National Institute Of Materials Physics - Romania

Willows from engineered wetland systems (EWS) offer a sustainable approach to wastewater treatment and biomass production. Our study assesses their potential for nutrient recovery and carbon sequestration using slow pyrolysis (600 degrees C) and hydrothermal carbonization (250 degrees C). Here, we propose EWS-pyrochars as a ready-to integrate opportunity for soil amendment, as they exhibit a predominant CO2 2 release and the absence of harmful compounds in pyrolysis-chromatograms, indicating higher stability than hydrochars. Using sequential Pextractions, we observed a high bioavailability in the willow-woodchips and a significant P-retention in EWSchars-up to 92 % in pyrochars and near-complete retention in hydrochars, along with a higher labile-P fraction of 21 % in hydrochars than 5 % in pyrochars. Utilizing X-ray-based techniques, Raman spectroscopy, scanning electron microscopy, and gas physisorption, we characterized the EWS-chars' structures. We revealed innovative 3D-visualizations, which transcend previous literature by providing insights into the chars' internal porosity and quantifying, for the first time, their carbonaceous structural thickness via a meshing algorithm and the mean Feret diameter. EWS-pyrochars exhibit remarkable aromaticity with a higher concentration of overall sp2 2 Catoms at 63 % vs. 43 % in hydrochars. Moreover, unlike hydrochars, which depict occluded porosity, EWSpyrochars exhibited 92 % water storage-like pores. Although hydrochars indicated lower carbonization and thermal stability than pyrochars, their higher carbon retention (55 vs. 41 % in pyrochar) suggest superior annual benefits-on a 10 ha EWS scale-of 80-tons of carbon sequestration and 334 kg of phosphorus recovery versus 60-tons of carbon and 298 kg of phosphorus with pyrochars. Our findings suggest innovative materials for resource recovery, advancing the engineered wetland systems field, shifting their traditional use, and opening the opportunity for future integration into biorefineries.

Plastics are omnipresent in the environment and degrade into smaller fragments in time. This study shows how plastics could reach nanometer sizes under specific conditions and the interaction of the nanofragments with prokaryotic cells. Imaging and spectroscopy techniques were employed to determine the modifications induced in artificially aged low-density polyethylene (LDPE). Scanning electron microscopy indicated that nanometer-scale LDPE could be obtained after ultraviolet-C (UVC) exposure for 10 days. Raman and Fourier-transformed infrared spectroscopy confirmed the chemical changes within the UVC-exposed LDPE are consistent with the increase of crystallinity. Moreover, the interaction between the degraded LDPE and chemo- and photosynthetic organisms was observed through fluorescence, confocal, electron microscopy techniques, and electron paramagnetic resonance spectroscopy. The results showed how micro/nano-LDPE could influence the development of Escherichia coli and Arthrospira platensis after only 72 h of interaction. This fundamental study indicates the environmental presence and effects of nanometer-sized LDPE resulting from light exposure.

A novel scaffold for in situ electrochemical detection of cell biomarkers was developed using electrospun nanofibers and commercial adhesive polymeric membranes. The electrochemical sensing of cell biomarkers requires the cultivation of the cells on/near the (bio)sensor surface in a manner to preserve an appropriate electroactive available surface and to avoid the surface passivation and sensor damage. This can be achieved by employing biocompatible nanofiber meshes that allow the cells to have a normal behavior and do not alter the electrochemical detection. For a better mechanical stability and ease of handling, nylon 6/6 nanofibers were collected on commercial polymeric membranes, at an optimal fiber density, obtaining a double-layered platform. To demonstrate the functionality of the fabricated scaffold, the screening of cellular stress has been achieved integrating melanoma B16-F10 cells and the (bio)sensor components on the transducer whereas the melanin exocytosis was successfully quantified using a commercial electrode. Either directly on the surface of the (bio)sensor or spatially detached from it, the integration of cell cultures in biosensing platforms based on electrospun nanofibers represents a powerful bioanalytical tool able to provide real-time information about the biomarker release, enzyme activity or inhibition, and monitoring of various cellular events.

