Mossbauer spectra prove significant deviations from a homogeneous alloying. The hydrogenation increases the expulsion of the Cr atoms toward the surface layer and decreases their oxidation, with considerable influence on the surface properties of the steel. The hydrogenation treatment is therefore proposed as a potential alternative for a convenient engineering of the surface of different Fe-Cr based alloys.(C) 2017 Elsevier B.V. All rights reserved.

We present an investigation consisting of single walled carbon nanotubes (SWCNTs) based cryogenic temperature sensors, capable of measuring temperatures in the range of 2-77 K. Carbon nanotubes (CNTs) due to their extremely small size, superior thermal and electrical properties have suggested that it is possible to create devices that will meet necessary requirements for miniaturization and better performance, by comparison to temperature sensors currently available on the market. Starting from SWCNTs, as starting material, a resistive structure was designed. Employing dropcast method, the carbon nanotubes were deposited over pairs of gold electrodes and in between the structure electrodes from a solution. The procedure was followed by an alignment process between the electrodes using a dielectrophoretic method. Two sensor structures were tested in cryogenic field down to 2 K, and the resistance was measured using a standard four-point method. The measurement results suggest that, at temperatures below 20 K, the temperature coefficient of resistance average for sensor 1 is 1.473%/K and for sensor 2 is 0.365%/K. From the experimental data, it can be concluded that the dependence of electrical resistance versus temperature can be approximated by an exponential equation and, correspondingly, a set of coefficients are calculated. It is further concluded that the proposed approach described here offers several advantages, which can be employed in the fabrication of a microsensors for cryogenic applications.

A comparative study of morpho-structural, magnetic and magneto-transport properties of two Fe-Au granular films with different concentrations of Fe nanoclusters of almost similar size is reported. Different organizations of the Fe clusters, i.e. in lamellar-like or random-like configuration, were obtained by varying the amount of Fe in the Fe-Au films. The specific magnetic behaviour was investigated with respect to local structure and morpho-structural aspects by combining magneto-optic Kerr effect and superconducting quantum interference device magnetometry, Fe-57 conversion electron Mossbauer spectroscopy and a wide range of electron microscopy techniques. A strong in-plane magnetic texture with uniaxial anisotropy was observed in the case of the lamellar-like organization of the clusters (specific to the Fe-Au film with higher Fe concentration) whereas a superparamagnetic behaviour was evidenced in the case of random distribution of the clusters (specific to the Fe-Au film with lower Fe concentration), despite the similar average size of the clusters in the two samples. Specific magnetoresistance effects were investigated with respect to both the involved magnetic configurations and magnetic interactions of the Fe clusters.