Cu-doped hydroxyapatite (CuHAp) thin films were obtained using spin coating method. To make these thin films, CuHAp suspensions obtained by sol-gel method were used. The coatings obtained were thermally treated at 500 degrees C. After the thermal treatment, the thin films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM). Moreover, the stability of the suspensions before being used to obtain the thin films was certified by dynamic light scattering (DLS), zeta potential methods and ultrasound measurements. In the XRD patterns, the peaks associated with hexagonal hydroxyapatite were identified in accordance with JCPDS no. 09-0432. EDS and XPS results confirmed the presence of Cu ions in the samples. Data about the morphological features and chemical composition of CuHAp thin films were obtained by performing scanning electron microscopy (SEM) measurements. Our results suggest that the CuHAp thin films surface is continuous and homogenous. The presence of the functional groups in the CuHAp thin films was confirmed by Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy studies. Information about the surface topography of the CuHAp thin films has been obtained using atomic force microscopy (AFM). The AFM images determined that the surface topography of the CuHAp thin layer is homogenous and continuous without presenting any unevenness or fissures. The cytotoxicity of CuHAp thin films was assessed using human gingival fibroblasts (HGF-1) cells. The results of the cell viability assays demonstrated that the thin films presented good biocompatible properties towards the HGF-1 cells. Additionally, the adherence and development of HGF-1 cells on the surface of CuHAp thin films were determined using AFM. The AFM surface topographies highlighted that the CuHAp thin film's surface favored the attachment and proliferation of HGF-1 cells on their surface.

Infections related to orthopedic/stomatology surgery are widely recognized as a significant health concern. Therefore, the development of new materials with superior biological properties and good stability could represent a valuable alternative to the classical treatments. In this paper, the fluorine-substituted hydroxyapatite (FHAp) suspension, with the chemical formula Ca10(PO4)6(OH)2-2xF2x (where x = 0.05), was prepared using a modified coprecipitation technique. Stability studies were conducted by zeta potential and ultrasound measurements for the first time. The X-ray diffraction (XRD) patterns of FHAp powders displayed a hexagonal structure akin to that of pure hydroxyapatite (HAp). The XPS general spectrum revealed peaks corresponding to the constituent elements of fluorine-substituted hydroxyapatite such as calcium, phosphorus, oxygen, and fluorine. The purity of the obtained FHAp samples was confirmed by energy-dispersive X-ray spectroscopy (EDS) studies. The FHAp morphology was evaluated by scanning electron microscopy (SEM) measurements. Fourier-transform infrared spectroscopy (FTIR) studies were performed in order to study the vibrational properties of the FHAp samples. The FHAp suspensions were tested for antibacterial activity against reference strains such as Staphylococcus aureus 25923 ATCC, Escherichia coli ATCC 25922, and Candida albicans ATCC 10231. Additionally, the biocompatibility of the FHAp suspensions was assessed using human fetal osteoblastic cells (hFOB 1.19 cell line). The results of our biological tests suggest that FHAp suspensions are promising candidates for the future development of new biocompatible and antimicrobial agents for use in the biomedical field.

We model the equilibrium properties of a two-dimensional electron gas in a square lateral superlattice of quantum dots in a GaAs heterostructure subject to an external homogeneous perpendicular magnetic field and a far-infrared circular cylindrical photon cavity with one quantized mode, the TE011 mode. In a truncated linear basis constructed by a tensor product of the single-electron states of the noninteracting system and the eigenstates of the photon number operator, a local spin density approximation of density functional theory is used to compute the electron-photon states of the two-dimensional electron gas in the cavity. The common spatial symmetry of the vector fields for the external magnetic field and the cavity photon field in the long wavelength approximation enhances higher order magnetic single- and multiphoton processes for both the para- and the diamagnetic electron-photon interactions. The electron-photon coupling introduces explicit photon replicas into the band structure and all subbands gain a photon content, constant for each subband, that can deviate from an integer value as the coupling is increased or the photon energy is varied. The subbands show a complex Rabi anticrossing behavior when the photon energy and the coupling bring subbands into resonances. The complicated energy subband structure leads to photon density variations in reciprocal space when resonances occur in the spectrum. The electron-photon coupling polarizes the charge density and tends to reduce the Coulomb exchange effects as the coupling strength increases.

Tri-layered heterojunction devices based on oxide thin films are attracting significant attention for ultra-fast visible photodetection. However, the responsivity of these devices is still low. In this work, high performance photodetectors based on a tri-layered heterojunction of n-Si/p-Co3O4/n-ZnO were fabricated. Under no applied bias, a maximum responsivity and detectivity of 14.2 mA W-1 and 1.34 x 10(12) Jones were achieved respectively, for a power density of 9.35 mW cm(-2). Remarkably, a significant increase in the responsivity of approximately 864% was found when the device was biased at -2 V. This effect is understood based on the coupling of the photovoltaic and pyroelectric effects. Also, upon applying an external bias of -2 V, at a laser power density of 9.35 mW cm(-2) and at a chopper frequency of 10 Hz, the device exhibits a detectivity and sensitivity of 3.4 x 10(11) Jones and 2.2, respectively, together with a rise and fall time of 4 and 2 mu s, respectively. Compared to high performance Al/Si/SnO/ZnO/ITO and Au/pCuI/ZnO devices, our voltage-biased Al/Si/Co3O4/ZnO/ITO devices exhibit a >40% increase in R and >10x higher D*. Furthermore, an important advantage of our PDs is the p-type component, Co3O4, which is more stable and stoichiometric than CuI and SnO, ensuring PD performance that is stable with time. Therefore, n-Si/p-Co3O4/n-ZnO heterojunction devices shows great promise for ultrafast visible photodetection.

Plastics are indispensable materials for packaging and many products from our daily life, and their recycling is essential to ensure a circular economy. In this study, -SO3H-modified, Ti3C2-MXene was used as a recoverable solid acid catalyst for upcycling of polyethylene terephthalate (PET) to terephthalic acid (TPA) and ethylene glycol by hydrolysis. For the grafting of -SO3H groups to the Ti3C2Tx surface (where T-x represents the surface moieties, such as -OH or -O), sulfonation with an aryl diazonium salt obtained from sulfanilic acid was employed. X-ray photoelectron and Fourier transform infrared spectroscopy analyses provided a direct indication that sulfonation of the Ti3C2Tx was successfully performed, while X-ray diffraction and transmission electron microscopy analyses evidence the presence of -SO3H groups between the Ti3C2Tx layers due to the increases of the interlayer spacing through the intercalation of functional groups. The higher the concentration of acid groups, the higher the interlayer spacing. The depolymerization of PET in water occurred with a very good isolated yield in TPA (99%) for the MXene with the highest amount of sulfonic acid groups. We conclude that the acidity is mandatory to perform the hydrolysis reaction, in agreement with the acidity measurements, which show that the MXenes modified with the highest amount of derived sulfonic acids are the most active. Nevertheless, the accessibility to the acidic sites is a key factor that promotes the 2D acid-modified MXene materials as important catalysts for PET upcycling to TPA.

This paper describes the electrical and dielectric behavior of the nCdS/pZnTe HJ by current-voltage, capacitance-voltage characteristics, and impedance spectroscopy in a temperature interval 220-350 K. A microcrystalline p-ZnTe layer and n-CdS were grown on glass/ZnO substrate by closed space sublimation method. As frontal contact to CdS, the transparent ZnO and as a back contact to ZnTe, silver conductive paste (Ag) treated at 50 degrees C in vacuum were used. The current-voltage results of nCdS/pZnTe HJ show a rectifying behavior. The junction ideality factor, barrier height, and series resistance values were extracted from the rectifying curves at different temperatures. The built-in voltage, carrier concentration and depletion width were obtained from the capacitance-voltage measurements. Analysis of the J-V-T and C-V-T characteristics shows that the thermionic emission and recombination current flow mechanisms dominate in the nCdS/pZnTe HJ. The dielectric study reveals that the experimental values of the AC conductivity, dielectric constant, dielectric loss, the imaginary part of the electric modulus are found to be very sensitive to frequency and temperature. The dielectric constant and dielectric loss are observed to be high at the low frequency region. The increase in the values of electric modulus with the frequency implies an increase in the interfacial polarization at the interface of nCdS/pZnTe HJ. Jonscher's universal power law shows that with increasing frequency, AC conductivity increased. The results conductivity show that the ionic conductivity and interfacial polarization are the main parameters affecting the dielectric properties of the device when the temperature changes.